Hyundai Santa Cruz Loud noises when car is put in gear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(7,353)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(7,353)

Loud noises when car is put in gear Inspection Service

How much does a Loud noises when car is put in gear Inspection cost?

On average, the cost for a Hyundai Santa Cruz Loud noises when car is put in gear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2022 Hyundai Santa CruzL4-2.5L TurboService typeLoud noises when car is put in gear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2022 Hyundai Santa CruzL4-2.5LService typeLoud noises when car is put in gear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Hyundai Santa Cruz Loud noises when car is put in gear Inspection prices

When you put your car in gear, there should be minimal noise. The transmission should engage easily, and you should be able to drive without any effort. If you’re hearing loud noises when the car is put in gear, it could be one of several different problems depending on the type of noise in question and when exactly you’re hearing it. It may not even be related to the transmission.

How this system works:

When you put your car in gear, it puts a load on both the engine and the transmission. When you press the gas, that load changes. For this reason, engines and transmissions have mounts. These mounts cushion, support and secure both the engine and transmission, ensuring that the loading doesn’t translate into loud clunks, thunks, bangs and other abnormal sounds.

In addition, a number of things must happen when you put your car in gear (these will vary drastically depending on whether you’re driving a car with a manual or an automatic transmission). For instance, with a manual transmission, you must press in the clutch pedal, which engages the clutch and allows you to shift gears. If the clutch is worn, you may hear a grinding or screeching sound here.

In an automatic transmission, things work a little differently. There are clutch plates throughout, as well as bands that connect each gear. If either the clutch plates or the bands have suffered wear, it’s possible you’ll hear noises when the transmission changes gears.

Common reasons for this to happen:

  • Low Transmission Fluid: The most common reason for any transmission-related problem is low fluid. Your transmission requires the right amount of fluid to operate, and to protect internal components from wear and tear, heat and friction.

  • Failed Motor Mount: Another common cause of hearing a noise when putting your car into gear is a failed motor mount. Different makes and models use different types of mounts. Some are little more than rubber blocks, while others are hydraulic units. In either instance, a failed mount (or a missing motor mount bolt) will create a very loud noise when you put your car in gear.

  • Failing U-Joint: If you have a rear-wheel drive vehicle, the problem might not be with the engine or transmission, but with the drive shaft. A bad U-joint can cause a very loud sound when putting the car into gear. Play in the joint allows the shaft to flex incorrectly, causing noises and vibrations.

  • Worn Clutch: If you have a manual transmission, it’s possible that the clutch is worn out. This would make a screeching/grinding noise when attempting to put the car in gear.

  • Failing Pilot Bearing: This problem is only pertinent to manual transmissions, and only when engaging the clutch (pressing the clutch pedal in).

  • Failing Throw Out Bearing: If you hear a noise from your manual transmission when releasing the clutch, it could be a failed throw out bearing.

What to expect:

A professional mobile mechanic will visit your home or office to inspect the noise your car is making when putting it into gear. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to crank the car, and then put it in gear to verify and duplicate the noise. Based on this test, the mechanic will either have a diagnosis, or will need to inspect other components of the vehicle to verify their condition and operation. The actual steps taken will depend on the type of noise you’re hearing.

How important is this service?

Unusual noises when putting your car in gear should always be cause for alarm. It might be something relatively simple like a failed U-joint, but it might be a sign of transmission damage, or a failed motor mount, both of which are serious problems. One of our professional mechanics can diagnose and repair the problem for you.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(7,353)

Rating Summary
6,968
223
43
31
88
6,968
223
43
31
88

David

25 years of experience
180 reviews
David
25 years of experience
Hyundai Santa Fe L4-2.4L - Loud noises when car is put in gear - Ocala, Florida
I have had David service my car several times now & would highly recommend him to anyone who is in need of an honest & reliable mechanic. He is extremely through & patient, explaining everything that is needed to repair or keep your vehicle's maintenance up to date & I can't thank him enough for all he's done to keep my car in the best driving condition possible

John

20 years of experience
590 reviews
John
20 years of experience
Hyundai Elantra L4-2.0L - Windshield Washer Pump Replacement (Front) - Apopka, Florida
Was great !!

Andrew

17 years of experience
70 reviews
Andrew
17 years of experience
Hyundai Elantra L4-2.0L - Wheel Stud Replacement (Driver Side Front) - San Antonio, Texas
He was on time courteous and knowledgeable

James

30 years of experience
925 reviews
James
30 years of experience
Hyundai Tucson L4-2.0L - Brake Caliper Replacement (Passenger Side Front) - Orlando, Florida
Very helpful, takes the time to answer questions.

Excellent Rating

(7,353)

Rating Summary
6,968
223
43
31
88
6,968
223
43
31
88
Number of Hyundai services completed
80883+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Volvo XC70
This This crossover station wagon not only carries its own weight in cargo space and all-terrain ability alone, but it also offers a nostalgic twist with its boxy exterior reminiscent of good ole’ Volvo wagons past. The XC70 is the...
3 Essential Things to Know About Your Car’s Temperature Gauge
A car temperature gauge shows how hot the engine is. If the temperature gauge reads high, your car could be leaking coolant or have a bad water pump.
How to Buy a Personalized License Plate in Maryland
Maryland Maryland offers a variety of different styles of personalized license plates (https://www.yourmechanic.com/article/how-to-find-out-which-license-plates-are-available-in-your-state-by-brady-klopfer) (also known as vanity plates), from personalized car tags to plates that are affiliated with organizations such as universities/colleges, nonprofits, and charities. If you are eligible for...

When driving over puddle, water intrusion caused car to shut off

Hi there. If the engine sucked enough water into it to cause a rod to fail and go through the block then the engine will need to be replaced. As for he rest of the power train it will be...

what is the function of this LOCK PLATE , COLLAR NUT, BEARING RACE, SHIM X, output FLANGE?

The output flange is to connect the driveshaft or axle depending on the type of rear end you have. The lock plate holds in the bearing using a shim to pre-load the bearing into the race. The collar nut holds...

Car shakes and makes thumping sounds while moving

The engine and transmission mounts should be checked on account of your mention of shaking on acceleration. Thumping sounds are often related to defective tires. If your tires are old and worn irregularly, that would be a suspect. If you...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com