Geo Metro Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(18)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(18)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Geo Metro Wheel Bearings Replacement is $167 with $27 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Geo MetroL3-1.0LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$214.64Shop/Dealer Price$233.15 - $280.58
1997 Geo MetroL3-1.0LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$205.63Shop/Dealer Price$222.37 - $268.48
1993 Geo MetroL4-1.3LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$705.87Shop/Dealer Price$847.70 - $1269.00
1990 Geo MetroL3-1.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$282.47Shop/Dealer Price$308.05 - $379.37
1997 Geo MetroL4-1.3LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$205.63Shop/Dealer Price$223.87 - $271.10
1992 Geo MetroL3-1.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$282.47Shop/Dealer Price$308.23 - $379.69
1997 Geo MetroL4-1.3LService typeWheel Bearings - Driver Side Front ReplacementEstimate$352.95Shop/Dealer Price$396.17 - $520.37
1993 Geo MetroL3-1.0LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$205.63Shop/Dealer Price$222.40 - $268.52
Show example Geo Metro Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Geo mechanics

Real customer reviews from Geo owners like you.

Excellent Rating

(18)

Rating Summary
18
0
0
0
0
18
0
0
0
0

Pardeep

22 years of experience
1277 reviews
Pardeep
22 years of experience
Geo Metro L3-1.0L - Car is not starting - San Jose, California
He was prompt,professional and knowledgeable.I was very pleased with the work.

Tinashe

14 years of experience
781 reviews
Tinashe
14 years of experience
Geo Metro L3-1.0L - Pre-purchase Car Inspection - Acworth, Georgia
Tinashe let me know when he was on his way to the inspection and called me once it was complete. He went over everything he found with me on the phone and also sent a complete and detailed report. Very thorough and I'm having him do another inspection for me this week. Definitely recommend his services if you are considering purchasing a vehicle on craigslist (or anywhere) and need a professional opinion.

Vladimir

11 years of experience
214 reviews
Vladimir
11 years of experience
Geo Metro L3-1.0L - Fuel Injector - Roseville, California
Very knowledgeable and punctual. A professional.

David

17 years of experience
639 reviews
David
17 years of experience
Geo Metro L3-1.0L - Front Crankshaft Seal - Vacaville, California
David. Was fantastic.. Very professional and polite. Answered any questions that I had. Made sure I was aware of what had caused the problem in my car. Very friendly too.

Excellent Rating

(18)

Rating Summary
18
0
0
0
0
18
0
0
0
0
Number of Geo Metro services completed
198+
services done by our mechanics
TOTAL NUMBER OF EXPERT Geo MECHANICS
70+
experts on our platform

Recent articles & questions

How Are Sensors Used to Improve a Car’s Performance?
Modern vehicles utilize a series of car sensors to improve performance and reduce emissions. The oxygen sensor helps reduce tailpipe emissions.
Understanding Runaway Truck Ramps
Runaway truck ramps slow down and stop trucks that have lost control of their downhill speed.
How to Renew Your Car Registration in Idaho
For For most people, driving a car is important due to the freedom that it gives them. In order to pay for this freedom, a car owner will have to make sure that they keep their car registered. The state...

I need to replace water pump.

I would ask for help from a mechanic. Possibly from YourMechanic. They can come to you and diagnose why your car is overheating (https://www.yourmechanic.com/services/car-is-overheating-inspection) and recommend what repairs are needed.

Smell smoke when starting

The smell of smoke may indicate that you have a slight oil leak on your engine somewhere. The hood will get hot, and this is normal. The engine compartment can be 200 degrees fahrenheit or maybe even a little hotter....

My 2014 ford focus whenni hit the lock button on my remote the beep does not sound and the horn does not work either.

Hello, thank you for writing in. The vehicle has a fuse that is specifically for the horn, and you are going to want to check that first. If the fuse is blown, it is a simple fix in which you...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com