GMC Sierra 1500 HD Classic EGR Vacuum Modulator Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,976)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,976)

EGR Vacuum Modulator Replacement Service

How much does a EGR Vacuum Modulator Replacement cost?

On average, the cost for a GMC Sierra 1500 HD Classic EGR Vacuum Modulator Replacement is $209 with $114 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 1500 HD ClassicV8-6.0LService typeEGR Vacuum Modulator ReplacementEstimate$343.01Shop/Dealer Price$410.02 - $588.53
Show example GMC Sierra 1500 HD Classic EGR Vacuum Modulator Replacement prices

What is the EGR Vacuum Modulator all about?

Your vehicle’s exhaust gas recirculation (EGR) system is used to reduce your engine’s emissions by lowering the combustion chamber temperature. This produces less nitrous oxides, and burns pollutants contained in the exhaust gas that are reintroduced into the intake manifold. If the EGR valve opens and allows exhaust gases into the intake, the engine runs more smoothly and efficiently. However, this is not the case at idle, when the engine needs the most vacuum for proper operation.

If the EGR valve opens at idle, you can experience a rough idle and possibly a knock. Engine power is negatively affected at low RPM’s. Engineers implemented a control that closes the EGR valve when the engine is running at lower RPM’s. The engine produces lower vacuum at lower engine speeds, so it’s natural that the control is modulated by the engine’s own vacuum. The EGR vacuum modulator is a diaphragm that closes when the engine vacuum drops to idle, and opens as soon as the vacuum increases. It’s also known as a vacuum modulated valve. If the EGR vacuum modulator is leaking vacuum, is blocked internally, or is leaking, the Check Engine light will come on and the engine may start to knock.

Keep in mind:

  • The EGR system assists in reducing engine emissions. An improperly operating EGR system can cause a smog test failure.
    • Vacuum hoses become brittle over time. Take precautions to not damage the vacuum hoses when working on the EGR system.

How it's done:

  • The EGR vacuum modulator is verified that it needs to be replaced. The engine top trim cover is removed to access the modulator.

  • The defective EGR vacuum modulator is removed from the bracket near the EGR valve and is disconnected.

  • The new EGR vacuum modulator is installed and reconnected.

  • The engine is started and the EGR vacuum modulator is tested for computer codes and operation.

  • The vehicle is road tested to ensure proper operation of the EGR vacuum modulator.

Our recommendation:

The EGR vacuum modulator does not have a replacement interval. It will likely need replacement at some time because it does contain a filter. It can be inspected any time a vacuum test needs to be performed on the engine vacuum. If the EGR vacuum modulator is deemed to be faulty, you will need to have it replaced by one of our expert technicians.

What common symptoms indicate you may need to replace the EGR Vacuum Modulator?

  • Check Engine light is on
  • Engine knock at idle
  • Engine idles rough

How important is this service?

The EGR system partly controls your vehicle’s emissions, and a faulty EGR vacuum modulator can cause your car to fail a smog test. In addition, your vehicle may not idle, or may knock at idle. It is recommended to replace a faulty EGR vacuum modulator as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(2,976)

Rating Summary
2,816
79
21
10
50
2,816
79
21
10
50

John

19 years of experience
86 reviews
John
19 years of experience
GMC G2500 V8-5.7L - Coolant is leaking - Memphis, Tennessee
Very knowledgeable, excellent work ethic, on time, and pleasant.

AARON

2021 years of experience
12 reviews
AARON
2021 years of experience
GMC Yukon V8-5.3L - Oil Pan Gasket - Roseville, California
Aaron is awesome!

Michael

16 years of experience
606 reviews
Michael
16 years of experience
GMC Envoy L6-4.2L - Electrical components are not working - Woodstock, Georgia
Knowledgeable, would use agian

Fred

17 years of experience
389 reviews
Fred
17 years of experience
GMC Yukon V8-5.3L - Throttle Body - Houston, Texas
Fred was able to fix issue with adjusting the throttle speed when he came back. Good job overall.

Excellent Rating

(2,976)

Rating Summary
2,816
79
21
10
50
2,816
79
21
10
50
Number of GMC services completed
32736+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Wheel Stud
Common signs include damaged threads on the wheel stud due to improper installation of the lug nuts onto the stud and rust on the wheel stud.
How to Lower a Vehicle’s Suspension
One of the most popular car modifications done today is lowering a vehicle’s suspension (https://www.yourmechanic.com/article/how-car-suspension-system-works). A vehicle’s suspension is...
10 Cars That Look Expensive but are Actually Cheap to Buy
There are inexpensive cars on the market that look high end. The Ford Mustang, Toyota Prius, and Honda Civic are good looking cars with low MSRPs.

Bad squeaking from under hood, could be pulley.

Hi there. This noise can become very annoying, especially if it is very loud. If the noise typically occurs when the engine is first started and then goes away it can be the alternator bearing. If it is a constant...

Unplugged wires ECM DTC

Hello. It is a common issue for the ABS control module to go bad on these trucks. Either the modules are ridiculously expensive or they just aren't available anymore. That is why the connector was unplugged. That is the "cheap"...

Did I pay to much?

If what you describe is all you had done then I would have to say it may have been on the high side of pricing for parts and labor. I would however need to see the work order to know...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com