Kia Forte Koup Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(41)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(41)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Kia Forte Koup Power Steering Pressure Hose Replacement is $379 with $239 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Kia Forte KoupL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$832.34Shop/Dealer Price$1005.28 - $1515.98
2011 Kia Forte KoupL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$623.89Shop/Dealer Price$745.20 - $1105.00
2010 Kia Forte KoupL4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$623.89Shop/Dealer Price$745.22 - $1105.04
2012 Kia Forte KoupL4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$623.89Shop/Dealer Price$745.22 - $1105.04
2010 Kia Forte KoupL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$623.89Shop/Dealer Price$746.70 - $1107.62
2013 Kia Forte KoupL4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$623.89Shop/Dealer Price$745.36 - $1105.29
2012 Kia Forte KoupL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$623.89Shop/Dealer Price$745.24 - $1105.07
2011 Kia Forte KoupL4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$623.89Shop/Dealer Price$745.22 - $1105.04
Show example Kia Forte Koup Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Kia mechanics

Real customer reviews from Kia owners like you.

Excellent Rating

(41)

Rating Summary
41
0
0
0
0
41
0
0
0
0

Brikk

19 years of experience
389 reviews
Brikk
19 years of experience
Kia Forte Koup L4-2.0L - Brake Pads Replacement (Front) - Charlotte, North Carolina
Clean, professional and knowledgeable.....a great trusted mechanic!

Eladio

11 years of experience
148 reviews
Eladio
11 years of experience
Kia Forte Koup L4-2.4L - Combination Switch Assembly - Greensboro, North Carolina
Eladio was great and very professional. Completed the service needed in a timely manner. I will definitely be booking him again in the future.

Joel

12 years of experience
177 reviews
Joel
12 years of experience
Kia Forte Koup L4-2.4L - Brake Pads Replacement (Front, Rear) - Lewisville, Texas
Arrived on time and was courteous and professional. No issues after a week of driving.

Brandon

21 years of experience
773 reviews
Brandon
21 years of experience
Kia Forte Koup L4-2.0L - Brake Pads Replacement (Front) - Orlando, Florida
Brandon rocks! He was friendly, knowledgeable, and quick! I couldn't have asked for a more positive experience!

Excellent Rating

(41)

Rating Summary
41
0
0
0
0
41
0
0
0
0
Number of Kia Forte Koup services completed
451+
services done by our mechanics
TOTAL NUMBER OF EXPERT Kia MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Get an Alaska Driver's Permit
In In order to begin driving on the roads in Alaska, anyone under the age of 16 years old must apply for and receive an Alaska Instruction Permit. This driver’s permit allows those who are at least 14 years old...
P0605 OBD-II Trouble Code: Internal Control Module ROM Error
P0605 P0605 code definition Internal Control Module ROM Error (Module Identification Defined by SAE J1979) What the P0605 code means The Engine Control Module (ECM) is responsible for many major vehicle functions such as ignition timing, anti lock-braking, fuel injection,...
How to Replace a Heater Control Valve
Car heater control valves regulate the flow of coolant into the cabin. Heating and cooling issues result when the heater control valve fails.

Air conditioning leak

Hello. If your AC system is suddenly not blowing cold, then it may indeed be low due to a leak. In some cases, you can take a look at all of the AC system hoses and connections and if any...

My car's gas pedal goes out and the car won't drive anymore if my RPM reaches the number 3 on the gauge.

Hello, I would start by extracting the problem codes from engine management and the transmission as well. You don't mention it, but surely the Check Engine light is on at this point. These codes will help determine a strategy for...

Ignition module

A flashing check engine light typically signifies a misfire. Misfiring will ruin the catalytic converter so do try to get this resolved promptly or don't use the car until the problem is resolved to avoid further damage. If a new...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com