Jeep Wagoneer Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(55)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(55)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Jeep Wagoneer Power Steering Pump Replacement is $224 with $84 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Jeep WagoneerL6-4.0LService typePower Steering Pump ReplacementEstimate$499.42Shop/Dealer Price$564.52 - $746.05
Show example Jeep Wagoneer Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(55)

Rating Summary
53
2
0
0
0
53
2
0
0
0

Jeff

34 years of experience
441 reviews
Jeff
34 years of experience
Jeep Wagoneer L6-4.0L - Starter - Davis, California
Jeff was fantastic I was sceptic all about using this service and he made it amazing did a great job in a timely manner really can't say enough good things about this experience!

Ben

42 years of experience
1589 reviews
Ben
42 years of experience
Jeep Wagoneer L6-4.0L - Automatic Transmission Fluid Service - Houston, Texas
Ben did a fantastic job!

Robert

21 years of experience
1307 reviews
Robert
21 years of experience
Jeep Liberty V6-3.7L - Power Steering Pump - Denver, Colorado
Robert is the best! Super friendly and knowledgeable

Joseph

21 years of experience
60 reviews
Joseph
21 years of experience
Jeep Grand Cherokee V8-5.2L - Power Steering Pump - Austin, Texas
Always happy with this guy :)

Excellent Rating

(55)

Rating Summary
53
2
0
0
0
53
2
0
0
0
Number of Jeep Power Steering Pump Replacement services completed
605+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

P3419 OBD-II Trouble Code: Cylinder 3 Deactivation/Intake Valve Control Circuit Low
P3419 means a problem was detected with the cylinder deactivation mode due to bad lifters, sensors, solenoids, electrical issues, or low oil pressure.
How to Insure a Car With Modifications
There There are a lot of reasons why vehicle owners may make customizations (https://www.yourmechanic.com/article/how-to-customize-a-car) to a car, from getting a custom paint job to reflect a favored color to making internal tweaks to satisfy a need for speed. While cosmetic...
P0844 OBD-II Trouble Code: Transmission Fluid Pressure Sensor/Switch A Circuit Intermittent
P0844 means there is an issue with the voltage signal from the transmission fluid pressure sensor, possibly due to a faulty sensor or fluid issues.

Car only cranking

There can be a variety of reasons as to why your Mazda Millenia will crank but not start. We can eliminate the starter and battery as a concern, since we know from the description that it cranks, therefore I would...

Navigation Screen is black and radio turns off every few minutes.

Hello. Unfortunately there is no reset for this. When this occurs it is because there is a short within the navigation unit. When this occurs it requires that the entire unit be replaced with a new one or a different...

Put a new lock cylinder in and key wont turn and is stuck

The key and lock cylinder is not the problem most likely unless the key is not cut correctly. The most common cause is the key lock rod mechanism between lock cylinder and the ignition switch or the ignition switch is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com