Hyundai Veracruz Car door is sagging Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(52)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(52)

Car door is sagging Inspection Service

How much does a Car door is sagging Inspection cost?

On average, the cost for a Hyundai Veracruz Car door is sagging Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Hyundai VeracruzV6-3.8LService typeCar door is sagging InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2007 Hyundai VeracruzV6-3.8LService typeCar door is sagging InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2012 Hyundai VeracruzV6-3.8LService typeCar door is sagging InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2011 Hyundai VeracruzV6-3.8LService typeCar door is sagging InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2010 Hyundai VeracruzV6-3.8LService typeCar door is sagging InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2008 Hyundai VeracruzV6-3.8LService typeCar door is sagging InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Hyundai Veracruz Car door is sagging Inspection prices

A sagging car door can be incredibly frustrating. It may seem like a relatively insignificant problem, but in reality it can be a real inconvenience. Your door looks odd when opened and you're scared that it may fall off. It's a hassle to try and close a sagging door because it won't latch properly unless you're lifting the door to fit it in just right.

How this system works:

A car door operates the same way that a house door does. It relies on a hinge that connects the door to the body of your car. When you pull on your door handle, the pin in the middle of the car door hinge rotates, the hinge unfolds like a book that is opening, and the car door opens easily. When the hinges are functioning properly, they not only allow you to open and close the car door with ease, but they hold the door open without letting it sag.

Common reasons for this to happen:

Two primary issues can cause a car door to sag:

  • Hinge pin and bushings are worn: The hinge pin and bushings are what allow the hinges to open up. The pin is the long cylinder in the middle of the hinge, and the bushings are on the top and bottom of the pin. These pieces rotate as you open and close the door. Over time, the pin and bushings can wear out. When this happens, they become loose within the hinge, and are no longer able to hold as sturdy as they once did, resulting in the car door sagging.

  • Damaged or loose door hinge: The hinge that allows the door to swing open and closed is attached to both the door and the car frame. The hinge is attached with large bolts. Like all bolts, these can become loose from time to time, which causes the hinge to become loose. When the hinge is loose, the weight of the door is too much for the hinge, and the door will sag. Even if the bolts are tight, the hinge itself can become bent or damaged in a way that prohibits it from holding the door as firmly as it should.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the cause of the sagging car door and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The door hinge is a relatively easy part of your vehicle for a mechanic to inspect. The mechanic will check out the hinge and see what part is damaged or loose. The mechanic will then either replace the part in question, or replace the entire hinge assembly. They’ll also check to make sure that no damage has been done to the door or the frame.

How important is this service?

A sagging car door is a nuisance. And it's a problem that will only get worse if you neglect it. It will sag more and more until it's impossible to close the door. Therefore, you should schedule an inspection sooner rather than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(52)

Rating Summary
51
1
0
0
0
51
1
0
0
0

Willie

24 years of experience
116 reviews
Willie
24 years of experience
Hyundai Veracruz V6-3.8L - Valve Cover Gasket - Hacienda Heights, California
Very professional. Happy to have him working on my car

Scott

36 years of experience
902 reviews
Scott
36 years of experience
Hyundai Veracruz V6-3.8L - Headlight Bulb Replacement (Driver Side Low Beam, Passenger Side Low Beam) - Phoenix, Arizona
Scott was very timely and got the job done well.

Eugenio

26 years of experience
133 reviews
Eugenio
26 years of experience
Hyundai Veracruz V6-3.8L - Brake Pads Replacement (Front) - Fairfax, Virginia
Eugenio was very friendly and professional. He took the time to explain everything he was doing. I would recommend him to anyone.

Alexander

6 years of experience
126 reviews
Alexander
6 years of experience
Hyundai Veracruz V6-3.8L - Alternator - Columbus, Ohio
Super friendly and helpful. Would highly recommend .

Excellent Rating

(52)

Rating Summary
51
1
0
0
0
51
1
0
0
0
Number of Hyundai Veracruz services completed
572+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

P2616 OBD-II Trouble Code: Camshaft Pos Signal Output Circuit High
P2616 means the camshaft position sensor has released a high output signal due to a faulty, broken or shorted wiring, or fluid contamination.
P0529 OBD-II Trouble Code: Fan Speed Sensor Circuit Intermittent
P0529 means the cooling fan sent an incorrect voltage signal, caused by open/shorted/corroded wiring, or a damaged fan motor/relay/speed sensor.
10 Car Maintenance Myths that are Actually False
Every Every car owner hears about best practices for keeping his or her vehicle in good shape. Whether the advice comes from friends, family, or the car manufacturer, many maintenance suggestions for fuel efficiency, engine power, and overall vehicle longevity...

Car makes a chugging noise when trying to start it

The most common causes of vehicles not starting is battery failure. With the door panel coming loose, it is generally due to the clips being broken or that the panel was removed and reinstalled improperly. A qualified technician, like one...

Transmission only has 1st gear

Hello. P0732 (https://www.yourmechanic.com/article/p0732-obd-ii-trouble-code-p0732-gear-2-incorrect-ratio-by-valerie-johnston) is the trouble code for an abnormal gear 2 shift ratio. If the vehicle's transmission computer detects that there is an issue with the gear ratio and timing of second gear, it will set off this code...

I replaced my engine of w221 s350 with this engine 272 946 31142350 they told me its for glk 350 2011 model how can I tell if thi

Hi there. Your best bet is to contact Mercedes-Benz dealership and speak with their service or parts department to get the information you're seeking. We offer general automotive tips and maintenance / service recommendations for our site visitors. Thanks.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com