Infiniti M35h Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Infiniti M35h Car Thermostat Replacement is $283 with $101 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Infiniti M35hV6-3.5L HybridService typeCar Thermostat ReplacementEstimate$402.70Shop/Dealer Price$461.19 - $618.23
2013 Infiniti M35hV6-3.5L HybridService typeCar Thermostat ReplacementEstimate$390.99Shop/Dealer Price$445.46 - $599.49
Show example Infiniti M35h Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Infiniti mechanics

Real customer reviews from Infiniti owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

John

11 years of experience
94 reviews
John
11 years of experience
Infiniti M35h V6-3.5L Hybrid - Brake Rotor/Disc Replacement (Rear) - Chula Vista, California
Great to work with and professional. On time or let me know when not. Experienced mechanic.

David

14 years of experience
463 reviews
David
14 years of experience
Infiniti M35h V6-3.5L Hybrid - Pre-purchase Car Inspection - Marietta, Georgia
David is an excellent mechanic, on time and saved me from making a really big mistake.

Jim

34 years of experience
225 reviews
Jim
34 years of experience
Infiniti M35h V6-3.5L Hybrid - Battery will not hold a charge - Livermore, California
On-time, friendly, knowledgeable, and thorough. I couldn't ask anything more. Thanks Jim!

Jonathan

36 years of experience
522 reviews
Jonathan
36 years of experience
Infiniti M35h V6-3.5L Hybrid - Oil Change - New Port Richey, Florida
On time, professional, good workmanship. Highly recommend

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Infiniti M35h services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Infiniti MECHANICS
1000+
experts on our platform

Recent articles & questions

P0057 OBD-II Trouble Code: HO2S Heater Control Circuit Low (Bank 2 Sensor 2)
P0057 P0057 trouble code definition P0057 is a code that sets when the powertrain control module senses that the voltage is low on the bank 2 sensor 2 oxygen sensor. What the P0057 code means When a P0057 trouble code...
Off-Road Driving Techniques for Beginners
When When you bought that Jeep or Land Cruiser you had two thoughts in mind. First, it would get you around town. Second, it could be your moveable man cave. You had every intention of being one of the 44...
What Happens If I Overinflate My Tires?
It is a common misconception that overinflating your tires will provide more responsive handling and greater fuel efficiency. In fact, over-inflation is...

Traction Control light on, crumbling at the front end

This vehicle has many technical bulletins that pertains to wiring issues with pins and connectors to various modules and control units (https://www.yourmechanic.com/article/what-is-a-vehicle-s-electrical-control-unit) in the vehicle. This issue is one that is hard to track down, since it is an intermittent...

I put it in reverse and it went forward. I then put it in drive and it went in reverse. Why would this happen?

Hi and thanks for contacting YourMechanic. Check the shifter cable (https://www.yourmechanic.com/services/shift-selector-cable-replacement) to the transmission and make sure that the cable is hooked up correctly. What seems to be happening is either the shifter cable is not attached to the transmission...

My Check Engine Light is on and my engine misfires

Hello there. Many common faults could cause your vehicle to have a cylinder #2 misfire. The most common faults are the spark plugs (https://www.yourmechanic.com/services/spark-plugs-replacement), spark plug wires (https://www.yourmechanic.com/services/ignition-cable-spark-plug-wires-replacement), coil (https://www.yourmechanic.com/services/ignition-coil-replacement), fuel injector (https://www.yourmechanic.com/services/fuel-injector-replacement), a vacuum leak, or low compression in...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com