Ford Thunderbird Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(165)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(165)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Ford Thunderbird Power Steering Pressure Hose Replacement is $219 with $79 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Ford ThunderbirdV8-4.6LService typePower Steering Pressure Hose ReplacementEstimate$359.36Shop/Dealer Price$403.51 - $525.41
2005 Ford ThunderbirdV8-3.9LService typePower Steering Pressure Hose ReplacementEstimate$574.84Shop/Dealer Price$645.75 - $849.84
1995 Ford ThunderbirdV6-3.8L TurboService typePower Steering Pressure Hose ReplacementEstimate$520.50Shop/Dealer Price$574.42 - $726.98
1991 Ford ThunderbirdV6-3.8L TurboService typePower Steering Pressure Hose ReplacementEstimate$520.50Shop/Dealer Price$574.41 - $726.97
2004 Ford ThunderbirdV8-3.9LService typePower Steering Pressure Hose ReplacementEstimate$574.84Shop/Dealer Price$648.90 - $855.34
1996 Ford ThunderbirdV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$373.89Shop/Dealer Price$429.41 - $591.04
1992 Ford ThunderbirdV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$373.89Shop/Dealer Price$429.27 - $590.80
1995 Ford ThunderbirdV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$373.89Shop/Dealer Price$429.26 - $590.76
Show example Ford Thunderbird Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(165)

Rating Summary
157
3
2
0
3
157
3
2
0
3

Patrick

33 years of experience
369 reviews
Patrick
33 years of experience
Ford Thunderbird V8-5.0L - Door Lock Switch Replacement (Driver Side Front, Passenger Side Front) - Las Vegas, Nevada

Jay

38 years of experience
1035 reviews
Jay
38 years of experience
Ford Thunderbird V8-6.4L - Starter - Ontario, California
One of the most knowledgeable and efficient mechanics I’ve met in a while. Great recommendation.

ALAA

38 years of experience
56 reviews
ALAA
38 years of experience
Ford Thunderbird V8-4.6L - Control Arm Assembly Replacement - Folsom, California
Timely, competent, and focused on the job at hand. He answered all of my questions and explained some other issues about the car. Thank you.

Jason

33 years of experience
617 reviews
Jason
33 years of experience
Ford Thunderbird V8-5.8L - fuel hose replacement - Saratoga, California
great all around experience - super convenient and Jason totally knows what he is doing

Excellent Rating

(165)

Rating Summary
157
3
2
0
3
157
3
2
0
3
Number of Ford Thunderbird services completed
1815+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

What Does It Mean When My Car Is "Burning" Oil?
Burning oil is usually caused by leaking oil that burns up on hot engine or exhaust components. Fix leaking oil to prevent expensive car repairs.
P0187 OBD-II Trouble Code: Fuel Temperature Sensor "B" Circuit Low Input
P0187 P0187 trouble code definition Fuel Temperature Sensor “B” Circuit Low Input What the P0187 code means The fuel temperature sensor detects the existence of fuel contamination (water, ethanol and dirt) inside the fuel tank, as well as monitoring the...
How to Wash Cars For Money
The available ways to make a profit are limited only by your imagination but, sometimes, it’s easier to go old-school with something like washing cars (https://www.yourmechanic.com/article/how-to-hand-wash-a-car). It’s a service every driver needs on occasion, and it doesn’t necessarily require a...

Difficulty starting, occasionally there is no cranking

The security chip and the sensor ring that sees the chip can cause the issue. The first thing to try is another key that is not worn. If this works, then have more keys made; this should fix your issue....

Brake pressure problems

One of the most common causes of the brake pedal going to the floor is a loss of brake fluid. Generally, this is easy to detect due to the fact that there is usually brake fluid leaking on the ground...

Why does my 2006 Ford Fusion stall.

Hi there. Your Fusion can be stalling for any number of reasons. If the fuel system is producing as much pressure as you are stating then the fuel system should be fine. It sounds like you may have an issue...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com