Hyundai Santa Fe Serpentine/Drive Belt Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(22)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(22)

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a Hyundai Santa Fe Serpentine/Drive Belt Replacement is $179 with $39 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Hyundai Santa FeV6-2.7LService typeSerpentine/Drive Belt ReplacementEstimate$255.58Shop/Dealer Price$284.33 - $362.46
2012 Hyundai Santa FeV6-3.5LService typeSerpentine/Drive Belt ReplacementEstimate$243.67Shop/Dealer Price$269.92 - $344.56
2017 Hyundai Santa FeV6-3.3LService typeSerpentine/Drive Belt ReplacementEstimate$224.63Shop/Dealer Price$246.15 - $306.52
2020 Hyundai Santa FeL4-2.4LService typeSerpentine/Drive Belt ReplacementEstimate$261.57Shop/Dealer Price$292.32 - $380.40
2005 Hyundai Santa FeV6-3.5LService typeSerpentine/Drive Belt ReplacementEstimate$282.33Shop/Dealer Price$319.75 - $424.50
2010 Hyundai Santa FeV6-3.5LService typeSerpentine/Drive Belt ReplacementEstimate$243.67Shop/Dealer Price$270.09 - $344.85
2013 Hyundai Santa FeV6-3.3LService typeSerpentine/Drive Belt ReplacementEstimate$224.63Shop/Dealer Price$246.16 - $306.55
2005 Hyundai Santa FeL4-2.4LService typeSerpentine/Drive Belt ReplacementEstimate$257.89Shop/Dealer Price$287.72 - $373.04
Show example Hyundai Santa Fe Serpentine/Drive Belt Replacement prices

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

Belts

When to consider replacing the serpentine belt:

  • Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
  • Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
  • Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
  • Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

  • Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
  • The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
  • All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
  • If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

  • On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
  • Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
  • Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(22)

Rating Summary
20
0
0
1
1
20
0
0
1
1

Scott

30 years of experience
531 reviews
Scott
30 years of experience
Santa Fe 2004 - Serpentine/Drive Belt - Denver, CO
Very convient and professional

Salvador

19 years of experience
14 reviews
Salvador
19 years of experience
Santa Fe 2007 - Fuel door won't close - Hagerstown, MD
Very friendly, honest and knowledgeable

Kevin

7 years of experience
27 reviews
Kevin
7 years of experience
Santa Fe 2007 - Fuel Pump - Kissimmee, FL
Wonderful service! Will use again!

Francisco

10 years of experience
45 reviews
Francisco
10 years of experience
Santa Fe 2011 - Adjust Parking Brake Cable - Cedar Park, TX
Quickly fixed issue. Very prompt and knowledgeable. Will use again.

Excellent Rating

(22)

Rating Summary
20
0
0
1
1
20
0
0
1
1
Number of Hyundai Santa Fe Serpentine/Drive Belt Replacement services completed
242+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

How to Obtain a G1 ASE Study Guide and Practice Test
Automotive technician jobs pay more if you’re ASE certified. Get the study guide and practice test to be a G1 Maintenance and Light Repair Technician.
How Long Do Spring Insulators Last?
Most Most cars use a shock/strut suspension system with coiled springs to provide comfort and improve handling on the road. It’s reliable, lasts a relatively long time, and performs pretty well. It also doesn’t have some of the problems found...
How to Clean an EGR Valve
The The EGR valve is the heart of the emissions system on an engine. EGR is an acronym for Exhaust Gas Recirculation, and that is exactly what it does. This wonderful environmentally-friendly device opens up during certain engine conditions and...

Windshield wipers wont turn on

Hi there. There are many reasons why windshield wipers may not work, ranging from a fuse or electrical relay being blown that powers the wiper module - which relays power from the switch to the motor. You might want to...

My my 01 pt cruiser died while in reverse backing up what could cause this?

There may be a couple different causes and would first need to see if problem was caused by the transmission or the engine. Have the transmission and engine scanned for stored codes to see if there is an internal transmission...

We aren’t really sure. From what we read it was the wheel sped sensors. We replaced all 4 with OEM sensors. It didn’t fix the problem. Hill start assist,\*\*\*\*\*and traction control all shut off when in less than 50 feet and no speedometer

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com