GMC C2500 Suburban Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a GMC C2500 Suburban Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1980 GMC C2500 SuburbanV8-5.7LService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1981 GMC C2500 SuburbanV8-7.4LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1981 GMC C2500 SuburbanV8-5.7LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1982 GMC C2500 SuburbanL6-4.8LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1984 GMC C2500 SuburbanV8-5.7LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1994 GMC C2500 SuburbanV8-7.4LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1996 GMC C2500 SuburbanV8-6.5L Turbo DieselService typeCar is not getting enough power InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1984 GMC C2500 SuburbanV8-7.4LService typeCar is not getting enough power InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example GMC C2500 Suburban Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Nathan

17 years of experience
279 reviews
Nathan
17 years of experience
GMC C2500 Suburban V8-7.4L - Car is not starting - Austin, Texas
Nice guy

Dia

32 years of experience
84 reviews
Dia
32 years of experience
GMC Sierra 1500 V8-5.3L - Car is not getting enough power Inspection - Atlanta, Georgia
Pleasant, Dia diagnosed and found numerous issues that needed to be addressed, will definitely use this service again. Thanks Dia

Ricardo

14 years of experience
339 reviews
Ricardo
14 years of experience
GMC Sierra 1500 V8-4.8L - Car is not getting enough power - Bell, California
Did an excellent job on cleaning the throttle and setting the calibrations to where it should read, I appreciate that he check or Inspected the rest if my truck and explain them to me and get them check out in the future . I would use Richardo again . He got an A+ in my book !!! Thank you, Luis Beza

Justin

20 years of experience
42 reviews
Justin
20 years of experience
GMC Envoy L6-4.2L - Car is not getting enough power - Mesa, Arizona
I would ike to have him work on any of my vehicles in the near future.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of GMC Car is not getting enough power Inspection services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Ford Fusion Hybrid
The The 2012 Ford Fusion Hybrid is a really great choice for anyone looking for a mid-size sedan. Not only does it boast plenty of room for people and cargo, but it also has a good amount of power and...
How to Buy a Good Quality Heater Blower Motor Resistor
Vehicles Vehicles that are equipped with a manual HVAC, or climate control, system utilize a blower motor resistor to control the speed of the heater blower. If you are driving a minivan or an SUV with a separate rear passenger...
How to Put on Snow Chains
Putting snow chains on your car tires makes winter driving safe and easy. It's smart to practice installing snow chains before snow starts to fall.

Valve adjustment on a 2010 Honda Odyssey

Yes it is bad if you don't do it. You'd want to have it checked at least. If they are not more than 4,000 of an inch off, you can leave them alone and drive it. But on Hondas, they...

bmw 335i rear main seal

The part required is the seal. A variety of special tools are required to perform the replacement including an engine support bar (and accessories), a transmission jack, a calibrated torque wrench, a flywheel holding tool, a seal removal tool and...

Customer attachment 2/19/2021 12:23:59 PM

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com