GMC K2500 Car is slow to accelerate Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(23)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(23)

Car is slow to accelerate Inspection Service

How much does a Car is slow to accelerate Inspection cost?

On average, the cost for a GMC K2500 Car is slow to accelerate Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 GMC K2500V8-6.5L DieselService typeCar is slow to accelerate InspectionEstimate$124.99Shop/Dealer Price$133.39 - $139.69
1995 GMC K2500V8-6.5L DieselService typeCar is slow to accelerate InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1994 GMC K2500V8-6.5L Turbo DieselService typeCar is slow to accelerate InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1992 GMC K2500V8-6.5L Turbo DieselService typeCar is slow to accelerate InspectionEstimate$104.99Shop/Dealer Price$113.39 - $119.68
1994 GMC K2500V8-5.0LService typeCar is slow to accelerate InspectionEstimate$104.99Shop/Dealer Price$113.42 - $119.75
1986 GMC K2500V8-6.2L DieselService typeCar is slow to accelerate InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1989 GMC K2500V8-5.7LService typeCar is slow to accelerate InspectionEstimate$124.99Shop/Dealer Price$130.87 - $135.28
1989 GMC K2500V6-4.3LService typeCar is slow to accelerate InspectionEstimate$124.99Shop/Dealer Price$131.24 - $135.94
Show example GMC K2500 Car is slow to accelerate Inspection prices

A car that is getting fuel and is properly tuned should take off quickly when the accelerator is pressed. A vehicle that is sluggish or slow to accelerate can be dangerous, especially at intersections and on-ramps.

Modern cars have a very complex system that delivers fuel to the engine and rids of the vehicle of exhaust gases. A failure in any part of this system can lead to a car that is slow to accelerate. In the majority of cases, the problem can be traced back to the fuel system.

A vehicle that is slow to accelerate should be repaired immediately as it can be dangerous to drive.

How this system works:

The fuel system is responsible for supplying fuel to the engine. Fuel is mixed with air, atomized and vaporized in the intake system, which provides power to drive the pistons of the engine. There are a variety of different fuel system types but most of them have the same basic parts.

The fuel tank stores the gasoline. Fuel is pulled through the fuel lines by the fuel pump and is fed into the fuel injectors. Older cars have a carburetor and throttle body injectors instead of fuel injectors. The fuel injectors spray gasoline into the cylinders where it is mixed with air and then ignites during the compression stage. The result is an explosion that moves the pistons.

Common reasons for this to happen:

  • Bad or Clogged Fuel Injector: Fuel injectors can become clogged due to contaminates in the fuel. Fuel injectors, by their very nature, must be very precise in controlling the amount of fuel that goes into the combustion chamber so they have very small passages that deliver the fuel. Over time these tiny passages will become clogged which impedes the delivery of fuel.

When an injector is clogged it can degrade the performance of the vehicle and the car may accelerate slowly or feel that it does not have enough power. Other symptoms include a rough idle, a vehicle that is hard to start and a decrease in fuel efficiency.

  • Defective Fuel Pump: The fuel pump pulls the fuel from the gas tank to the engine via the fuel lines. If the pump stops working, malfunctions, or becomes clogged, it will not supply enough fuel to the injectors. This can cause the vehicle to accelerate slowly, or even sputter and stall, especially at high speeds.

  • Clogged Fuel Filter: The job of the fuel filter is to filter out containments in the fuel and if it becomes clogged it can restrict the amount of fuel that reaches the injectors. This can cause a vehicle to accelerate slowly. Fuel filters are designed to be replaced on a regular basis.

  • Dirty Airflow Sensor: This part detects the mass of air that enters the fuel injection system and hands that information off to the engines’ computer which allows the computer to deliver the proper amount of fuel to the air. These sensors can become dirty or malfunction over time, which results in the wrong data being sent to the computer. A slow accelerating car is the result of this incorrect data. It may also trigger the Check Engine light.

  • Leaking Fuel Line: A leak in the fuel line will drain off enough fuel that it leaves a shortage for the injectors. This not only affects the performance of the car but will also create a dangerous situation. If you smell gasoline in the vicinity of the car or see a puddle of fuel underneath the vehicle, the car should be inspected and repaired immediately.

  • Vacuum Leak: A leak in the vacuum system can affect the ability of the car’s computer system to properly regulate the fuel to air ratio. One of the major symptoms of a vacuum leak is a car that is slow to accelerate or feels like it has a lack of power. In addition the check engine light will probably illuminate.

  • Failing Catalytic Converter: A failing or clogged catalytic converter will prevent the proper amount of air from going into the engine. In most cases the vehicle will run hotter than normal, will accelerate slowly and feel like there is a loss of power. Issues with the catalytic converter tend to be fairly expensive repairs.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the car is slow to accelerate issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car's fuel system for leaks and any defective parts. This includes fuel injectors, fuel pump, fuel filter, airflow sensors and other important components related to the vehicle's slow acceleration. It may be necessary to test drive the car in order to verify the acceleration issue and provide an accurate diagnosis.

How important is this service?

A car that accelerates slowly is a dangerous vehicle to drive, especially at intersections and on ramps. Failing to fix simple fuel system problems will often lead to a more expensive repair down the road and eventually a car that may not run at all. A slow accelerating car should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(23)

Rating Summary
21
0
0
0
2
21
0
0
0
2

Jim

33 years of experience
196 reviews
Jim
33 years of experience
GMC K2500 V8-7.4L - Oil Change - Pleasanton, California
Showed up early which was very much appreciated. Very professional.

Jeremy

16 years of experience
2 reviews
Jeremy
16 years of experience
GMC K2500 V8-5.7L - Oil Change - Citrus Heights, California
Great job, thank you

Johnathon

9 years of experience
164 reviews
Johnathon
9 years of experience
GMC K2500 V8-5.7L - Starter - Fresno, California
Great job!!

Steven

21 years of experience
200 reviews
Steven
21 years of experience
GMC K2500 V8-7.4L - Car idle is rough - Fort Worth, Texas
Very polite. Seemed knowledgeable.

Excellent Rating

(23)

Rating Summary
21
0
0
0
2
21
0
0
0
2
Number of GMC K2500 services completed
253+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

P2605 OBD-II Trouble Code: Intake Air Heater A Circuit
P2605 code means voltage variations have triggered the Check Engine Light due to open or shorted wires or connectors, or faulty heater element.
P2639 OBD-II Trouble Code: Torque Management Feedback Signal A Low
P2639 means a issue with one of the supporting control modules which may include transmission control module or fuel injection control module.
How to Replace an Oil Filter Housing Gasket on Most Cars
Oil filter housing gaskets fail when the oil light is on, there is oil visibly dripping from the filter, or oil pressure is lower than normal.

The car starts fine the first time, but then has difficult startup

The O2 Sensors or the Mass Airflow Sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-mass-airflow-sensor) may be bad. The list can go on. The engine computer will need to be tested and all codes diagnosed (https://www.yourmechanic.com/article/how-do-i-look-up-what-different-codes-mean). Since you drove the vehicle for a year with it...

I have a code P2119

Hi...Diagnostic Trouble Code P2119 (https://www.yourmechanic.com/article/throttle-actuator-control-throttle-body-range-performance-by-robert-kulp) indicates that there is a fault in your car's Electronic Throttle Control System. Electronically controlled throttles found on most modern vehicles utilize PCM programming to set and monitor the throttle position. Typically, the problem causing...

Please what gear oil is best for my Hyundai sonata 2005.

As you may know, there are a multitude of engine oils on the market all claiming to be the "best" and prolonging the life of your car's engine. One of the main questions you will be asked when changing your...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com