logo

Jeep Compass Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(266)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(266)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Jeep Compass Wheel Bearings Replacement is $244 with $104 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Jeep CompassL4-2.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$455.50Shop/Dealer Price$516.65 - $687.95
2017 Jeep CompassL4-2.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$534.19Shop/Dealer Price$615.74 - $854.20
2015 Jeep CompassL4-2.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$441.99Shop/Dealer Price$500.52 - $669.87
2014 Jeep CompassL4-2.4LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$455.81Shop/Dealer Price$535.12 - $768.88
2013 Jeep CompassL4-2.0LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$455.81Shop/Dealer Price$536.60 - $771.46
2010 Jeep CompassL4-2.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$441.99Shop/Dealer Price$500.73 - $670.23
2009 Jeep CompassL4-2.4LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$455.81Shop/Dealer Price$535.14 - $768.91
2018 Jeep CompassL4-2.4LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$480.27Shop/Dealer Price$562.23 - $803.52
Show example Jeep Compass Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Jeep Compass services completed
2926+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(266)
Rating Summary
253
8
1
1
3
253
8
1
1
3

Salvador

19 years of experience
14 reviews
Request Salvador
Salvador
19 years of experience
Request Salvador
by William James Moore Jr
Compass 2010 - Not able to change gears - Germantown, MD
Very knowledgeable and helpful. Will use him again if possible.

Colby

13 years of experience
34 reviews
Request Colby
Colby
13 years of experience
Request Colby
by Bobie King
Compass 2016 - Throttle Body - Denver, CO
Colby has been extremely helpful and even came over on what would have been his normal day off to make sure my vehicle was fixed.

Deuwn

0 years of experience
33 reviews
Request Deuwn
Deuwn
0 years of experience
Request Deuwn
by Mary Betts
Compass 2012 - Oil Change - Washington, DC
OMG! What professionalism. Deuwn arrived a few minutes ahead of his scheduled time. He was dressed for success. He was very cordial and went right to work. He expertly and expeditiously completed my oil change in no time. I highly recommend Deuwn for your car-care needs.

Refugio

20 years of experience
49 reviews
Request Refugio
Refugio
20 years of experience
Request Refugio
by Ken Fries
Compass 2012 - Oil Pan Gasket - San Antonio, TX
Refugio was great. He can out to replace oil pan seal, after further inspection it was found that the pan itself was slightly bent and that just replacing the seal might not solve the problem. So, he informed me and I accepted his suggestions. The pan was ordered and work was rescheduled for the next day. I appreciated his honesty, most would have done the work asked and not worry about the rest.

Excellent Rating

(266)
Rating Summary
253
8
1
1
3
253
8
1
1
3
Number of Jeep Compass services completed
2926+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

What Does It Mean When an Engine "Knocks"?
If your engine is making a knocking noise it means there's a problem. The wrong fuel octane, carbon buildup, and bad spark plugs can cause knocking.
Read more
How to Buy a Good Quality Brake Drum
The The introduction of disc brakes beginning in the 1970s eclipsed the older, more outdated technology of the drum brake. This style, however, is still used in some cars today, most often on the rear brakes and typically in order...
Read more
Cell Phones and Texting: Distracted Driving Laws in Alabama
According According to Drive Safe Alabama, distracted driving is anything that could take your attention away from the primary task of driving. These distractions include: Using a cell phone, including calling, talking and texting Eating or drinking Putting on makeup...
Read more

Car having electrical problems

Based on your description, I will assume that absolutely nothing powers on when you open the door, insert the key, or even turn the key to the On position. If this is the case, the vehicle's battery may have died....
Read more

just replaced wheel bearings on a 2011 ford focus due to a grinding sound. also rep!aced brake pads both pads and bearings on fron

Hi there: I've seen quite a few Ford Focus' have internal issues with CV joints and transmission components that cause a similar "grinding noise" as a wheel bearing or worn out brake pads. However, before you take your car to...
Read more

My vehicle vibrates when I hit about 50mph Also makes a wind noise when I accelerate really bad shaking

I would recommend having your tires inspected by a qualified professional to determine if any irregularities exist. It is possible that a slipped belt could be causing this issue in one or more of your tires. It is also possible...
Read more
  1. Home
  2. Estimates
  3. Jeep
  4. Compass
  5. Wheel Bearings Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com

Read FAQ
GET A QUOTE