Jaguar XJR Wheel Stud Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(24)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(24)

Wheel Stud Replacement Service

How much does a Wheel Stud Replacement cost?

On average, the cost for a Jaguar XJR Wheel Stud Replacement is $158 with $63 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Jaguar XJRV8-5.0L TurboService typeWheel Stud - Passenger Side Rear ReplacementEstimate$364.39Shop/Dealer Price$451.74 - $657.55
1997 Jaguar XJRL6-4.0L TurboService typeWheel Stud - Passenger Side Rear ReplacementEstimate$764.47Shop/Dealer Price$959.36 - $1380.59
1998 Jaguar XJRV8-4.0L TurboService typeWheel Stud - Driver Side Front ReplacementEstimate$220.49Shop/Dealer Price$276.91 - $389.82
2000 Jaguar XJRV8-4.0L TurboService typeWheel Stud - Passenger Side Rear ReplacementEstimate$310.39Shop/Dealer Price$389.23 - $569.52
1999 Jaguar XJRV8-4.0L TurboService typeWheel Stud - Passenger Side Rear ReplacementEstimate$310.39Shop/Dealer Price$389.32 - $569.69
1998 Jaguar XJRV8-4.0L TurboService typeWheel Stud - Driver Side Rear ReplacementEstimate$220.49Shop/Dealer Price$276.91 - $389.82
2014 Jaguar XJRV8-5.0L TurboService typeWheel Stud - Passenger Side Front ReplacementEstimate$349.39Shop/Dealer Price$436.44 - $642.02
2006 Jaguar XJRV8-4.2L TurboService typeWheel Stud - Driver Side Front ReplacementEstimate$409.38Shop/Dealer Price$512.75 - $730.56
Show example Jaguar XJR Wheel Stud Replacement prices

What are wheel studs and how do they work?

Wheel studs are high-strength, threaded steel fasteners that securely hold the wheel and tire assembly to the axle hub. Typically, there are 4 to 6 studs per wheel pressed or threaded into the wheel hub. The wheel and tire assembly is mounted on the hub centering ring and the studs protrude from the hub through the wheel mounting holes. Lug nuts are threaded onto the studs to securely hold the wheel to the hub.

When to consider replacing wheel studs:

  • Wheel is loose or wobbling. The wheel and tire assembly must be held evenly and securely to the wheel hub by the lug nuts attached to the studs. If the lug nuts are not tightened securely, it can cause the wheel to vibrate, loosen and wobble, which can damage or even break the wheel studs and lug nuts, potentially causing the wheel to separate from the vehicle.
  • Missing or broken studs, or damaged threads. If the stud is missing or broken, the lug nut attached to the stud will be missing and the wheel will hold securely. When the threads on the stud are worn, rusted away, or otherwise damaged, the lug nut may not achieve the required torque and could come loose while driving.
  • Stud turns in place when fastening lug nut. When the stud spins in the wheel hub while tightening, it should be replaced. During replacement, the mounting hole in the wheel hub should be inspected for damage.

How do mechanics replace wheel studs?

  • The car is raised and supported on steel jack stands.
  • The wheel and tire assembly, brake rotor, and caliper are removed.
  • On vehicles where there is sufficient access at the back of the wheel hub, a compact tool is used to press the defective stud out of the hub.
  • On vehicles where there is no access to use a compact stud remover, the wheel hub must be removed. When the hub must be pressed out of the steering knuckle, the wheel bearing is typically replaced in the process of removing the hub. Sometimes, the entire hub and bearing assembly with the studs included can be replaced.
  • The new stud or studs are pressed into position from the back of the hub, the brake caliper and rotor are reinstalled, and the wheel is placed onto the studs.
  • The wheel lug nuts are tightened to the factory specifications.

Is it safe to drive with wheel stud problems?

No, but you can temporarily drive a vehicle at low speeds and for short trips with one missing wheel stud. However, if more than two studs are broken, it is recommended to repair the car prior to further use. Having all wheel studs in place with evenly tightened lug nuts prevents distortion of the brake rotor. Over longer periods, missing studs can damage the brake rotor, the wheel, and the remaining studs. A car may vibrate when driving with missing wheel studs and can cause the other studs or lug nuts to loosen. This can lead to the wheel separating from your tire while driving.

When replacing wheel studs keep in mind:

  • Wheel studs are made of high-strength steel. If a stud has broken, it is typically due to previous overtightening. Lug nuts should be tightened using a calibrated torque wrench or a torque limiting device.
  • Published torque values assume that studs are dry, clean, and free of all lubricants. Oil, grease, anti-seize or any similar compound should not be applied to the threads of a wheel stud or lug nut.
  • Should a vehicle require removal of the wheel hub to add a new wheel stud, studs on the hub should be replaced. However, only defective studs need to be replaced if there is access from the back of the hub.
  • Lug nuts should be tightened in a star or crisscross pattern specified by the original equipment manufacturer in order to avoid warping of the brake rotor or drum as well as damaging the wheel.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jaguar mechanics

Real customer reviews from Jaguar owners like you.

Excellent Rating

(24)

Rating Summary
23
0
0
0
1
23
0
0
0
1

Whitney

39 years of experience
783 reviews
Whitney
39 years of experience
Jaguar XJR V8-4.0L Turbo - Coolant is leaking - Hayward, California
very professional,satisfield

Joseph

20 years of experience
649 reviews
Joseph
20 years of experience
Jaguar XJR V8-4.2L Turbo - Fuel Filter - Kaysville, Utah
Excellent work, knowledgeable, detailed explanations.

Theodore

16 years of experience
1604 reviews
Theodore
16 years of experience
Jaguar XJR V8-4.0L Turbo - Fuel Pump - Redmond, Washington
Super attitude, excellent job,5star allday

Gregory

31 years of experience
383 reviews
Gregory
31 years of experience
Jaguar XJR V8-4.2L Turbo - Oil Change - Littleton, Colorado
Gregory was great

Excellent Rating

(24)

Rating Summary
23
0
0
0
1
23
0
0
0
1
Number of Jaguar XJR services completed
264+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jaguar MECHANICS
400+
experts on our platform

Recent articles & questions

Why Does Motor Oil Viscosity Matter?
Motor oil viscosity determines how thick or thin the oil is. Multiviscosity oils make it unnecessary to change your oil for different seasons.
What's the Cheapest Way to Finance Buying a Car?
When When you finally make that big decision to buy a new car, there are many options you have to consider. Obviously, you have to consider what kind of car you want and what prices fit into your budget. Financing...
How Long Does a Rearview Mirror Last?
Your Your car is required by law in most states to have a minimum of two mirrors that allow you to see behind the car. It can be any combination of the two side view mirrors and the rearview mirror....

High-pitched sounds and shuddering at the stop light, dash lights on

The problem is in the traction control (https://www.yourmechanic.com/article/how-does-traction-control-work) system, which detected a fault and turned on the VSC and check engine light. You will need to have the system tested to see what codes were stored and then have them...

Temperature gauge goes to high when car is stopped

To begin, this isn't something an inspection would reveal unless the mechanic was specifically looking for it. Firstly, how high does the temperature gauge rise when you come to a stop? It is normal for this to occur, especially in...

What are the signs my Timing Chain needs to be replaced?

Hi there. The noise that you are hearing could be either the timing chain or the variable valve timing solenoids. If the sound is constant and rattles easy and does not bog down the engine, then the timing chain is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com