Honda Civic del Sol Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(32)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(32)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Honda Civic del Sol Power Steering Pressure Hose Replacement is $428 with $288 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Honda Civic del SolL4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$901.48Shop/Dealer Price$1053.04 - $1490.69
1994 Honda Civic del SolL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$882.56Shop/Dealer Price$1030.40 - $1465.28
1994 Honda Civic del SolL4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$882.56Shop/Dealer Price$1030.46 - $1465.37
1995 Honda Civic del SolL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$882.56Shop/Dealer Price$1030.45 - $1465.37
1997 Honda Civic del SolL4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$882.56Shop/Dealer Price$1033.55 - $1470.78
1995 Honda Civic del SolL4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$882.56Shop/Dealer Price$1030.75 - $1465.88
1993 Honda Civic del SolL4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$721.97Shop/Dealer Price$867.84 - $1301.23
1993 Honda Civic del SolL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$721.97Shop/Dealer Price$867.82 - $1301.20
Show example Honda Civic del Sol Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Honda mechanics

Real customer reviews from Honda owners like you.

Excellent Rating

(32)

Rating Summary
32
0
0
0
0
32
0
0
0
0

Rohon

49 years of experience
147 reviews
Rohon
49 years of experience
Honda Civic del Sol L4-1.6L - Trunk does not lock or open - Valley Stream, New York
very knowledgeable. Very courteous and prompt. Takes pride in his work. looking forward to doing business with him again. Thank you again Rohon.

Patrick

33 years of experience
369 reviews
Patrick
33 years of experience
Honda Civic del Sol L4-1.6L - Car is not starting - Las Vegas, Nevada
Kept me aware of everything he was doing, was on time, and thorough

David

29 years of experience
142 reviews
David
29 years of experience
Honda Civic del Sol L4-1.5L - Radiator - National City, California
He's one of the best

Steve

38 years of experience
149 reviews
Steve
38 years of experience
Honda Civic del Sol L4-1.6L - Oil Change - Hayward, California
Steve arrived on time and was amicable. He finished the oil change and tire rotation in a timely manner. When he was finished he went over everything with me and even showed me problems I did not know existed. He actually saved me from an accident waiting to happen. I'd definitely recommend him.

Excellent Rating

(32)

Rating Summary
32
0
0
0
0
32
0
0
0
0
Number of Honda Civic del Sol services completed
352+
services done by our mechanics
TOTAL NUMBER OF EXPERT Honda MECHANICS
1700+
experts on our platform

Recent articles & questions

Kansas Parking Laws: Understanding the Basics
Kansas Kansas drivers are responsible for parking properly and abiding by the laws. They also need to ensure that their vehicle does not become a hazard when it is parked. There are a number of laws in the state that...
P0407 OBD-II Trouble Code: Exhaust Gas Recirculation Sensor B Circuit Low
P0407 means a problem with the EGR system caused by faulty EGR vacuum solenoid, EGR valve, ground or voltage short in EGR circuit, or bad wiring.
P0534 OBD-II Trouble Code: Air Conditioner Refrigerant Charge Loss
P0534 code means that the AC compressor clutch is cycling to frequently often due to low refrigerant or inoperative cooling fans.

My 2002 Ford Expedition is running too lean with misfires.

Hello. It sounds like you may have a few issues going on here. I usually start by checking the codes in the computer myself. This will give me a good idea of what my be going on and what cylinders...

Was Traveling down the highway at 70 mph when my auto control clicked itself off and the car stalled 2010 Nissan Sentra

Hello. I have seen this frequently on this vehicle. Most of the time the issue is with the crank position sensor. This sensor tells the computer that the engine is rotating. If it fails the engine stops. These will go...

Is it possible to have a mechanic inspect a used car on location?

Yes, this is something one of our mechanics is able to do and is highly recommended. As you know, with any car the life expectancy of it depends largely on the maintenance schedule the owner has maintained, the driving conditions...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com