GMC Sierra 1500 Classic Engine is sputtering Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(8)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(8)

Engine is sputtering Inspection Service

How much does a Engine is sputtering Inspection cost?

On average, the cost for a GMC Sierra 1500 Classic Engine is sputtering Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 1500 ClassicV8-5.3L HybridService typeEngine is sputtering InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2007 GMC Sierra 1500 ClassicV6-4.3LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2007 GMC Sierra 1500 ClassicV8-4.8LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2007 GMC Sierra 1500 ClassicV8-5.3LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2007 GMC Sierra 1500 ClassicV8-6.0LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
Show example GMC Sierra 1500 Classic Engine is sputtering Inspection prices

In almost all cases, a sputtering engine is trying to tell you that there is a deeper problem that requires immediate attention. An engine running out of gas will definitely sputter but if the gas gauge indicates full, the problem lies deeper inside the engine compartment.

An incomplete combustion in the engine will cause a sputter as can the ignition system. The fuel system, such as a blocked fuel injector may also cause the vehicle to sputter. While a sputtering engine may not seem like a major issue, it is a symptom of a bigger problem that will not self-correct and will eventually result in a much more expensive repair. The source of the sputter should be investigated and repaired as soon as possible.

How this system works:

A sputtering engine can have its root cause located in a number of different systems. Here are two of the more common ones, the exhaust and fuel system.

The exhaust system collects exhaust gases from the cylinder head via the exhaust manifold, which acts as a funnel diverting exhaust gases away from the cylinders. The gases are then released through the front pipe where they travel to the catalytic converter. The catalytic converter removes the harmful elements of the gases such as carbon monoxide and hydrogen monoxide, converting them into inert gases.

The gases exit the catalytic converter into the muffler, which reduces the noise levels of the engine, and finally the exhaust fumes exit the vehicle at the tail pipe.

The fuel system is responsible for storing and supplying fuel to the car to drive the engine. Fuel is mixed with air, atomized and vaporized. This happens in the engine intake system. This mixture is then compressed in the engine cylinder and then ignited which produces the energy which moves the pistons.

Common reasons for this to happen:

  • Leak in Exhaust Manifold: A leak in the exhaust manifold, which collects exhaust gases, can cause the engine to sputter or run unevenly. This condition can also cause the Check Engine light to trigger as well as present increased engine noise and poor performance from the engine. A cracked or leaking exhaust manifold can create dangerous driving condition as the escaping hot gases can melt nearby plastic components. It can also lead to exhaust fumes making their way into the car cabin.

  • Worn Seals or Gaskets: There are a number of gaskets and seals in the exhaust system and if any of them are failing it can create a rough or sputtering engine. Gaskets and seals wear down over time and will eventually have to be replaced. Failing to do this in a timely manner can damage the exhaust manifold which is a much more expensive repair.

  • Failing Catalytic Converter: If the engine is sputtering, running rough and has a smell of rotten eggs it is probably due to a failing catalytic converter. In most cases, the Check Engine light will trigger as well. When a converter starts to fail, it isn’t able to burn off the hydrocarbons in the exhaust, and is no longer breaking down the sulfur created by the engine. This leads to the strong rotten egg smell. Eventually the car will not start at all as the catalytic converter becomes totally blocked.

  • Malfunctioning Oxygen Sensors: Oxygen sensors measure how rich or lean the exhaust gases are when they leave the vehicles combustion chamber. The vehicle computer uses this information to adjust the amount of fuel entering the engine. A dirty or failing sensor puts too much or too little fuel into the engine causing it to run rough or sputter. Oxygen sensors must be replaced on a regular basis.

  • Dirty Fuel Injectors: Fuel injectors spray fuel into the cylinders. It is then mixed with air and ignited. Fuel injector nozzles can become clogged over time, which can lead to a sputtering engine, slow acceleration and the car not having enough power. Fuel injectors can be cleaned if the problem is caught early, but as the conditions worsens, the injectors may have to be replaced.

  • Bad or Dirty Spark Plugs: Spark plugs are responsible for igniting the fuel in the combustion chamber. If they are not working correctly or are dirty they don’t ignite the fuel cleanly and the car can misfire or sputter. The plugs will need to be replaced or cleaned.

  • Dirty Mass Airflow Sensor: The mass airflow sensor measures the amount of air that is entering the fuel injection system. It sends that information to the vehicle computer, which then delivers the proper amount of fuel to the combustion chamber. A dirty mass airflow sensor will send the wrong information the computer resulting in a rough running or sputtering engine.

  • Vacuum Leak: A leak in the vacuum system can lead to a sputtering or rough running engine. As the problem progresses the vehicle can hesitate or stall when accelerating.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the engine is sputtering issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

A mechanic will inspect your car's exhaust system and other important components of your vehicle. This includes the exhaust manifold, exhaust seals and gaskets, oxygen sensors, airflow sensors and more. It may be necessary for the mechanic to crank up your car to diagnose your engine's sputtering.

How important is this service?

In almost all cases, a sputter engine is a symptom of a more serious issue lurking below the surface. If the problem is not diagnosed and repaired in a timely manner the vehicle will likely start to stall, become hard to start and eventually stop running altogether.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Peter

25 years of experience
519 reviews
Peter
25 years of experience
GMC Sierra 1500 Classic V6-4.3L - Oil Change - Newhall, California
Awesome job and experience!!! Peter was very professional and knowledgeable.

David

25 years of experience
180 reviews
David
25 years of experience
GMC Sierra 1500 Classic V8-4.8L - Heater Blower Motor Resistor - Ocala, Florida
David was amazing. The part was difficult to find but he made numerous phone calls and drove to at least two different part stores to locate it, then he finished the work and did a very good job. I highly recommend him. Very friendly and knows his stuff.

Philippe

7 years of experience
4 reviews
Philippe
7 years of experience
GMC Sierra 1500 Classic V8-5.3L - Car is not starting - Cherry Hill, New Jersey
Very helpful and knowledgeable

William

20 years of experience
129 reviews
William
20 years of experience
GMC Sierra 1500 Classic V8-5.3L - Oil Pressure Sensor - Estero, Florida
Very good work. I will use William again.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of GMC Sierra 1500 Classic services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

What Material for Car Hoses Is the Strongest and Most Durable?
The The heat within your engine bay is deadly – it turns rubber hoses brittle, causing them to crack and wear. Obviously, you want to use the strongest and most durable material for your engine hoses to prolong life, ensure...
Rhode Island Parking Laws: Understanding the Basics
Drivers Drivers in Rhode Island need to be aware of the parking laws in their state and community. Failure to abide by the parking laws could mean fines, and it could mean your vehicle being towed to the impound yard....
P2565 OBD-II Trouble Code: Turbocharger Boost Control Position Sensor Circuit High
P2565 P2565 code definition If you were to break down the meaning of each part of the P2565 OBD-II trouble code, it would yield something like “B” Rocker Arm Actuator Control Circuit Open Bank 1. For the average person, that...

Will these tires fit my 2010 Chevrolet Malibu?

The 265/65 R17 tire (https://www.yourmechanic.com/article/how-to-tell-the-difference-in-size-for-a-car-tire-by-jason-unrau) is considerably larger than the OEM recommended tire size of 215/55 R17. They might be good for a 4x4 look, but not necessarily practical for a Malibu. Clearance within the vehicle's wheel wells will be...

Jerking reaction when accelerating

This may be related to a faulty throttle position sensor or potentially a dirty or failing mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement). The mass air flow sensor is a unit in the intake system that monitors air intake as it is...

Locked keys in trunk.

Hi there. You can use a slim jim tool or a coat hanger to open the driver door to get to a lever behind the driver seat to open the trunk. If your vehicle does not have a lever to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com