Isuzu i-350 Emergency Brake Control Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(313)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(313)

Emergency Brake Control Replacement Service

How much does a Emergency Brake Control Replacement cost?

On average, the cost for a Isuzu i-350 Emergency Brake Control Replacement is $298 with $175 for parts and $123 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Isuzu i-350L5-3.5LService typeEmergency Brake Control ReplacementEstimate$499.19Shop/Dealer Price$599.61 - $871.64
Show example Isuzu i-350 Emergency Brake Control Replacement prices

What is the Emergency Brake Control all about?

Your vehicle is equipped with brakes on all four wheels to slow down and stop your vehicle while driving, and to hold your vehicle in position when you are engaged in gear. When your vehicle is equipped with an automatic transmission, a parking pawl is engaged when you put your shifter in park. But when you are parked on an incline, or if your vehicle is equipped with a manual transmission, what prevents your vehicle from rolling? Every vehicle is equipped with a parking brake, or emergency brake, that is manually applied for those circumstances.

An emergency brake pedal is pressed by foot and released by pressing a second time or pulling a release handle. A parking brake, or handbrake lever, is engaged by pulling up on it and released by pressing a button on the end of the lever and lowering the handle. In either situation, an emergency brake cable is attached to the mechanism and connects to the rear brakes. When the lever or pedal are engaged, the cable is pulled and the emergency brake shoes in the rear brakes are locked in place. The vehicle is not able to roll. If the emergency brake control lever or pedal will not hold in place, or will not engage the parking brake, it may require repairs.

Keep in mind:

  • The emergency brake, or parking brake, is designed for safety, not for the purpose of performing automotive stunts, slides, or drifts.
  • Driving with the emergency brake engaged can cause excessive wear or damage to your braking system.
  • A parking brake which needs adjustment can simulate issues of an inoperative emergency brake control.

How it's done:

  • The emergency brake control is verified it needs replaced
  • The defective emergency brake control is removed
  • The new emergency brake control is installed
  • The engine is started and the emergency brake control is checked
  • The vehicle is tested for proper operation of the emergency brake control.

Our recommendation:

The parking brake should be checked for proper operation at least once annually. If the parking brake lever will not engage, release, or has no tension when applied, your emergency brake control may need to be replaced by one of our expert technicians.

What common symptoms indicate you may need to replace the Emergency Brake Control?

  • The hand brake lever or emergency brake pedal will not return to the disengaged position.
  • The emergency brake pedal or lever will not engage.
  • There is no resistance in the emergency brake pedal or lever when engaged or released.

How important is this service?

The emergency brake is a feature that needs to operate when braking in a panic, parking on a steep incline with any kind of vehicle, or simply parking with a manual transmission vehicle. If your parking brake control does not function properly and cannot be adjusted, it needs to be replaced immediately as a matter of safety.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(313)

Rating Summary
290
13
0
2
8
290
13
0
2
8

Angelo

32 years of experience
76 reviews
Angelo
32 years of experience
Isuzu Trooper V6-3.5L - Check Engine Light is on - Plano, Texas
Angelo is very knowledgeable. Showed up on time. I am looking forward to working with him again

Jerimiah

19 years of experience
328 reviews
Jerimiah
19 years of experience
Isuzu Rodeo V6-3.2L - Pre-purchase Car Inspection - Las Vegas, Nevada
Jeremiah was very thorough. I am purchasing this vehicle from 4,000 miles away and really needed someone to look things over on my behalf. He called me and gave me info over the phone as well as sent me a full report. There were a few things not on his checklist that wanted to be checked out and he happily did that for me. I would recommend him for sure!

Alejandro

9 years of experience
82 reviews
Alejandro
9 years of experience
Isuzu Trooper V6-2.8L - Engine idle speed is high - Los Angeles, California
Very knowledgeable and easy to communicate with! Described all issues easily and pinpointed the exact problems I was having without me needing to mention it.

Simon

27 years of experience
309 reviews
Simon
27 years of experience
Isuzu Trooper V6-3.5L - Brake Pads Replacement (Front) - Clinton, Maryland
Very polite individual with outstanding mechanics skills!

Excellent Rating

(313)

Rating Summary
290
13
0
2
8
290
13
0
2
8
Number of Isuzu services completed
3443+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Power Steering Pump
If you hear squealing noises, the steering wheel feels stiff, or find damage on the power steering belt, have the power steering pump replaced.
New Mexico Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of New Mexico. Speed limits in New Mexico New Mexico has a wide range of speed limits along its...
P2296 OBD-II Trouble Code: Fuel Press Regulator 2 Control Circuit High
P2296 P2296 code definition Fuel Press Regulator 2 Control Circuit High What the P2296 code means P2296 is an OBD-II code for the engine control module (ECM) detecting the number 2 fuel pressure regulator control circuit is high indicating a...

Hard shifting, worse with lower gears

There should be no need for you to have to replace your transmission yet. You should get a full diagnostic check (https://www.yourmechanic.com/book/) from YourMechanic first before any part or component replacement. The problem you describe can be caused by a...

Catalytic converter replacement

Hello. It's quite possible that there is no one at fault here. It may just be unfortunate timing. I'm assuming that you have had the codes read (https://www.yourmechanic.com/article/how-to-read-and-understand-check-engine-light-codes-by-jason-unrau) and that is why you have decided you need to replace the...

Fuel gauge bounces around, usually when it is on full

More often than not, this issue is caused by a faulty fuel gauge sender (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fuel-gauge-sender). However, it can also be caused by issues with the EVAP canister or other EVAP components. The EVAP system is designed to filter out harmful...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com