Geo Prizm Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(41)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(41)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Geo Prizm Car Thermostat Replacement is $210 with $70 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Geo PrizmL4-1.6LService typeCar Thermostat ReplacementEstimate$329.44Shop/Dealer Price$376.65 - $510.18
1997 Geo PrizmL4-1.6LService typeCar Thermostat ReplacementEstimate$320.43Shop/Dealer Price$365.87 - $498.08
1992 Geo PrizmL4-1.6LService typeCar Thermostat ReplacementEstimate$312.43Shop/Dealer Price$355.90 - $482.12
1996 Geo PrizmL4-1.6LService typeCar Thermostat ReplacementEstimate$320.43Shop/Dealer Price$365.90 - $498.12
1994 Geo PrizmL4-1.8LService typeCar Thermostat ReplacementEstimate$320.43Shop/Dealer Price$367.37 - $500.70
1993 Geo PrizmL4-1.8LService typeCar Thermostat ReplacementEstimate$320.43Shop/Dealer Price$366.04 - $498.37
1997 Geo PrizmL4-1.8LService typeCar Thermostat ReplacementEstimate$320.43Shop/Dealer Price$365.91 - $498.15
1990 Geo PrizmL4-1.6LService typeCar Thermostat ReplacementEstimate$312.43Shop/Dealer Price$355.90 - $482.12
Show example Geo Prizm Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Geo mechanics

Real customer reviews from Geo owners like you.

Excellent Rating

(41)

Rating Summary
36
4
0
0
1
36
4
0
0
1

Mike

10 years of experience
177 reviews
Mike
10 years of experience
Prizm 1997 - Car is not starting - Raleigh, NC
Mike is a professional who saved me a lot of trouble by diagnosing my problem correctly which also saved me some money.

John

15 years of experience
623 reviews
John
15 years of experience
Prizm 1997 - Starter - Orlando, FL
Professional

James

25 years of experience
835 reviews
James
25 years of experience
Prizm 1993 - Axle / CV Shaft Assembly - Orlando, FL
What a great experience! James is very knowledgeable and provided exceptional service. James was also timely in arriving and completing the job. Highly recommend! Thanks again!

Johnathon

6 years of experience
122 reviews
Johnathon
6 years of experience
Prizm 1993 - Door will not shut - Fresno, CA
Very helpful, and understanding

Excellent Rating

(41)

Rating Summary
36
4
0
0
1
36
4
0
0
1
Number of Geo Prizm services completed
451+
services done by our mechanics
TOTAL NUMBER OF EXPERT Geo MECHANICS
70+
experts on our platform

Recent articles & questions

P0873 OBD-II Trouble Code: Transmission Fluid Pressure Sensor/Switch C Circuit High
P0873 means the transmission fluid pressure level is abnormal due to Dirty, contaminated or burnt transmission fluid, or a faulty transmission system.
Symptoms of a Bad or Failing Throttle Body
Common signs include dirt, grime, and carbon deposits on the inside of the housing, electrical problems, vacuum leaks, and a very poor or high idle.
How Long Does a Trunk Latch Release Cable Last?
For For most prospective car buyers, finding a vehicle that can offer them both comfort and convenience is a top concern. With all of the different accessories that modern cars come with to enhance the overall convenience offered, you are...

Rough idling

Hi there. Most of the time, this is caused by a dirty throttle body (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-throttle-body). If there is build up in the throttle body bore, then the throttle plate will have trouble racing the correct location keeping the engine from...

Car runs lean, check engine light on

Hello. Thanks for writing in about your 2009 Audi A5 Quattro. If you are having a lean condition, then the fuel pressure needs to be checked. The most common cause of a lean code on this car is either low...

Engine

If the engine is revving up but the car does not move then you have a transmission slipping problem. If it has a manual transmission then it may be the clutch. Either way it is a transmission problem and will...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com