Kia Spectra Loud noises when car is put in gear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(349)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(349)

Loud noises when car is put in gear Inspection Service

How much does a Loud noises when car is put in gear Inspection cost?

On average, the cost for a Kia Spectra Loud noises when car is put in gear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Kia SpectraL4-2.0LService typeLoud noises when car is put in gear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2009 Kia SpectraL4-2.0LService typeLoud noises when car is put in gear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2004 Kia SpectraL4-1.8LService typeLoud noises when car is put in gear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2002 Kia SpectraL4-1.8LService typeLoud noises when car is put in gear InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2005 Kia SpectraL4-2.0LService typeLoud noises when car is put in gear InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2001 Kia SpectraL4-1.8LService typeLoud noises when car is put in gear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2006 Kia SpectraL4-2.0LService typeLoud noises when car is put in gear InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2003 Kia SpectraL4-1.8LService typeLoud noises when car is put in gear InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Kia Spectra Loud noises when car is put in gear Inspection prices

When you put your car in gear, there should be minimal noise. The transmission should engage easily, and you should be able to drive without any effort. If you’re hearing loud noises when the car is put in gear, it could be one of several different problems depending on the type of noise in question and when exactly you’re hearing it. It may not even be related to the transmission.

How this system works:

When you put your car in gear, it puts a load on both the engine and the transmission. When you press the gas, that load changes. For this reason, engines and transmissions have mounts. These mounts cushion, support and secure both the engine and transmission, ensuring that the loading doesn’t translate into loud clunks, thunks, bangs and other abnormal sounds.

In addition, a number of things must happen when you put your car in gear (these will vary drastically depending on whether you’re driving a car with a manual or an automatic transmission). For instance, with a manual transmission, you must press in the clutch pedal, which engages the clutch and allows you to shift gears. If the clutch is worn, you may hear a grinding or screeching sound here.

In an automatic transmission, things work a little differently. There are clutch plates throughout, as well as bands that connect each gear. If either the clutch plates or the bands have suffered wear, it’s possible you’ll hear noises when the transmission changes gears.

Common reasons for this to happen:

  • Low Transmission Fluid: The most common reason for any transmission-related problem is low fluid. Your transmission requires the right amount of fluid to operate, and to protect internal components from wear and tear, heat and friction.

  • Failed Motor Mount: Another common cause of hearing a noise when putting your car into gear is a failed motor mount. Different makes and models use different types of mounts. Some are little more than rubber blocks, while others are hydraulic units. In either instance, a failed mount (or a missing motor mount bolt) will create a very loud noise when you put your car in gear.

  • Failing U-Joint: If you have a rear-wheel drive vehicle, the problem might not be with the engine or transmission, but with the drive shaft. A bad U-joint can cause a very loud sound when putting the car into gear. Play in the joint allows the shaft to flex incorrectly, causing noises and vibrations.

  • Worn Clutch: If you have a manual transmission, it’s possible that the clutch is worn out. This would make a screeching/grinding noise when attempting to put the car in gear.

  • Failing Pilot Bearing: This problem is only pertinent to manual transmissions, and only when engaging the clutch (pressing the clutch pedal in).

  • Failing Throw Out Bearing: If you hear a noise from your manual transmission when releasing the clutch, it could be a failed throw out bearing.

What to expect:

A professional mobile mechanic will visit your home or office to inspect the noise your car is making when putting it into gear. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to crank the car, and then put it in gear to verify and duplicate the noise. Based on this test, the mechanic will either have a diagnosis, or will need to inspect other components of the vehicle to verify their condition and operation. The actual steps taken will depend on the type of noise you’re hearing.

How important is this service?

Unusual noises when putting your car in gear should always be cause for alarm. It might be something relatively simple like a failed U-joint, but it might be a sign of transmission damage, or a failed motor mount, both of which are serious problems. One of our professional mechanics can diagnose and repair the problem for you.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Kia mechanics

Real customer reviews from Kia owners like you.

Excellent Rating

(349)

Rating Summary
336
10
0
1
2
336
10
0
1
2

Tabitha

17 years of experience
319 reviews
Tabitha
17 years of experience
Kia Spectra L4-2.0L - Control Arm Assembly Replacement (Front Lower Right) - San Diego, California
Tabitha was on time and very thorough. She was a professional answering all my questions. It was a pleasure having Tabitha take care of my car.

Larry

16 years of experience
114 reviews
Larry
16 years of experience
Kia Spectra L4-2.0L - Control Arm Assembly Replacement (Front Lower Left) - Columbus, Ohio
Great guy!

Omar

12 years of experience
287 reviews
Omar
12 years of experience
Kia Spectra L4-2.0L - Heater is not working - Fort Lauderdale, Florida
Omar is great mechanic. Has skill, courtesy,

Aaron

10 years of experience
72 reviews
Aaron
10 years of experience
Kia Spectra L4-2.0L - Power Steering Belt - Austin, Texas
Aaron did a wonderful job. He arrived on time & we're extremely happy with his work.

Excellent Rating

(349)

Rating Summary
336
10
0
1
2
336
10
0
1
2
Number of Kia Spectra services completed
3839+
services done by our mechanics
TOTAL NUMBER OF EXPERT Kia MECHANICS
1000+
experts on our platform

Recent articles & questions

How Long Does an Air Filter Last?
Every Every internal combustion engine needs air in order to work. Without it, fuel does not burn and provide the force needed to deliver power to the engine. Additionally, the air has to be clean. Otherwise, dust and debris will...
P0143 OBD-II Trouble Code: O2 Sensor Circuit Low voltage (Bank 1, Sensor 3)
Diagnostic Diagnostic Trouble Code (DTC): P0143 P0143 code definition O2 Sensor Circuit Low voltage (Bank 1 Sensor 3) What the P0143 code means P0143 is the OBD-II generic code indicating that the Engine Control Module (ECM) input from the O2...
Indiana Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Indiana. Speed limits in Indiana 70 mph: interstate highways (for cars) 65 mph: interstate highways (for trucks with...

How do I turn off the TRAC system?

The TRAC or traction control system is designed to help you stay in control on the road. There may be times you need to shut it off, such as if you get stuck in the snow or mud. Locate the...

Do I need a new alternator?

Hi, thanks for writing in. I'd be happy to provide my insight. This kind of problem may be caused by the alternator not charging at all (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-alternator). The charging system should be tested and checked first to make sure a...

My code reader says I have a bad mass air flow sensor ans crank shat sensor test drive ran better shut off & engine Lt. Same code

Hi there. The problem you are describing, sounds like you may have a poor connection in the connector at the mass airflow sensor. Although, sometimes aftermarket parts do not perform as well as factory (OEM) parts. Check for corrosion and/or...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com