Isuzu Ascender Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(32)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(32)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Isuzu Ascender Throttle Body Replacement is $457 with $317 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Isuzu AscenderV8-5.3LService typeThrottle Body ReplacementEstimate$866.02Shop/Dealer Price$1047.38 - $1583.34
2005 Isuzu AscenderV8-5.3LService typeThrottle Body ReplacementEstimate$808.85Shop/Dealer Price$976.40 - $1474.92
2004 Isuzu AscenderV8-5.3LService typeThrottle Body ReplacementEstimate$857.01Shop/Dealer Price$1036.62 - $1571.28
2003 Isuzu AscenderL6-4.2LService typeThrottle Body ReplacementEstimate$1279.81Shop/Dealer Price$1565.12 - $2416.88
2007 Isuzu AscenderL6-4.2LService typeThrottle Body ReplacementEstimate$1279.81Shop/Dealer Price$1566.60 - $2419.46
2008 Isuzu AscenderL6-4.2LService typeThrottle Body ReplacementEstimate$779.55Shop/Dealer Price$939.94 - $1416.61
2006 Isuzu AscenderV8-5.3LService typeThrottle Body ReplacementEstimate$813.29Shop/Dealer Price$981.99 - $1483.87
2004 Isuzu AscenderL6-4.2LService typeThrottle Body ReplacementEstimate$1279.81Shop/Dealer Price$1565.12 - $2416.88
Show example Isuzu Ascender Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(32)

Rating Summary
30
2
0
0
0
30
2
0
0
0

Ruben

36 years of experience
83 reviews
Ruben
36 years of experience
Isuzu Ascender L6-4.2L - Brake Pads Replacement (Front) - Seffner, Florida
I really appreciated everything he did. I had more wrong with my car then originally thought and he was able to order the part and come back the next day to get everything done. He really made me feel like I was a priority.

Gustavo

16 years of experience
103 reviews
Gustavo
16 years of experience
Isuzu Ascender L6-4.2L - Brake Pads Replacement (Front, Rear) - Bergenfield, New Jersey
Knowledgeable , Professional, and Trustworthy .

Scott

37 years of experience
995 reviews
Scott
37 years of experience
Isuzu Ascender L6-4.2L - Ignition Coil - Chandler, Arizona
Great dude. He was fast and efficient.

John

33 years of experience
1126 reviews
John
33 years of experience
Isuzu Ascender L6-4.2L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Alvin, Texas
Very good knows what he is doing

Excellent Rating

(32)

Rating Summary
30
2
0
0
0
30
2
0
0
0
Number of Isuzu Ascender services completed
352+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

What Is the Shelf Life of Motor Oil?
If you plan on storing your oil, it's good to know how long motor oil lasts. Store your motor oil in a cool, dark place to make your oil last longer.
A Buyer’s Guide to the 2012 Porsche Cayenne
If If you’re looking for an SUV that offers plenty of cargo space, the ability to tow more than 7,000 pounds and that has luxury and fun to drive appeal, the 2012 Porsche Cayenne is your answer. Key Features All...
How Long Does an AC Compressor Last?
As long as your car is running the way it should, you probably don’t even think about all the parts that are working...

Radio’s touchscreen died, what’s the problem?

Your touch screen system has a recall, R40 dated 7/28/2015, that pertains to the radio system being susceptible to a security vulnerability. The vulnerability could allow someone to access the system which could cause problems. The dealer will reprogram your...

engine light comes on after oil change service

Hi there: On modern vehicles, there are two different types of "warning lights"; routine service lights and trouble code warning lights. In most cases, when you have a routine service light that illuminates, it's set to do so at certain...

Car won't start I've put a new battery and have no volt drop from battery to cables

The voltage on the heavy cable at the starter should be equal to battery voltage unless you are cranking the engine at which time the voltage will momentarily drop. If you are not reading battery voltage on that cable, there...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com