Land Rover Range Rover Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(279)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(279)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Land Rover Range Rover Power Steering Pump Replacement is $563 with $381 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Land Rover Range RoverV8-5.0L TurboService typePower Steering Pump ReplacementEstimate$1688.66Shop/Dealer Price$2019.97 - $2974.19
2015 Land Rover Range RoverV8-5.0L TurboService typePower Steering Pump ReplacementEstimate$1663.43Shop/Dealer Price$1986.08 - $2933.82
1994 Land Rover Range RoverV8-4.2LService typePower Steering Pump ReplacementEstimate$1029.64Shop/Dealer Price$1227.21 - $1806.75
2009 Land Rover Range RoverV8-4.4LService typePower Steering Pump ReplacementEstimate$951.51Shop/Dealer Price$1146.16 - $1720.62
1999 Land Rover Range RoverV8-4.0LService typePower Steering Pump ReplacementEstimate$1912.97Shop/Dealer Price$2345.20 - $3622.25
2007 Land Rover Range RoverV8-4.2L TurboService typePower Steering Pump ReplacementEstimate$951.51Shop/Dealer Price$1146.48 - $1721.18
2006 Land Rover Range RoverV8-4.4LService typePower Steering Pump ReplacementEstimate$951.51Shop/Dealer Price$1146.20 - $1720.69
1993 Land Rover Range RoverV8-4.2LService typePower Steering Pump ReplacementEstimate$1464.76Shop/Dealer Price$1771.11 - $2676.98
Show example Land Rover Range Rover Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Land Rover mechanics

Real customer reviews from Land Rover owners like you.

Excellent Rating

(279)

Rating Summary
267
4
1
2
5
267
4
1
2
5

Salvador

19 years of experience
14 reviews
Salvador
19 years of experience
Rover Range Rover 2011 - Oil Change - Frederick, MD
Salvador serviced my second vehicle. Just as the first encounter, Salvador was timely, informative, and courteous. He has very extensive knowledge and experience in domestic and foreign vehicles. It was nice to discuss future services for my vehicles. I highly recommend Salvador for all your vehicle maintenance needs.

William

17 years of experience
48 reviews
William
17 years of experience
Rover Range Rover 2004 - Electric Problems - Mesa, AZ
He knows what he does. His explation was very clear. He was on time.

Adrian

11 years of experience
26 reviews
Adrian
11 years of experience
Rover Range Rover 2006 - Tail Light Lens - Duluth, GA
Adrian was awesome!! We will definitely use him again!!

Simon

5 years of experience
21 reviews
Simon
5 years of experience
Rover Range Rover 2003 - Oil/Fluid Leak - Jacksonville, FL
He's a good mec mechanic

Excellent Rating

(279)

Rating Summary
267
4
1
2
5
267
4
1
2
5
Number of Land Rover Range Rover services completed
3069+
services done by our mechanics
TOTAL NUMBER OF EXPERT Land Rover MECHANICS
600+
experts on our platform

Recent articles & questions

2011 Dodge Ram vs. 2011 Ford F-150: Which One Should I Buy?
Large trucks can be fun to drive, and even more fun to get dirty. Unfortunately, they may also cause you to get phone calls from friends who need to move into a new apartment. Fortunately, just having a truck may...
How to Adjust Drive Belts
Drive belts power electrical systems and other features in your car. An improperly adjusted drive belt can cause damage to your engine.
P2193 OBD-II Trouble Code: System Too Lean at Higher Load Bank 2
P2193 P2193 code definition System Too Lean at Higher Load Bank 2 What the P2193 code means P2193 is an OBD-II generic code for the Engine Control Module (ECM) detecting the fuel control has reached its rich limits when the...

Truck barely starts.

It sounds like you have two separate issues. First it seems like you have a drain on your battery, or the battery is simply just bad and due for replacement. Your second issue of jumping in place and eventually stalling...

Fan blower stopped working

Hi, thanks for writing in. I'd be happy to provide my insight. There are a few other possibilities with this scenario. The blower switch (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-blower-motor-switch), the blower motor itself, function switch or the blower fan relay (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-blower-motor-relay) could have a...

My Mitsubishi Lancer 2005 has a limp mode issue - the car does not erase trouble codes permanently (even by debugging or terminal disconnection)

I see the note where you have previously replaced several components on the transmission already. Do you recall the brand and warranty of these components? If the parts you replaced are still under warranty, you may be able to get...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com