logo

GMC Sierra 1500 Classic Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(8)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a GMC Sierra 1500 Classic Brake Master Cylinder Replacement is $371 with $189 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 1500 ClassicV8-4.8LService typeBrake Master Cylinder ReplacementEstimate$579.78Shop/Dealer Price$679.03 - $966.25
2007 GMC Sierra 1500 ClassicV6-4.3LService typeBrake Master Cylinder ReplacementEstimate$568.07Shop/Dealer Price$665.02 - $950.52
2007 GMC Sierra 1500 ClassicV8-5.3LService typeBrake Master Cylinder ReplacementEstimate$568.07Shop/Dealer Price$665.05 - $950.58
2007 GMC Sierra 1500 ClassicV8-5.3L HybridService typeBrake Master Cylinder ReplacementEstimate$595.35Shop/Dealer Price$699.15 - $1005.13
2007 GMC Sierra 1500 ClassicV8-6.0LService typeBrake Master Cylinder ReplacementEstimate$568.07Shop/Dealer Price$666.97 - $953.93
Show example GMC Sierra 1500 Classic Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of GMC Sierra 1500 Classic services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(8)
Rating Summary
8
0
0
0
0
8
0
0
0
0

Chris

21 years of experience
448 reviews
Request Chris
Chris
21 years of experience
Request Chris
by Chris
GMC Sierra 1500 Classic V8-4.8L - Brake System Flush - Portland, Oregon
Awsome and friendly.

Michael

28 years of experience
672 reviews
Request Michael
Michael
28 years of experience
Request Michael
by Gary
GMC Sierra 1500 Classic V8-5.3L - Other Inspections - Phoenix, Arizona
Great prompt service. Very professional. I would recommend Michael to all my friends and family

Matt

16 years of experience
130 reviews
Request Matt
Matt
16 years of experience
Request Matt
by Brandon
GMC Sierra 1500 Classic V8-5.3L - Car is not starting - Puyallup, Washington
On time and figured out the problem quickly

William

27 years of experience
65 reviews
Request William
William
27 years of experience
Request William
by Rene
GMC Sierra 1500 Classic V8-4.8L - Oil/Fluid Leak - Pflugerville, Texas
He was very professional also explaining everything were I understood him what needs to be done

Excellent Rating

(8)
Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of GMC Sierra 1500 Classic services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

What are the Car Pool Rules in Indiana?
Indiana Indiana has some of the prettiest rural (https://www.yourmechanic.com/article/top-10-scenic-drives-in-indiana) roads in the country, but it also has a fair share of large freeways, which help the state’s residents commute to and from work, go to school and run errands, and...
Read more
Symptoms of a Bad or Failing Automatic Shutdown Relay
Common signs include the car starting but stalling immediately, the Check Engine Light turning on, and the engine not cranking when turning the key.
Read more
Indications a Car Needs an Alignment
Here are a few of the most common reasons your car may need an alignment
Read more

Should I change the camber of my wheels?

Suspension systems and the angles of wheels are engineered to work together for optimal performance and to minimize tire wear. It has become increasingly popular among the “tuner” scene to achieve the look of maxed camber, as the wheels visually...
Read more

Plugs get oil on them and misfire

The top most part of your engine is called the valve cover. On a V-shaped engine, you should have 2 valve covers. These valve covers are bolted to the top of the cylinder head and have gaskets in between the...
Read more

Motor idles fine, when you give it gas it bogged down, already changed the plugs,wires,distributor cap and rotor

Hi there, thanks for writing in about your Chevrolet C1500. It's highly likely the mass airflow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) is bad. To verify, a scan tool should be connected and observe voltage changes in the mass airflow sensor readings. Same for...
Read more
  1. Home
  2. Estimates
  3. GMC
  4. Sierra 1500 Classic
  5. Brake Master Cylinder Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com

Read FAQ
GET A QUOTE