logo

GMC K2500 Suburban Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(9)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(9)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a GMC K2500 Suburban Control Arm Assembly Replacement is $236 with $96 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 GMC K2500 SuburbanV8-5.7LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$1038.76Shop/Dealer Price$1263.30 - $1928.82
1996 GMC K2500 SuburbanV8-7.4LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$1219.54Shop/Dealer Price$1444.69 - $2110.68
1999 GMC K2500 SuburbanV8-5.7LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$1025.35Shop/Dealer Price$1247.05 - $1907.96
1997 GMC K2500 SuburbanV8-5.7LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$856.80Shop/Dealer Price$991.32 - $1385.29
1997 GMC K2500 SuburbanV8-5.7LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$1025.35Shop/Dealer Price$1248.52 - $1910.54
1994 GMC K2500 SuburbanV8-7.4LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$1025.35Shop/Dealer Price$1247.19 - $1908.21
1994 GMC K2500 SuburbanV8-5.7LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$1229.74Shop/Dealer Price$1454.07 - $2116.97
1996 GMC K2500 SuburbanV8-6.5L Turbo DieselService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$1025.35Shop/Dealer Price$1247.05 - $1907.96
Show example GMC K2500 Suburban Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of GMC K2500 Suburban services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(9)
Rating Summary
9
0
0
0
0
9
0
0
0
0

Viktor

19 years of experience
7 reviews
Request Viktor
Viktor
19 years of experience
Request Viktor
by Megan
GMC K2500 Suburban V8-7.4L - Brake Pads Replacement (Front) - Denver, Colorado
Viktor was AMAZING! Not only did he do a great job replacing the brake pads, but he was very honest about pricing and what would need to be done on the car next. I will definitely be calling him again!

Peter

44 years of experience
1397 reviews
Request Peter
Peter
44 years of experience
Request Peter
by Simon
GMC K2500 Suburban V8-7.4L - Intake Manifold Gaskets - Peoria, Arizona
Excellent

Oswaldo

23 years of experience
29 reviews
Request Oswaldo
Oswaldo
23 years of experience
Request Oswaldo
by Sal
GMC K2500 Suburban V8-7.4L - Intake Manifold Gaskets - Piscataway, New Jersey
Very careful and detailed work performed. Excellent knowledge and properly equipped with the right tools to do the job. Oswaldo explains what he is doing and how he handles obstacles as needed along the way. Very clean work, no evidence of any leaks, spills or any debris at the site when finished. Will certainly contract again!

Oswaldo

23 years of experience
29 reviews
Request Oswaldo
Oswaldo
23 years of experience
Request Oswaldo
by Sal
GMC K2500 Suburban V8-7.4L - Oil Pressure Sensor - Piscataway, New Jersey
Very knowledgeable, professional and determined to get the job done. Well equipped with proper tools. Great interaction and follow-up with me after the work was completed. Will definitely work with him again!

Excellent Rating

(9)
Rating Summary
9
0
0
0
0
9
0
0
0
0
Number of GMC K2500 Suburban services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

What Does the Hybrid Drive System Malfunction Warning Light Mean?
The hybrid drive system malfunction light turns on when an issue is detected with the system. It could be due to problem with the battery or a fuse.
Read more
A Buyer’s Guide to the 2012 Honda Odyssey
Minivans Minivans may not be the sportiest, sleekest, or sexiest vehicles on the road, and people in the market for a vehicle to haul all of their kids, pets, and gear around may not be too preoccupied with how that...
Read more
How to Buy a Good Quality Brake Hose
Brake Brake hoses, sometimes used interchangeably with the term “brake lines,” carry brake fluid between the master cylinder and the wheel cylinder or brake calipers - depending upon the type of brakes you have. The pressure from the brake fluid...
Read more

Blew up radiator

If the engine got that hot then you will need a lot of work. Most of the time the cylinder head will warp too much and cause the head to need replacement. The other parts should always be replaced when...
Read more

this is a test question, please do NOT answer.

test answer
Read more

P0740 - Torque converter clutch malfunction.

Hi there. The torque converter clutch code has came on for the input shaft sensor has picked up a different speed when the engine is running. The clutch is slipping in and out of lock. Check the transmission fluid and...
Read more
  1. Home
  2. Estimates
  3. GMC
  4. K2500 Suburban
  5. Control Arm Assembly Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com

Read FAQ
GET A QUOTE