Honda Odyssey Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(48)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(48)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Honda Odyssey Power Steering Pressure Hose Replacement is $302 with $162 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Honda OdysseyL4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$578.02Shop/Dealer Price$687.38 - $1007.34
1999 Honda OdysseyV6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$638.27Shop/Dealer Price$752.77 - $1090.92
1997 Honda OdysseyL4-2.2LService typePower Steering Pressure Hose ReplacementEstimate$470.45Shop/Dealer Price$553.42 - $798.16
2001 Honda OdysseyV6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$638.27Shop/Dealer Price$752.80 - $1090.97
2011 Honda OdysseyV6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$764.41Shop/Dealer Price$922.35 - $1388.66
1995 Honda OdysseyL4-2.2LService typePower Steering Pressure Hose ReplacementEstimate$470.45Shop/Dealer Price$553.56 - $798.41
2003 Honda OdysseyV6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$638.27Shop/Dealer Price$752.82 - $1091.01
2018 Honda OdysseyV6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$673.17Shop/Dealer Price$806.82 - $1203.60
Show example Honda Odyssey Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Honda mechanics

Real customer reviews from Honda owners like you.

Excellent Rating

(48)

Rating Summary
42
4
0
0
2
42
4
0
0
2

Dan

32 years of experience
1001 reviews
Dan
32 years of experience
Odyssey 2007 - Power Steering Pressure Hose - Hoschton, GA
Showed up on time and had to do some of the work getting wet. Knowledgable and professional. We were pleased with the work he did.

Andrew

0 years of experience
351 reviews
Andrew
0 years of experience
Odyssey 2010 - Power Steering Pressure Hose - Elkridge, MD
Awsome

Theodore

10 years of experience
1656 reviews
Theodore
10 years of experience
Odyssey 2007 - Power Steering Pressure Hose - Renton, WA
Excellent job. Very efficient. Managed work space well. Very clean. I plan to hire Theodore for all my future automotive repairs that require a highly skilled and experienced mechanic.

Rusty

0 years of experience
532 reviews
Rusty
0 years of experience
Odyssey 2008 - Power Steering Pressure Hose - Kennedale, TX
Well done, professional work. Excellent results.

Excellent Rating

(48)

Rating Summary
42
4
0
0
2
42
4
0
0
2
Number of Honda Odyssey Power Steering Pressure Hose Replacement services completed
528+
services done by our mechanics
TOTAL NUMBER OF EXPERT Honda MECHANICS
1700+
experts on our platform

Recent articles & questions

What Does It Mean When an Engine "Knocks"?
If your engine is making a knocking noise it means there's a problem. The wrong fuel octane, carbon buildup, and bad spark plugs can cause knocking.
B1903 OBD-II Trouble Code: Air Bag Crash Sensor #1 Ground Circuit Short to Battery
B1903 means there is a problem with the ground circuit for the air bag crash sensor #1, likely due to damaged electrical components or a bad sensor.
Understanding Hyundai Service Required Lights
Car symbols, or dashboard lights, are a car service reminder. The Hyundai Service Required light indicates when your car needs service.

Accidentally put diesel in a gasoline engine.

We recommend a full drain for any amount of contamination, but if you have put in 2 litres or less of diesel in a petrol car (less than 5% of a full tank) and then fill up your remaining tank...

Where is the fuel rail pressure sensor located on a 2012 chevy impala ltz 3.6 liter v6

There are two fuel system pressure sensors in your application: one on the fuel rail and the other on the fuel feed pipe forward of the fuel tank. The fuel rail pressure sensor detects fuel pressure within the fuel rail....

Car stalls when engine in reverse, drive or turning steering wheel all the way

This may be a sign of a faulty MAP sensor as the vehicle responds adversely to a load put on the motor (i.e. putting it in gear, making turns (which makes use of the power steering pressure switch) turning on...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com