GMC C2500 Brake fluid is leaking Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(22)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(22)

Brake fluid is leaking Inspection Service

How much does a Brake fluid is leaking Inspection cost?

On average, the cost for a GMC C2500 Brake fluid is leaking Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 GMC C2500V6-4.3LService typeBrake fluid is leaking InspectionEstimate$124.99Shop/Dealer Price$133.39 - $139.69
1989 GMC C2500V6-4.3LService typeBrake fluid is leaking InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1992 GMC C2500V8-6.2L DieselService typeBrake fluid is leaking InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1986 GMC C2500L6-4.8LService typeBrake fluid is leaking InspectionEstimate$104.99Shop/Dealer Price$113.39 - $119.68
1997 GMC C2500V8-6.5L Turbo DieselService typeBrake fluid is leaking InspectionEstimate$104.99Shop/Dealer Price$113.42 - $119.75
1992 GMC C2500V8-5.7LService typeBrake fluid is leaking InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1994 GMC C2500V8-5.0LService typeBrake fluid is leaking InspectionEstimate$124.99Shop/Dealer Price$130.87 - $135.28
1997 GMC C2500V8-5.7LService typeBrake fluid is leaking InspectionEstimate$124.99Shop/Dealer Price$131.24 - $135.94
Show example GMC C2500 Brake fluid is leaking Inspection prices

Your brakes are the most important safety system on your vehicle. It’s all too easy to take them for granted, but if they were to fail even once, the results could be catastrophic. Most automotive brake systems are hydraulic, which means that pressurized fluid is sent through the lines from the master cylinder to the calipers and drums in order to activate the pads/shoes and slow down the car. If your brake fluid is leaking, it’s a sign that there’s something seriously wrong.

How this system works:

Your brake system is both simple and complex. There are a number of parts required to make it work properly, but the underlying concept is not that difficult to understand. Your master cylinder is the heart of the system – it is responsible for both boosting brake performance (via the brake booster onto which the master cylinder mounts), and for holding and sending brake fluid through the system.

In a nutshell, your brake system works like this: You press the brake pedal, which activates the master cylinder. It pushes fluid into the lines and down to the calipers. The fluid pressure forces the calipers to close, squeezing the rotor between the brake pads. This creates drag and friction, slowing down the car.

However, if fluid is leaking from somewhere in the system, it could mean that you’ll have insufficient fluid for proper brake operation.

Common reasons for this to happen:

  • Worn Brake Pads: If you suspect fluid is leaking because the level in the reservoir is low, it might be nothing more than worn pads. As the pads wear, more fluid is held in the system (because the caliper piston remains farther out due to the reduced pad material).

  • Damaged Master Cylinder Reservoir: Over time, the plastic reservoir attached to your master cylinder becomes brittle due to heat exposure. It can eventually crack, allowing brake fluid to seep out and down the back of the engine.

  • Damaged Bleeder Valve: Each caliper has a bleeder. These valves allow mechanics to bleed air out of the lines, but they can become damaged (or can be knocked loose or even left loose after inexpert service).

  • Damaged Brake Line: Your car has both rubber and steel brake lines that carry fluid to and from the master cylinder. Both types are prone to wear and can be punctured. If this occurs, fluid will steadily leak out of the line.

  • Failed Wheel Cylinder: On drum brakes, one of the most likely culprits is the wheel seal. These will fail over time and through normal wear and tear, eventually weeping brake fluid.

  • Failed Piston Seal: The piston in your caliper is activated by fluid, and it’s a moving part, which means a seal is necessary to keep the fluid inside while allowing the piston to move. If the seal is damaged (cracked or punctured), it will leak brake fluid.

What to expect:

A professional mobile mechanic will come to your home or office to inspect your brake system, including the master cylinder, brake lines, drums, calipers and other components. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect all aspects of your vehicle’s brake system, including possibly checking trouble codes in the computer if the ABS light is on (set off by the brake fluid level sensor). The mechanic will trace the leak to its origin, and then advise you on the next step required to repair the problem.

How important is this service?

Without an operational brake system, your car cannot be legally or safely driven. Leaking fluid is cause for concern – if the fluid level drops below a certain level, the brakes will not work. It’s essential to have your brake system inspected during normal maintenance, and to pay close attention to the fluid level in the reservoir. Any leaks should be immediately inspected and repaired. One of our professional mechanics can inspect, diagnose and repair your brake fluid leak.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(22)

Rating Summary
21
1
0
0
0
21
1
0
0
0

Isai

27 years of experience
230 reviews
Isai
27 years of experience
GMC C2500 V8-7.4L - Car is not starting - San Antonio, Texas
Isai was extreemly knowledgable and willing to share his insights. He was also extreemly professional and promt.

Paul

33 years of experience
134 reviews
Paul
33 years of experience
GMC C2500 V8-5.7L - Fuel Injector - Middlesex, North Carolina
Once again professional service

Chris

20 years of experience
448 reviews
Chris
20 years of experience
GMC C2500 V8-5.7L - Oil/Fluid Leak - Portland, Oregon
Great!

Paul

33 years of experience
134 reviews
Paul
33 years of experience
GMC C2500 V8-5.7L - Check Engine Light is on - Middlesex, North Carolina
Well knowledgeable and professional

Excellent Rating

(22)

Rating Summary
21
1
0
0
0
21
1
0
0
0
Number of GMC C2500 services completed
242+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How Long Does a Power Window Switch Last?
Power Power windows are definitely convenient, particularly with the auto up and down functionality that’s now present in many newer cars. It sure beats having to manually roll the window up or down when you need to get some fresh...
P0468 OBD-II Trouble Code: EVAP Control System Malfunction
P0468 P0468 code definition The P0468 code is defined as Purge Flow Sensor Circuit High Input. Co-existing OBD-II codes may include P0440 or P0442, often indicating a loose gas cap, or P0443 through P0449, which can indicate an EVAP Purge...
P0479 OBD-II Trouble Code: Exhaust Pressure Control Valve Intermittent
P0479 code means there is an out-of-the-ordinary voltage reading from the exhaust pressure control valve circuit often due to damaged wiring.

Bleeding the brakes on a 98 dodge ram 2500 4wd 4 wheel abs. I read there are two valves that have to be bled off first?

You should first bleed the brakes normally and then hook up a DRB3 scanner and put ABS in bleed function to bleed out ABS system and then bleed system normally at each wheel again. Repeat as needed until all air...

Hi I have a 2010 Dodge avenger it starts up fine but the gear shifter seems to be disconnected from the gears it moves freely

I would recommend having your vehicle shifter and the vehicles transmission inspected by a qualified professional for damages. It is abnormal for the shifter to move freely and appear to not select any gear. It is very possible that something...

How to get a manual stuck in reverse out

In a manual transmission, being stuck in reverse could be due to clutch and/transmission failures. You can try moving the vehicle slightly and/or manipulating the shift mechanism right on the transmission case. That may only provide a temporary solution, though,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com