Jaguar XJ Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(67)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(67)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Jaguar XJ Front Crankshaft Seal Replacement is $758 with $72 for parts and $686 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Jaguar XJV6-3.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$1321.86Shop/Dealer Price$1426.23 - $1585.42
2011 Jaguar XJV8-5.0LService typeFront Crankshaft Seal ReplacementEstimate$1434.54Shop/Dealer Price$1550.64 - $1820.53
2010 Jaguar XJV8-5.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$859.21Shop/Dealer Price$917.95 - $1042.93
2015 Jaguar XJV6-3.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$1253.38Shop/Dealer Price$1324.64 - $1459.01
2011 Jaguar XJV8-5.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$1434.54Shop/Dealer Price$1579.09 - $1870.33
2016 Jaguar XJV8-5.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$1253.38Shop/Dealer Price$1327.32 - $1463.69
2015 Jaguar XJV8-5.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$1253.38Shop/Dealer Price$1324.95 - $1459.54
2017 Jaguar XJV6-3.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$1253.38Shop/Dealer Price$1303.47 - $1421.95
Show example Jaguar XJ Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jaguar mechanics

Real customer reviews from Jaguar owners like you.

Excellent Rating

(67)

Rating Summary
64
1
1
0
1
64
1
1
0
1

Dario

10 years of experience
58 reviews
Dario
10 years of experience
Jaguar XJ V8-5.0L - Oil/Fluid Leak - Riverdale, Georgia
Dario was ABSOLUTELY awesome he was prompt, courteous and took the time to explain my repair and what order of importance the other items should be fixed. Thanks will use you again

Mario

22 years of experience
9 reviews
Mario
22 years of experience
Jaguar XJ V8-5.0L Turbo - Car is not starting Inspection - Jamaica, New York
Excellent service

Blissel

5 years of experience
38 reviews
Blissel
5 years of experience
Jaguar XJ V8-5.0L Turbo - Car Battery Replacement - Miami, Florida
On time and provided service as stated. This is exactly what I expected Thanks

Anthony

34 years of experience
79 reviews
Anthony
34 years of experience
Jaguar XJ V8-5.0L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Riverdale, Georgia
Awesome repoir very knowledgeable

Excellent Rating

(67)

Rating Summary
64
1
1
0
1
64
1
1
0
1
Number of Jaguar XJ services completed
737+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jaguar MECHANICS
500+
experts on our platform

Recent articles & questions

How to Use Blind Spot Mirrors
For For most passenger cars and trucks, the blind spot mirror is not necessary if you’re able to correctly adjust your side view mirrors. However, many drivers do find it simpler to add these aftermarket accessories (and some larger vehicles...
P0626 OBD-II Trouble Code: Generator Field/F Terminal Circuit High
P0626 means there's a fault on the generator field circuit due to a faulty alternator, battery, wiring, or poor communication between control module.
How to Find the Keyless Code on a Ford Explorer or Mercury Mountaineer
Many Many Ford Explorers and Mercury Mountaineers were manufactured with an option known as the Ford keyless entry keypad. Some models refer to it as SecuriCode as well. It is a five-button numeric keypad that is used to: Eliminate fumbling...

Rear tire is loose.

You should not drive the vehicle since your car may be damaged and unsafe to drive. It sounds like the lower link arm or control arm (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-control-arm-assembly) has broken. I strongly suggest you have the vehicle inspected by a qualified...

Transmission warning

Hello. It sounds like you either have a bad connection at the battery or the issue is with the transmission position sensor. If the sensor fails then the computer will not allow the vehicle to start. The car is only...

I have a Code P0601 on the PCM. I replaced the PCM, and now I have a code P0118, code P0123, and code P0193.

Hi there, the short answer to your question is no . A PCM with a P0601 (https://www.yourmechanic.com/article/-p0601-obd-ii-trouble-code-internal-control-module-memory-check-sum-error-by-spencer-clayton) (which is a memory module error in the PCM) cannot reliably retrieve codes for the codes you list (P0118 (https://www.yourmechanic.com/article/p0118-obd-ii-trouble-code-engine-coolant-temperature-ect-sensor-circuit-high-open-problem-by-jay-safford) - coolant temp...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com