GMC Sierra 3500 HD Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a GMC Sierra 3500 HD Water Pump Replacement is $506 with $254 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 GMC Sierra 3500 HDV8-6.0LService typeWater Pump ReplacementEstimate$918.04Shop/Dealer Price$1084.28 - $1568.42
2015 GMC Sierra 3500 HDV8-6.0LService typeWater Pump ReplacementEstimate$916.42Shop/Dealer Price$1079.66 - $1561.56
2017 GMC Sierra 3500 HDV8-6.0LService typeWater Pump ReplacementEstimate$784.62Shop/Dealer Price$914.96 - $1298.04
2014 GMC Sierra 3500 HDV8-6.0LService typeWater Pump ReplacementEstimate$901.82Shop/Dealer Price$1064.93 - $1546.71
2018 GMC Sierra 3500 HDV8-6.0LService typeWater Pump ReplacementEstimate$945.21Shop/Dealer Price$1082.01 - $1469.94
2016 GMC Sierra 3500 HDV8-6.0LService typeWater Pump ReplacementEstimate$784.62Shop/Dealer Price$915.23 - $1298.51
2010 GMC Sierra 3500 HDV8-6.0LService typeWater Pump ReplacementEstimate$901.82Shop/Dealer Price$1064.95 - $1546.76
2013 GMC Sierra 3500 HDV8-6.0LService typeWater Pump ReplacementEstimate$901.82Shop/Dealer Price$1064.93 - $1546.71
Show example GMC Sierra 3500 HD Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Scott

39 years of experience
607 reviews
Scott
39 years of experience
GMC Sierra 3500 HD V8-6.6L Turbo Diesel - Oil Change - Broomfield, Colorado
Scott did a great job and I will be requesting again.

Juan

10 years of experience
426 reviews
Juan
10 years of experience
GMC Sierra 3500 HD V8-6.6L Turbo Diesel - Brake System Flush - Chapel Hill, North Carolina
Great at what does! Truck fixed and running great.

Robert

21 years of experience
1307 reviews
Robert
21 years of experience
GMC Sierra 3500 HD V8-6.6L Turbo Diesel - Pre-purchase Car Inspection - Brighton, Colorado
Robert was on time an completed the job as requested, would use his services again. Thanks! Mark L.

Roberto

10 years of experience
46 reviews
Roberto
10 years of experience
GMC Sierra 3500 HD V8-6.6L Turbo Diesel - Windshield Washer Tubes - Mesa, Arizona
Prompt and obviously knew what he was doing. Very satisfied with service.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of GMC Sierra 3500 HD services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Parking Brake Release Cable
If the parking brake won't engage or disengage, or the car feels sluggish and dragging, you may need to replace the parking brake release cable.
10 Cars With Great Residual Value
One One thing many people in the market for a new car don’t think about when making a final purchase is the vehicle’s estimated residual value. Residual value is how much a car will likely be worth (https://www.yourmechanic.com/article/the-best-used-cars-to-buy-to-maximize-resale-value) once its...
P0593 OBD-II Trouble Code: Cruise Control Multi-Function Input “B” Circuit High
P0593 means an error with the cruise control multi-function input B circuit, often caused by a interior spill that damages the cruise control switch.

Oil filter hard to get off

I have seen this before. It usually happens because the filter is over tightened when installed. Unfortunately the only was to get it off is to unscrew it. Contact a mechanic such as one from Your Mechanic, they will have...

possible bad ecm if I reset it will that help me in finding out if its bad.

Hi there. From the description you provided, it is unlikely, the ECM (electronic control module) is at fault. First and most important, when disconnecting the battery, always disconnect the negative terminal first and reconnect last. Starting with the positive terminal,...

Where is the evap canister and vent valve located on a 2014 impala?

This part is likely located on the engine near the intake manifold. It should have a plastic vacuum line or two attached to it. Some vehicles put this part near the gas tank as well.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com