Jeep Wrangler JK Car is hesitating and bucking Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(7)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(7)

Car is hesitating and bucking Inspection Service

How much does a Car is hesitating and bucking Inspection cost?

On average, the cost for a Jeep Wrangler JK Car is hesitating and bucking Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Jeep Wrangler JKV6-3.6LService typeCar is hesitating and bucking InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Jeep Wrangler JK Car is hesitating and bucking Inspection prices

When you press the gas pedal, you expect the engine to rev and the car to accelerate. If your fuel delivery system, ignition components and exhaust system are all working properly, that’s what happens. However, even just one problem in any of the systems mentioned could lead to your car hesitating and bucking under acceleration, during deceleration, or at idle.

How this system works:

When you press the gas pedal, the fuel pump sends gasoline through the fuel filter, up the fuel line, and to the injectors. The injectors “atomize” the gas, and spray it into the injectors (atomization just means it turns it into a very fine mist). There, the spark plugs ignite the gasoline, which combusts, moving the pistons and turning the engine.

Gasoline combustion creates fumes (exhaust), which must be vented. This is done through a relatively complex network of components. Most of the exhaust is sent through the exhaust manifold, the catalytic converter, and then out the exhaust pipe. Along the way, some of it is recirculated and burned again (using the EGR valve), and oxygen sensors monitor the exhaust process for the right levels of contaminants.

Common reasons for this to happen:

  • Clogged Fuel Filter: Over time and through normal use, your fuel filter will become dirty and clogged. When this happens, the flow of gasoline to your engine diminishes, which can cause hesitation and bucking.

  • Failing Fuel Pump: If your fuel pump begins to fail, it will not send the right amount of gasoline to the engine. Note that pumps can exhibit intermittent problems for a long time before they fail completely.

  • Failed Oxygen Sensor: If one of the oxygen sensors in your exhaust system has failed, the computer cannot monitor the emissions, and pressure may drop, creating hesitation and bucking.

  • Clogged EGR Valve: The EGR valve is a crucial component in the exhaust system. If it becomes clogged with carbon, it won’t operate correctly, and your engine may spit, sputter or hesitate.

  • Worn Out Spark Plugs and Wires: In order to combust gasoline correctly, your engine needs a steady spark and stream of electricity. This is provided by the spark plugs and wires. If they’re worn out, your engine may spit and sputter.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the engine and verify the hesitation and bucking, as well as when the condition occurs. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will connect a diagnostic computer to your car’s OBDII connection and read any trouble codes in the computer (even if the Check Engine light is not on, trouble codes may be stored). The mechanic may need to test drive the vehicle as well to verify the symptoms.

How important is this service?

You need reliable performance from your engine. Even if the hesitation and bucking doesn’t cause internal damage, it can be extremely disconcerting to drive while these symptoms are present. It can also compromise your safety on the road. Regular maintenance is the best way to protect against hesitation and bucking. Make sure you’re having the spark plugs, wires and fuel filter replaced regularly. You should also have any Check Engine light diagnosed immediately. One of our professional mechanics can troubleshoot, diagnose and repair your car, eliminating the hesitation and bucking during operation.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Michael

18 years of experience
45 reviews
Michael
18 years of experience
Jeep Wrangler JK V6-3.6L - Radiator - Rockville, Maryland
Great experience, Michael was very professional and showed up early. He was also extremely knowledgeable and very accommodating.

Roberto

12 years of experience
308 reviews
Roberto
12 years of experience
Jeep Wrangler JK V6-3.6L - Car is not starting - Houston, Texas
Great

Marco

11 years of experience
73 reviews
Marco
11 years of experience
Jeep Wrangler JK V6-3.6L - Brake Pads Replacement (Front, Rear) - Perris, California
Awesome job on both of my vehicles

Jesus

7 years of experience
33 reviews
Jesus
7 years of experience
Jeep Wrangler JK V6-3.6L - Oil Change - Coronado, California
ON Time, Professional, Clean , Service Oriented,

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Jeep Wrangler JK services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Engine Mount
Common signs include impact noises, excessive vibrations, and engine movement.
How to Apply a Clear Base Coat to a Car
Much Much of a vehicle's appeal has nothing to do with its performance and is purely superficial. Although a car's speed and agility on the road is important, it means very little in terms of the total package if it...
Rules of the Road For Texas Drivers
Driving Driving in Texas is a lot like driving anywhere else in the United States, but there are a few key differences. Whether you’re new to the state or you’ve lived here for years, if it’s been awhile since you...

What does the Service StabiliTrak message mean?

The Service StabiliTrak message can appear in the driver information center (DIC). When the DIC displays this alert, the StabiliTrak system is not properly working, and needs to be serviced. When the StabiliTrak issue is resolved, the alert will go...

5.7l cuts out when you throttle the engine from a stop. Gets going sometime then hesitates. When it gets to 50 mph it runs fine.

Hi there. Check the IAC (https://www.yourmechanic.com/services/idle-control-valve-replacement) (idle air control valve) and see if its functioning. If the engine is having an issue with stumbling, the IAC could be causing the engine to stall out. If the IAC is working properly,...

Should the rpm drop to zero while sitting idle with the engine on

On these type of issues where the cluster sometimes do erratic things you can do a battery cable reset by disconnecting the battery cables and touching them together for three minutes and then reconnecting them to the battery. When you...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com