GMC Sierra 1500 Classic Fuel Pressure Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Fuel Pressure Sensor Replacement Service

How much does a Fuel Pressure Sensor Replacement cost?

On average, the cost for a GMC Sierra 1500 Classic Fuel Pressure Sensor Replacement is $228 with $95 for parts and $133 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 1500 ClassicV6-4.3LService typeFuel Pressure Sensor ReplacementEstimate$393.69Shop/Dealer Price$465.86 - $650.89
2007 GMC Sierra 1500 ClassicV8-5.3LService typeFuel Pressure Sensor ReplacementEstimate$322.59Shop/Dealer Price$384.01 - $536.73
2007 GMC Sierra 1500 ClassicV8-5.3L HybridService typeFuel Pressure Sensor ReplacementEstimate$376.27Shop/Dealer Price$451.11 - $644.09
2007 GMC Sierra 1500 ClassicV8-6.0LService typeFuel Pressure Sensor ReplacementEstimate$344.53Shop/Dealer Price$411.40 - $580.55
2007 GMC Sierra 1500 ClassicV8-4.8LService typeFuel Pressure Sensor ReplacementEstimate$376.27Shop/Dealer Price$451.13 - $644.13
Show example GMC Sierra 1500 Classic Fuel Pressure Sensor Replacement prices

What is the Fuel Pressure Sensor all about?

In fuel-injected and diesel engines, fuel rail pressure sensors monitor the pressure in the fuel rail and report the reading to the engine control module. If any drop in pressure is detected, the engine control module compensates so that the fuel pump can restore the proper pressure. A valve controls this pressure; if the sensor ever fails, you should replace it. Sometimes, the entire fuel rail may need to be replaced, but the sensor is a weak point in the loop that is more prone to damage.

If the sensor is working properly, only the amount of fuel that is needed to make the engine run properly will be delivered. Minimal excess fuel will be circulated back to the tank in the fuel return line.

Keep in mind:

  • Other problems such as a faulty crank position sensor, cam position sensor, air flow sensor, boost pressure sensor, and temperature sensor can mimic symptoms of a bad fuel rail sensor.
  • Starting problems may have myriad causes that are entirely unrelated to sensors.

How it's done:

  • The fuel pressure is bled and battery is disconnected
  • The defective fuel rail sensor is removed
  • The new fuel rail sensor is installed
  • The battery is reconnected
  • The repair is verified and the vehicle road tested for proper operation

Our recommendation:

The fuel rail sensor is not part of a maintenance check, and is only addressed when it fails. If you suspect a problem with your fuel rail sensor or fuel delivery system, have one of our expert mechanics inspect and replace the fuel rail sensor if necessary.

What common symptoms indicate you may need to replace the Fuel Pressure Sensor?

  • Car won’t start
  • Car runs erratically
  • Check Engine light comes on and stays on

How important is this service?

If your fuel rail sensor is faulty, you may experience difficulty starting the engine or poor performance that could cause trouble in traffic. Have a failed fuel rail sensor replaced as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

David

25 years of experience
180 reviews
David
25 years of experience
GMC Sierra 1500 Classic V8-4.8L - Heater Blower Motor Resistor - Ocala, Florida
David was amazing. The part was difficult to find but he made numerous phone calls and drove to at least two different part stores to locate it, then he finished the work and did a very good job. I highly recommend him. Very friendly and knows his stuff.

Matt

15 years of experience
130 reviews
Matt
15 years of experience
GMC Sierra 1500 Classic V8-5.3L - Car is not starting - Puyallup, Washington
On time and figured out the problem quickly

Peter

25 years of experience
523 reviews
Peter
25 years of experience
GMC Sierra 1500 Classic V6-4.3L - Oil Change - Newhall, California
Awesome job and experience!!! Peter was very professional and knowledgeable.

William

20 years of experience
129 reviews
William
20 years of experience
GMC Sierra 1500 Classic V8-5.3L - Oil Pressure Sensor - Estero, Florida
Very good work. I will use William again.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of GMC Sierra 1500 Classic services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2011 Lexus LX 570
Despite Despite pressure on the automobile industry to produce more – and better – fuel-stingy options for the mass market, there remains a place for luxury SUVs that are neither size conscious nor gas conserving. The 570 stands firmly in...
P0453 OBD-II Trouble Code: Evaporative Emission Control Pressure Sensor High Input
P0453 code means that a reading from the engine’s evaporative pressure sensor is higher than normal due to fuel tank vapor leaks into the system.
The Difference Between a Sports Car Engine and a Regular Engine
While they are similar in modern design, most everyday car engines are optimized for fuel efficiency and sports car engines for speed and performance.

What does the electronic power steering (EPS) Warning Light mean?

The electronic power steering (EPS) Warning Light is located on the instrument panel. This light illuminates when the EPS is malfunctioning. When this light is lit, your steering may be a little heavier, and you should schedule an inspection as...

Door not unlocking or opening

You have several components on your door. Two specific ones that come into play here are the door handle and door latch. The door latch is what actually hold the door closed and where the locking mechanism is housed. There...

Won't stay running

Hello and thank you for your question. It seems to be the transmission that is causing the engine to stall out when you are putting the vehicle into drive. The transmission could have a converter clutch lock up issue causing...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com