Hyundai Veracruz Car Starter Repair at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(57)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(57)

Car Starter Repair Service

How much does a Car Starter Repair cost?

On average, the cost for a Hyundai Veracruz Car Starter Repair is $618 with $366 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Hyundai VeracruzV6-3.8LService typeCar Starter RepairEstimate$1064.24Shop/Dealer Price$1267.03 - $1860.82
2007 Hyundai VeracruzV6-3.8LService typeCar Starter RepairEstimate$1048.02Shop/Dealer Price$1247.63 - $1839.04
2010 Hyundai VeracruzV6-3.8LService typeCar Starter RepairEstimate$1219.24Shop/Dealer Price$1461.70 - $2181.56
2008 Hyundai VeracruzV6-3.8LService typeCar Starter RepairEstimate$1048.02Shop/Dealer Price$1247.68 - $1839.11
2011 Hyundai VeracruzV6-3.8LService typeCar Starter RepairEstimate$1219.24Shop/Dealer Price$1464.35 - $2186.20
2012 Hyundai VeracruzV6-3.8LService typeCar Starter RepairEstimate$994.72Shop/Dealer Price$1181.30 - $1732.96
Show example Hyundai Veracruz Car Starter Repair prices

What's a car starter motor and how does it work?

The starter motor is a powerful, compact electric motor that will turn a car’s engine over at about 200 RPM in order to start the engine. The starter is at the terminus of a circuit that includes the battery, the ignition switch, a neutral safety switch, relays and fuses.

When you turn the ignition key to start, or press the start button in some vehicles, the starter circuit is completed and the starter will run. Most starters have a small pinion gear that engages a larger ring gear on the flywheel when the starter is powered on. The pinion gear turns the engine flywheel at about 200 RPM. Since the flywheel is directly connected to the crankshaft, all engine components will then turn in sync and the engine starts.

Starter

When to replace the starter?

Starters are relatively durable but most will eventually fail in one or more of the following ways:

  • Intermittent operation of the starter. Starters can develop bad spots on the armature which will cause intermittent operation. This causes the starter to work sometimes and other times when you turn the key nothing happens.
  • Starter turns too slowly. Internal electrical and mechanical faults can cause the starter to draw too much current and in some cases the current drawn will exceed what the battery can supply. A consequence is the engine may not start as rapidly.
  • Unusual noises on starting. If you hear any type of grinding or other unusual noise while starting the engine, that should be investigated as the noise could reflect an internal starter failure or the noise could be due to pinion gear failure or flywheel ring gear damage.
  • Starter doesn’t function when turning the key. In some cases, the first symptom of a starter malfunction is a complete failure of the starter motor. This happens when you turn the ignition key to start the car, the starter motor does not function at all.

How do mechanics repair the starter?

  • If the starter is determined to be faulty, the battery must be disconnected prior to commencing any work. Once the battery is disconnected, the wiring to the starter is disconnected.
  • Starters are bolted to the engine block or the transmission case. Generally, there are two bolts. The procedure to access the starter varies across car models and can require removal, or lowering, of other vehicle components.
  • Once the starter is removed and a new starter is installed, the mounting bolts are tightened to the OEM factory torque specifications, the electrical connections are cleaned and re-attached to the starter and the starter is tested to confirm normal operation.

Is it safe to drive with a starter problem?

Once a vehicle engine is running, the starter is not in use. However, if you know that the starter is malfunctioning or working intermittently, you may be left stranded if you turn the engine off and the starter doesn’t function when restarting the engine. Should you know or suspect a problem with the starter, it is best to have the problem repaired to avoid being left stranded.

When replacing a faulty starter keep in mind:

  • Prior to replacing the starter, simple diagnostic tests should be performed to ensure that the problem is a faulty starter versus a weak battery, faulty neutral start switch, or other faulty electrical component in the starter motor circuit.
  • Starters draw large amounts of current from the battery, much more than any other electrically powered device in your car. This makes it important that the electrical connections to the battery are inspected, cleaned, and tightened as necessary. Cables to the starter should also be inspected for corrosion and replaced as needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(57)

Rating Summary
56
1
0
0
0
56
1
0
0
0

Alexander

7 years of experience
126 reviews
Alexander
7 years of experience
Hyundai Veracruz V6-3.8L - Alternator - Columbus, Ohio
Super friendly and helpful. Would highly recommend .

Terry

31 years of experience
223 reviews
Terry
31 years of experience
Hyundai Veracruz V6-3.8L - Power Steering Pump - Scottsdale, Arizona
Terry was very polite and friendly. He replaced our power steering pump in about an hour and a half. Very please with 6he work

Randy

23 years of experience
138 reviews
Randy
23 years of experience
Hyundai Veracruz V6-3.8L - Axle / CV Shaft Assembly Replacement (Driver Side Front, Passenger Side Front) - Punta Gorda, Florida
On time, proper tools and knew what he was doing. Job well done!

Scott

37 years of experience
995 reviews
Scott
37 years of experience
Hyundai Veracruz V6-3.8L - Axle / CV Shaft Assembly Replacement (Driver Side Front) - Gilbert, Arizona
Scott arrived on time and fixed only what needed to be fixed. Some other mechanic wanted to replace something that didn't need to be replaced according to Scott so Scott saved me quite a bit of money by being honest and only fixing what needed fixing. He had everything he needed to fix what I asked for when I set up the appointment. Very convenient that I can sit in my home while the mechanic works out of my garage!

Excellent Rating

(57)

Rating Summary
56
1
0
0
0
56
1
0
0
0
Number of Hyundai Veracruz services completed
627+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

How to Prepare for the Wyoming Driver’s Written Test
If If you want to drive in Wyoming, one of the first things you need to do is to make sure you pass the driver’s written test. You need to pass this test before you can get your learner’s permit,...
How Cars Get Safety Tested (How IIHS Safety Works)
The Insurance Institute for Highway Safety (IIHS) provides car safety ratings on front crash, side crash, head restraints, and roof strength.
Cell Phones and Texting: Distracted Driving Laws in Florida
Florida Florida defines distracted driving as anything that takes your mind off the road, hands off the wheel, or your eyes away from the road. Since 2012, distracted driving crashes have increased by 25 percent. Distractions Texting Reaching for a...

Rough idle when engine is hot after 10 minutes of sitting

Based on the information you provided, It sounds like you may have sticking or leaking fuel injector (https://www.yourmechanic.com/services/fuel-injector-replacement). I suggest having the car looked at by a certified technician, like one from YourMechanic, who can diagnose your rough running symptoms...

My car is jerking. When I plug in the idling sensor, especially after driving a few kilimeters and when I unplug it, the car travels well

Hi - it is quite possible your engine is running in "open loop" when the idle sensor is disconnected, simply because the engine computer realizes that a crucial sensor is missing. By design, open loop running will be a richer...

Start issue

The maintenance reminder light generally refers to the need to change the engine oil and filter. That would not be relevant to the present no start. If the check engine light is on, or even if it is off, there...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com