Hyundai Scoupe Car Battery Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Hyundai Scoupe Car Battery Replacement is $324 with $184 for parts and $140 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
1994 Hyundai ScoupeL4-1.5L	Service typeCar Battery Replacement	Estimate$522.16	Shop/Dealer Price$617.55 - $895.62
1995 Hyundai ScoupeL4-1.5L	Service typeCar Battery Replacement	Estimate$513.15	Shop/Dealer Price$606.77 - $883.52
1994 Hyundai ScoupeL4-1.5L Turbo	Service typeCar Battery Replacement	Estimate$513.15	Shop/Dealer Price$606.80 - $883.56
1991 Hyundai ScoupeL4-1.5L	Service typeCar Battery Replacement	Estimate$513.15	Shop/Dealer Price$606.80 - $883.56
1993 Hyundai ScoupeL4-1.5L	Service typeCar Battery Replacement	Estimate$513.15	Shop/Dealer Price$608.27 - $886.14
1995 Hyundai ScoupeL4-1.5L Turbo	Service typeCar Battery Replacement	Estimate$513.15	Shop/Dealer Price$606.94 - $883.81
1993 Hyundai ScoupeL4-1.5L Turbo	Service typeCar Battery Replacement	Estimate$513.15	Shop/Dealer Price$606.81 - $883.59
1992 Hyundai ScoupeL4-1.5L	Service typeCar Battery Replacement	Estimate$513.15	Shop/Dealer Price$606.80 - $883.56

Show example Hyundai Scoupe Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(407)

Rating Summary

397

6

1

1

2

397

6

1

1

2

SEE REVIEWS NEAR ME

Luis

5 years of experience

302 reviews

Luis

5 years of experience

by Gregory

Hyundai Sonata L4-2.4L - Car Battery Replacement - Richmond, Virginia

Tested battery to confirm it was dead. Removed and reinstalled all associated brackets and connected parts. Replaced battery and tested again. Plus coming to me, offering suggestions for future services, and inspected breaks, wipers, etc! 10 out of 10 would recommend!

Rusty

24 years of experience

567 reviews

Rusty

24 years of experience

by Robert

Hyundai Tiburon V6-2.7L - Battery - Arlington, Texas

Second time I have used him ..Always on time and very friendly..I will use him on all my cars in the family!

Michael

7 years of experience

142 reviews

Request Michael

Michael

7 years of experience

Request Michael

by Jane

Hyundai Elantra L4-2.0L - Battery - Seattle, Washington

Michael was wonderful

Lavell

29 years of experience

405 reviews

Lavell

29 years of experience

by Alison

Hyundai Elantra L4-2.0L - Battery - Alameda, California

LaVell got my battery changed out quickly and without issues! Would definitely recommend his services.

Excellent Rating

(407)

Rating Summary

397

6

1

1

2

397

6

1

1

2

SEE REVIEWS NEAR ME

Recent articles & questions

How Much Does a Mechanic Make in Mississippi?

Automotive technician jobs in Mississippi have an average mechanic salary of $35k, which is near the national average.

Symptoms of a Bad or Failing Shock Absorber

Common signs include vibrations while driving, swerving or nose diving when braking, longer stopping time, uneven tire wear, and leaking fluid.

How to Get Smog Technician Certified in Washington

Automotive technician jobs include smog certified emissions inspectors. In Washington, you need to work at an authorized testing station.

Engine shudder while driving, burnt rubber smell

Hello. Most of the time, this is the first indication that the timing belt is failing (https://www.yourmechanic.com/services/timing-belt-replacement). The timing belt needs to be checked to see if it is going bad. If the belt is fine, then you may have...

Shakes at 60+

Bad inner constant-velocity (C/V) joints can give you vibrations while accelerating. When they are worn, they can vibrate under load (accelerating). Tire balancing could cause vibration while accelerating, maintaining speed, and coasting, and is less likely to be the issue....

What if the VSA turns on during startup and doesn't turn off and what I do is I turn off the engine and start again. This time aro

Hi there. If the VSA light is coming on and shutting off but does not come back on until the next start, then this is a normal condition as the light is telling the drive that the VSA system is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com