GMC R3500 Car is slow to accelerate Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5)

Car is slow to accelerate Inspection Service

How much does a Car is slow to accelerate Inspection cost?

On average, the cost for a GMC R3500 Car is slow to accelerate Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1989 GMC R3500V8-6.2L DieselService typeCar is slow to accelerate InspectionEstimate$124.99Shop/Dealer Price$133.39 - $139.69
1990 GMC R3500V8-5.7LService typeCar is slow to accelerate InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1990 GMC R3500V8-6.2L DieselService typeCar is slow to accelerate InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1987 GMC R3500V8-6.2L DieselService typeCar is slow to accelerate InspectionEstimate$104.99Shop/Dealer Price$113.39 - $119.68
1991 GMC R3500V8-6.2L DieselService typeCar is slow to accelerate InspectionEstimate$104.99Shop/Dealer Price$113.42 - $119.75
1987 GMC R3500V8-5.7LService typeCar is slow to accelerate InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1988 GMC R3500L6-4.8LService typeCar is slow to accelerate InspectionEstimate$124.99Shop/Dealer Price$130.87 - $135.28
1988 GMC R3500V8-6.2L DieselService typeCar is slow to accelerate InspectionEstimate$124.99Shop/Dealer Price$131.24 - $135.94
Show example GMC R3500 Car is slow to accelerate Inspection prices

A car that is getting fuel and is properly tuned should take off quickly when the accelerator is pressed. A vehicle that is sluggish or slow to accelerate can be dangerous, especially at intersections and on-ramps.

Modern cars have a very complex system that delivers fuel to the engine and rids of the vehicle of exhaust gases. A failure in any part of this system can lead to a car that is slow to accelerate. In the majority of cases, the problem can be traced back to the fuel system.

A vehicle that is slow to accelerate should be repaired immediately as it can be dangerous to drive.

How this system works:

The fuel system is responsible for supplying fuel to the engine. Fuel is mixed with air, atomized and vaporized in the intake system, which provides power to drive the pistons of the engine. There are a variety of different fuel system types but most of them have the same basic parts.

The fuel tank stores the gasoline. Fuel is pulled through the fuel lines by the fuel pump and is fed into the fuel injectors. Older cars have a carburetor and throttle body injectors instead of fuel injectors. The fuel injectors spray gasoline into the cylinders where it is mixed with air and then ignites during the compression stage. The result is an explosion that moves the pistons.

Common reasons for this to happen:

  • Bad or Clogged Fuel Injector: Fuel injectors can become clogged due to contaminates in the fuel. Fuel injectors, by their very nature, must be very precise in controlling the amount of fuel that goes into the combustion chamber so they have very small passages that deliver the fuel. Over time these tiny passages will become clogged which impedes the delivery of fuel.

When an injector is clogged it can degrade the performance of the vehicle and the car may accelerate slowly or feel that it does not have enough power. Other symptoms include a rough idle, a vehicle that is hard to start and a decrease in fuel efficiency.

  • Defective Fuel Pump: The fuel pump pulls the fuel from the gas tank to the engine via the fuel lines. If the pump stops working, malfunctions, or becomes clogged, it will not supply enough fuel to the injectors. This can cause the vehicle to accelerate slowly, or even sputter and stall, especially at high speeds.

  • Clogged Fuel Filter: The job of the fuel filter is to filter out containments in the fuel and if it becomes clogged it can restrict the amount of fuel that reaches the injectors. This can cause a vehicle to accelerate slowly. Fuel filters are designed to be replaced on a regular basis.

  • Dirty Airflow Sensor: This part detects the mass of air that enters the fuel injection system and hands that information off to the engines’ computer which allows the computer to deliver the proper amount of fuel to the air. These sensors can become dirty or malfunction over time, which results in the wrong data being sent to the computer. A slow accelerating car is the result of this incorrect data. It may also trigger the Check Engine light.

  • Leaking Fuel Line: A leak in the fuel line will drain off enough fuel that it leaves a shortage for the injectors. This not only affects the performance of the car but will also create a dangerous situation. If you smell gasoline in the vicinity of the car or see a puddle of fuel underneath the vehicle, the car should be inspected and repaired immediately.

  • Vacuum Leak: A leak in the vacuum system can affect the ability of the car’s computer system to properly regulate the fuel to air ratio. One of the major symptoms of a vacuum leak is a car that is slow to accelerate or feels like it has a lack of power. In addition the check engine light will probably illuminate.

  • Failing Catalytic Converter: A failing or clogged catalytic converter will prevent the proper amount of air from going into the engine. In most cases the vehicle will run hotter than normal, will accelerate slowly and feel like there is a loss of power. Issues with the catalytic converter tend to be fairly expensive repairs.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the car is slow to accelerate issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car's fuel system for leaks and any defective parts. This includes fuel injectors, fuel pump, fuel filter, airflow sensors and other important components related to the vehicle's slow acceleration. It may be necessary to test drive the car in order to verify the acceleration issue and provide an accurate diagnosis.

How important is this service?

A car that accelerates slowly is a dangerous vehicle to drive, especially at intersections and on ramps. Failing to fix simple fuel system problems will often lead to a more expensive repair down the road and eventually a car that may not run at all. A slow accelerating car should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Tomas

17 years of experience
226 reviews
Tomas
17 years of experience
GMC R3500 V8-5.7L - Brake System Inspection - Newark, New Jersey
Pretty good. My inspection for my brakes went very quick, (a little too quick.) Not the most thorough inspection. However, Tomas came to the same conclusion that I had already suspected and the problem is now "dually" analyzed. 15 minutes, and I'm good. Tomas was quite knowledgeable and polite. He came with the proper tools and equipment to say the least and was promptly on time for the booked appointment. I would consider requesting Tomas again for similar work. Thanks again to Tomas and the team at YourMechanic for helping out.

Ronald

41 years of experience
357 reviews
Ronald
41 years of experience
GMC Yukon V8-5.3L - Car is slow to accelerate - Houston, Texas
Awesome work

Andrian

32 years of experience
185 reviews
Andrian
32 years of experience
GMC Yukon XL 1500 V8-6.0L - Car is slow to accelerate - Fort Lauderdale, Florida
Very knowledgeable and friendly answered all my questions explained what's going on with vehicle thoroughly.

Rodney

36 years of experience
561 reviews
Rodney
36 years of experience
GMC Envoy L6-4.2L - Car is slow to accelerate - Sacramento, California
Great service thanks

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of GMC Car is slow to accelerate Inspection services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

P2653 OBD-II Trouble Code: B Rocker Arm Actuator Control Circuit Low Bank1
P2653 means an open or shorted circuit in the B rocker arm actuator control circuit in bank 1 due to broken oil control valve or low oil levels.
P2788 OBD-II Trouble Code: Auto Shift Manual Adaptive Learning at Limit
P2788 means an issue with the adaptive learning system of the transmission which causes stalling at idle, harsh shifting and transmission overheating.
P0871 OBD-II Trouble Code: Transmission Fluid Pressure Sensor/Switch C Circuit Range/Performance
P0871 means there is an issue with the transmission fluid pressure, possibly that it is low, the pump is faulty, or the sensor is dirty.

Need help getting a keyless entry for my car

An aftermarket keyless entry system (https://www.yourmechanic.com/article/how-to-purchase-a-remote-keyless-entry-system-for-cars-by-brady-klopfer) may or may not be required. If the vehicle is equipped with original equipment electronic door locks, the key fob typically should be able to be programmed to work with your keyless entry (https://www.yourmechanic.com/article/how-to-purchase-a-remote-keyless-entry-system-for-cars-by-brady-klopfer)....

The flex pipe needs to be replaced.

Yes, the entire section of pipe the flex pipe is attached to can be replaced. For the best fit, consider ordering the part from your local dealer. The repair may take some time depending on how much rust has built...

Idling low at 1 to 1.5k rpm. can not get rpms above 3k.

It sounds like you may have a couple of different issues going on here. At idle your car should be hovering around 750-800 RPM's consistently. This is generally controlled by the idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) which a valve that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com