Jeep Grand Wagoneer L Clutch is not fully disengaging Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(7,424)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(7,424)

Clutch is not fully disengaging Inspection Service

How much does a Clutch is not fully disengaging Inspection cost?

On average, the cost for a Jeep Grand Wagoneer L Clutch is not fully disengaging Inspection is $140 with $0 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2024 Jeep Grand Wagoneer LL6-3.0L TurboService typeClutch is not fully disengaging InspectionEstimate$155.00Shop/Dealer Price$158.60 - $161.30
2023 Jeep Grand Wagoneer LL6-3.0L TurboService typeClutch is not fully disengaging InspectionEstimate$145.99Shop/Dealer Price$147.82 - $149.20
Show example Jeep Grand Wagoneer L Clutch is not fully disengaging Inspection prices

Your car’s clutch is what allows you to change gears. When you press the clutch pedal, the clutch moves away from flywheel, stopping the rotation and allowing you to shift to a higher or lower gear without causing damage (grinding gears does your transmission no good at all). When you release the clutch pedal, the clutch should press up against the flywheel and you should be able to proceed in the newly selected gear. However, there are some situations in which the clutch may not fully disengage.

How this system works:

To put it in a nutshell, clutches work based on friction. When the clutch pedal is pressed, either a cable or a piston (depending on the type of clutch is installed in your vehicle) will push the release fork. This causes the throw out bearing to press against the diaphragm spring.

The center of the spring is pushed in, which engages a series of pins. These pull the pressure plate away from the clutch disc and separate the clutch from the engine flywheel. When you take your foot off the pedal, the reverse happens, and the clutch is engaged.

Clutch components are subject to a significant amount of wear and tear (because they work on friction – this is normal). The most common problem here is the disc wearing. The material is a lot like what you’ll find on your brake pads, and the operating concept is also very similar. Of course, that creates slippage, which isn’t the problem here. Failure to disengage is called “sticking”, and there are several potential causes.

Common reasons for this to happen:

  • Stretched/Broken Clutch Cable: If the clutch cable is broken or stretched, then the clutch will stick (not disengage). You’ll notice the sticking becoming more and more common as the cable continues to stretch.

  • Leaking Hydraulic System: If you have a hydraulic clutch, it’s possible that either the slave or master cylinder (or both) is leaking. This means that insufficient hydraulic pressure is built up for the clutch system to operate correctly.

  • Misadjusted Linkage: The linkage connects the clutch pedal to the transmission. If it’s incorrectly adjusted, the clutch may not disengage properly.

  • Incompatible Aftermarket Parts: If you’ve recently had clutch work done, it’s possible that aftermarket components were installed in your car. Not all aftermarket parts will work correctly with your clutch, and this can cause it to not fully disengage.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the entire clutch system and determine the source and cause of the problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to inspect the clutch, as well as the cable or hydraulic system. Both a visual inspection and a test drive may be required. Once the underlying cause has been determined, the mechanic will recommend the next step.

How important is this service?

If your clutch is not fully disengaging, it means that the flywheel and clutch disc are not fully separating. This causes additional wear not only on the clutch material, but on other components in the system (including the input shaft).

The best defense against transmission problems is to ensure that you work with a reputable mechanic for general maintenance who can inspect and troubleshoot problems as they arise. It’s also important to ensure that any aftermarket clutch components installed are fully compatible with your vehicle. If you’re experiencing problems with the clutch not fully disengaging, one of our professional mechanics can inspect and repair the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(7,424)

Rating Summary
7,058
200
38
25
103
7,058
200
38
25
103

William

35 years of experience
731 reviews
William
35 years of experience
Jeep Wrangler V6-3.6L - Clutch is not fully disengaging - Sun City, Arizona
William came by on time and helped me get a professional second opinion on my Jeep Wrangler's clutch problems. His diagnosis was thorough and precise. He explained what needed to be done to fix my Jeep and took the time to explain why. If I know someone that needs help in the future, William will be my first recommendation

Jonathan

36 years of experience
522 reviews
Jonathan
36 years of experience
Jeep Grand Cherokee L6-4.0L - Car is not starting - Brooksville, Florida
He knows his stuff--great

Gerron

35 years of experience
185 reviews
Gerron
35 years of experience
Jeep Liberty V6-3.7L - Radiator - Gresham, Oregon
Gerron was the friendlies mechanic I have spoken to in a long time. He knew exactly what he was doing and did it in a timely manner. I will tell all my friends and family to use him in the future.

Stefan

18 years of experience
367 reviews
Stefan
18 years of experience
Jeep Compass L4-2.0L - Brake System Flush - Hercules, California
Stefan was very professional and had informed me everything he did on my car. He performed the services and also recommended me to keep an eye on other points that I'll need to get service on it after a while.

Excellent Rating

(7,424)

Rating Summary
7,058
200
38
25
103
7,058
200
38
25
103
Number of Jeep services completed
81664+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

How Long Does a Variable Valve Timing (VVT) Solenoid Last?
One One of the biggest concerns that most people have about their car is how it runs and idles. Most car owners fail to realize just how many different components have to work together in order for this type of...
The Traveler’s Guide to Driving in Poland
Poland Poland has a lot more to offer to travelers than many realize. Once you start to see all of the interesting (http://opentravel.com/Things-To-Do-In-Poland-Attractions) things there are to do and see in the country, you can see why it is starting...
P3416 OBD-II Trouble Code: Cylinder 2 Exhaust Valve Control Circuit High
P3416 means an issue in engine cylinder number 2 which may cause vehicle to not be able to switch over to lower power mode such as v4.

Why does my car give a kick back?

Hi there. The most common thing that I have seen that causes this on your vehicle is a bad engine mount. When one of these fails the engine can move when it is started or when shifting gears. When this...

2001 Chevy suburban blowing hot air only in front vents, rear system works fine, also once selector switch is turned on it cannot

The issue with the selector switch is likely electrical in nature. It can be diagnosed along with the non functioning from a/c system problem. Hot air in the front, when you have functioning a/c in the rear, could be due...

Have a 2014 scion xb and just installed new throttle body a month due to a scanner code P2109 but car still jerks

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com