GMC K1500 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(40)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(40)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a GMC K1500 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1986 GMC K1500V8-5.0LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1999 GMC K1500V8-5.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1989 GMC K1500V8-5.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1998 GMC K1500V8-6.5L Turbo DieselService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1993 GMC K1500V8-6.2L DieselService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1992 GMC K1500V6-4.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1983 GMC K1500V8-5.0LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1996 GMC K1500V8-5.0LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example GMC K1500 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(40)

Rating Summary
39
1
0
0
0
39
1
0
0
0

Paul

23 years of experience
299 reviews
Paul
23 years of experience
GMC K1500 V8-5.7L - Car is not starting - Land O' Lakes, Florida
N/A

Richard

13 years of experience
601 reviews
Richard
13 years of experience
GMC K1500 V8-5.7L - Car AC Repair - Las Vegas, Nevada
Second time having Richard work on my vehicle. Great experience.

Terry

26 years of experience
326 reviews
Terry
26 years of experience
GMC K1500 V8-5.7L - Water Pump - Gilbert, Arizona
Terry was very professional, and proficient, I was impressed, and sure to recommend him to all my family and friends!!

Robert

48 years of experience
51 reviews
Robert
48 years of experience
GMC K1500 V8-5.0L - Car is not starting - Round Rock, Texas
Great guy very friendly and knowledgeable, got my car stared Thank you Robert

Excellent Rating

(40)

Rating Summary
39
1
0
0
0
39
1
0
0
0
Number of GMC K1500 services completed
440+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How Do I Prepare My Car for Winter?
Your Your car needs special care and attention during the cold months. To keep it running smoothly, follow these steps: Change your oil and oil filter regularly: Make sure you follow the recommendations as specified in your manual. You might...
P0112 OBD-II Trouble Code: IAT Sensor Circuit Low Input Problem
P0112 P0112 code definition Intake Air Temperature (IAT) sensor circuit low input problem What the P0112 code means P0112 is the OBD-II generic code that the engine control module (ECM) has recorded the IAT sensor input below the expected sensor...
P0131 OBD-II Trouble Code: O2 Sensor Circuit Low Voltage Bank 1 Sensor 1
P0131 code definition The P0131 code is low sensor voltage for oxygen sensor bank 1 sensor 1 or improper air fuel ratio....

Clutch won't engage. Replaced master cylinder ... Still not working

Hello. I usually start by checking the movement of the clutch slave cylinder (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-clutch-slave-cylinder) when the pedal is pushed in. If the slave cylinder is not moving, then the hydraulic system is at fault, which can be due to air...

Engine oil pressure sensor replaced oil light came on after replacing

The oil pressure light will usually come on when a few things could be happening. Either the motor is in fact low on oil, the oil pump could be failing or not pumping oil sufficiently or the oil pressure sending...

I have a 2005 ford escape that has this "Shudder" when i accelerate. I've heard of the product Dr. Tranny Instant Shudder Fixx

Generally, if this is not related to a faulty solenoid or other mechanical issue, this type of fix works well. Often times, the additives available on he market (including Dr. Tranny Instant Shudder Fixx) include cleaning agents that help to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com