GMC K3500 Reduced Power light is on Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(1)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(1)

Reduced Power light is on Inspection Service

How much does a Reduced Power light is on Inspection cost?

On average, the cost for a GMC K3500 Reduced Power light is on Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 GMC K3500V8-7.4LService typeReduced Power light is on InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1982 GMC K3500L6-4.8LService typeReduced Power light is on InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1997 GMC K3500V8-6.5L Turbo DieselService typeReduced Power light is on InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1999 GMC K3500V8-6.5L Turbo DieselService typeReduced Power light is on InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1981 GMC K3500L6-4.8LService typeReduced Power light is on InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1983 GMC K3500V8-5.7LService typeReduced Power light is on InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1982 GMC K3500V8-5.7LService typeReduced Power light is on InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1985 GMC K3500V8-5.7LService typeReduced Power light is on InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example GMC K3500 Reduced Power light is on Inspection prices

A Reduced Power light usually indicates a fairly serious problem with the throttle system. When this light illuminates the vehicle will often go into a “safe mode”, which will severely limit the speed of the car and in some cases will render the vehicle un-drivable.

Since the Reduced Power light can trigger for a number of different reasons, tracking down the exact cause is extremely important, if the vehicle is not properly diagnosed and repaired, the Reduced Power light will trigger again, putting the vehicle in safe mode.

How this system works:

When the vehicle’s computer detects a fault in the engine that affects its drivability, performance, transmission or emission system it will trigger the reduced power light. It will also trigger if there is an issue with the electronic throttle, the accelerator pedal or the throttle module.

When a vehicle goes into reduced power mode it will seriously impact its performance. Some vehicle will be restricted to idle speed while others restrict speed to 20-30 miles per hour. The Reduced Power trigger will save Diagnostic Trouble Codes (DTCs), which will indicate where the fault occurred. In most cases, a Restricted Power light is related to a throttle body or the connector.

Common reasons for this to happen:

  • Faulty Throttle Body: A throttle body is part of the of the air intake system which helps control the amount of air going into the engine. If a throttle body is failing the engine will not get the correct mixture of air and fuel. This can trigger the Reduced Power light as well as lead to a poor running engine. It can also trigger the Check Engine light.

  • Failing Throttle Position Sensor: The throttle position sensor tells the vehicle computer the position of the gas pedal. The computer uses this information to calculate the proper amount of air and fuel to send to the engine. The throttle position sensor also controls shifting the gears of a vehicle, which means that a faulty throttle position sensor will prevent a car from changing gears. If this part is failing, the Reduced Power light will trigger.

  • Faulty Engine Control Unit: The engine control unit is an essential component of a vehicles computer. It regulates and controls many systems, including the drive train and parts of the engine. If a fault is detected in this crucial part, it can trigger the Reduced Power light as well as the Check Engine light. This is a major issue that should be investigated as soon as possible.

  • Faulty Wiring: Exposed or damaged wires can cause issues with the any of these components and will possibly trigger the Reduced Power light. A loose wiring crimp can also be the culprit. Wiring issues can be tricky to track down so using a professional mechanic is a necessity.

  • Malfunctioning Oxygen Sensors: Oxygen sensors are responsible for measuring how rich or lean exhaust gases are leaving a vehicles combustion chamber. The vehicle’s computer uses this information to constantly adjust the amount of fuel going into the engine. A failing or dirty sensor can put too much or too little fuel into the engine. While a failing oxygen sensor will usually trigger a Check Engine light it is possible that the Reduced Power light could also trigger.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the Reduced Power light issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your vehicle's air intake system, electrical wiring and sensors, including the throttle body and oxygen sensors, along with other important components. It may be necessary for the mechanic to test drive the car to verify the complaint and provide an accurate diagnosis.

How important is this service?

The Reduced Power light only illuminates if there is a serious issue with the vehicle that must be addressed immediately. In almost all cases, the throttle or the vehicles computer will be malfunctioning which can make driving the vehicle dangerous. While it varies by manufacturer, most vehicles that go into “safe mode” will stay there until the error codes are read by a code scanner.

If the vehicle Reduced Power light illuminates the vehicle should immediately be inspected, diagnosed and repaired.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(1)

Rating Summary
1
0
0
0
0
1
0
0
0
0

Alex

20 years of experience
138 reviews
Alex
20 years of experience
GMC K3500 V8-7.4L - Starter - Glen Ellyn, Illinois
Extremely professional and well versed in auto mechanics. Explained things simply and was able answer my questions clearly

Theodore

16 years of experience
1601 reviews
Theodore
16 years of experience
GMC K3500 L6-4.8L - Battery - Bellevue, Washington
Hes awesome, super helpful every time!

Francisco

10 years of experience
174 reviews
Francisco
10 years of experience
GMC K3500 V8-6.5L Turbo Diesel - Battery - Portland, Oregon
Francisco was great. Not a super complicated service this time, but he was very thorough and helpful. Thanks

Richard

21 years of experience
237 reviews
Richard
21 years of experience
GMC Sierra 1500 V8-6.2L - Reduced Power light is on - Cape Coral, Florida
Excellent service, timely and a big help with diagnosing issues with my vehicle.

Excellent Rating

(1)

Rating Summary
1
0
0
0
0
1
0
0
0
0
Number of GMC Reduced Power light is on Inspection services completed
11+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Is It Safe to Drive With a Diesel Leak?
While While diesel engines aren’t as popular in the US as they are in the UK and Europe, they do have their adherents, most notably in the heavy-duty truck sector. Diesel systems are very different from their gasoline counterparts, and...
P2338 OBD-II Trouble Code: Cylinder #3 Above Knock Threshold
P2338 P2338 Code Definition A P2338 code is a generic powertrain code related to an ignition-related problem, such as an engine misfire. It appears when the engine control module (ECM) has received a voltage reading outside the allowed variances from...
P0776 OBD-II Trouble Code: Pressure Control Solenoid B Performance
P0776 code means there is an abnormality within either the electronic pressure control circuit or solenoid often due too dirty fluids or faulty parts.

CEL limp mode reflash

Hello there. The type of issues you have described are not uncommon with the newer F series diesel trucks. The technical service bulletins (https://www.yourmechanic.com/article/how-to-use-a-technical-service-bulletin-by-parker-hill) are put out as a way to get vehicles repaired properly once a common failure point...

Thumping and shaking noises - 2013 Jaguar XK

If you are feeling this "shaking" through the steering wheel as well as "seat of the pants", it is likely your tires. While siting overnight, especially in cold weather, they develop a short-term "flat spot" where the tire rests on...

My 2001 Camry stalls in reverse.

Hi there. Check the conditions of when the engine is stalling out. Push the vehicle into a spot where you can start the engine and put the transmission in drive. Then see if the vehicle drives around. If the vehicle...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com