Isuzu Trooper Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(55)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(55)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Isuzu Trooper Wheel Bearings Replacement is $182 with $42 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Isuzu TrooperV6-3.2LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$318.86Shop/Dealer Price$345.85 - $414.67
1994 Isuzu TrooperV6-3.2LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$305.35Shop/Dealer Price$329.69 - $396.52
1990 Isuzu TrooperL4-2.6LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$331.95Shop/Dealer Price$380.30 - $521.16
2002 Isuzu TrooperV6-3.5LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$305.35Shop/Dealer Price$329.72 - $396.58
1998 Isuzu TrooperV6-3.5LService typeWheel Bearings - Driver Side Front ReplacementEstimate$305.35Shop/Dealer Price$331.93 - $400.45
2000 Isuzu TrooperV6-3.5LService typeWheel Bearings - Driver Side Front ReplacementEstimate$305.35Shop/Dealer Price$329.93 - $396.95
1990 Isuzu TrooperV6-2.8LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$331.95Shop/Dealer Price$380.31 - $521.19
2001 Isuzu TrooperV6-3.5LService typeWheel Bearings - Driver Side Front ReplacementEstimate$305.35Shop/Dealer Price$329.72 - $396.58
Show example Isuzu Trooper Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(55)

Rating Summary
52
0
0
1
2
52
0
0
1
2

Walter

43 years of experience
238 reviews
Walter
43 years of experience
Trooper 1989 - Car is hard to shift - Tulsa, OK
Very nice man! Did the job and then some.

Chris

15 years of experience
546 reviews
Chris
15 years of experience
Trooper 1991 - Distributor Rotor and Cap - Portland, OR
Had a previous mechanic diagnose the issue and he rescheduled me several times. Finally found Chris. He took a look at the issue and came up with a less expensive solution, turned out to be right fix. Chris was easy to talk with, informative and had my car running in a few hours at half the cost.

James

25 years of experience
835 reviews
James
25 years of experience
Trooper 1999 - ABS Light is on - Orlando, FL
James was a pleasure to interact with and very thorough. I will be using him again. Thanks for the great service and help!

David

5 years of experience
188 reviews
David
5 years of experience
Trooper 1999 - Oxygen Sensor - Orlando, FL
Very thorough, friendly, capable, and knowledgeable. I would most definitely recommend David to my friends, family, and co-workers.

Excellent Rating

(55)

Rating Summary
52
0
0
1
2
52
0
0
1
2
Number of Isuzu Trooper services completed
605+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

Is it Safe to Drive With a Hangover?
Being Being hungover is never fun. So many of us have experienced the headache, nausea, and the general feeling of regretting the prior night. You, in your drunken state, made a good choice not to drive last night, but now...
P0104 OBD-II Trouble Code: Mass Airflow (MAF) Electrical Circuit Erratic and Irregular Output
P0104 P0104 Trouble code definition Mass Airflow (MAF) Electrical Circuit Erratic and Irregular Output The Code P0104 code is often associated with a P0100, P0101, P0102 and P0103 codes. What the P0104 code means P0104 is the code for issues...
P2266 OBD-II Trouble Code: Low Voltage in Water in Fuel Sensor
P2266 P2266 code definition The P2266 code is set when low voltage is detected in the WIF (Water in Fuel) Sensor circuit at the Engine Control Module (ECM). Other fuel system codes may set along with P2266. What the P2266...

What does the loose fuel cap Warning Light mean?

The loose fuel cap Warning Light is located on the instrument panel. This light illuminates when the fuel cap is not properly secured. When you notice this light, secure the fuel cap as soon as is safely possible.

SUV hesitates when driving slowly and accelerating

If you have water in the gas, then you will have problems with the way it runs. I recommend having a fuel sample tested to see if you have water in the fuel. If you have an aftermarket air filter...

Does non-climate control car AC cut-in & cut-off automatically?

A/C systems that used fixed displacement compressors will cycle on and off (the compressor that is) depending on cooling demand. If you have a variable displacement compressor in your vehicle, though, the compressor may hardly ever cycle simply because the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com