Ford Taurus Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(975)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(975)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Ford Taurus Fuel Injector Replacement is $403 with $263 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Ford TaurusV6-3.8LService typeFuel Injector ReplacementEstimate$1647.68Shop/Dealer Price$1982.27 - $2968.22
1994 Ford TaurusV6-3.8LService typeFuel Injector ReplacementEstimate$2357.46Shop/Dealer Price$2870.56 - $4400.80
2003 Ford TaurusV6-3.0LService typeFuel Injector ReplacementEstimate$1245.92Shop/Dealer Price$1488.12 - $2206.37
1990 Ford TaurusV6-3.0LService typeFuel Injector ReplacementEstimate$1555.44Shop/Dealer Price$1881.95 - $2853.95
2013 Ford TaurusV6-3.5L TurboService typeFuel Injector ReplacementEstimate$4313.17Shop/Dealer Price$5228.95 - $7939.56
2017 Ford TaurusL4-2.0L TurboService typeFuel Injector ReplacementEstimate$1922.81Shop/Dealer Price$2355.21 - $3646.12
1998 Ford TaurusV8-3.4LService typeFuel Injector ReplacementEstimate$4527.17Shop/Dealer Price$5555.09 - $8626.21
1994 Ford TaurusV6-3.2LService typeFuel Injector ReplacementEstimate$1924.43Shop/Dealer Price$2353.57 - $3634.74
Show example Ford Taurus Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(975)

Rating Summary
900
42
7
7
19
900
42
7
7
19

Charles

26 years of experience
21 reviews
Charles
26 years of experience
Taurus 2003 - Fuel is leaking from gas tank - Altadena, CA
Charles arrived exactly on time, and was very courteous and knowledgeable. He quickly identified the source of my fuel leak, and suggested a course of action. I will be following up on his suggestion. I highly recommend Charles, and the "Your Mechanic" service to everyone.

William

14 years of experience
95 reviews
William
14 years of experience
Taurus 2000 - Air Pump - Denver, CO
Will arrived early, was informative and completed the requested repair in the time frame estimated. He also provided an assessment of other items which should be addressed.

William

14 years of experience
95 reviews
William
14 years of experience
Taurus 2007 - Fuel Pump - Denver, CO
William showed up on time. Very knowledgeable, courteous, pleasant to talk to. He explained what he was doing. Asked him what SUV he would recommend. He said any of the mechanics could even go and do a 125 point inspection on a vehicle I may be thinking of buying in the future which I thought was great. He is fantastic. Will definitely use William again for any car repairs.

William

14 years of experience
95 reviews
William
14 years of experience
Taurus 2007 - Fuel Filter - Denver, CO
William showed up on time. Very knowledgeable, courteous, pleasant to talk to. He explained what he was doing. Asked him what SUV he would recommend. He said any of the mechanics could even go and do a 125 point inspection on a vehicle I may be thinking of buying in the future which I thought was great. He is fantastic. Will definitely use William again for any car repairs.

Excellent Rating

(975)

Rating Summary
900
42
7
7
19
900
42
7
7
19
Number of Ford Taurus services completed
10725+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

A Buyer's Guide to the 2012 Nissan Titan
With With the 2012 Titan, Nissan continues its march into domestic territory. This model lives up to its name, but it’s also quite impressive inside as well. Even if you are in the market and wouldn’t normally consider a truck,...
Rules of the Road for All States
Following Following the “rules of the road” is important to maintain your spot as a member of the safe driving (https://www.yourmechanic.com/article/auto-safety-tips-by-maddy-martin) community and reducing crashes (https://www.yourmechanic.com/article/how-to-survive-a-car-collision-by-joyce-morse) and related injuries. Traffic accidents injure and take the lives of thousands of people...
What Causes the AC System to Leak?
Your car’s air conditioner is responsible for keeping the interior cool and comfortable on hot days. However, in order to do that,...

Will bad brake calipers cause excessive vibrating in steering wheel while driving?

This may very well be caused by the uneven wear on the front tires. When uneven tread is subjected to various road conditions or braking power, this will definitely cause a vibrating or shaking feeling. This may also be caused...

P0401

Hi Mushi. Thanks for writing in today. Sometimes the initial diagnosis based on the error code is not the actual source of the problem. In the case of the P0401, the code (https://www.yourmechanic.com/article/p0401-obd-ii-trouble-code-exhaust-gas-recirculation-flow-malfunction-by-jay-safford) indicates that that the engine control module...

It started over heating yesterday... didn't notice any leaks at the time. Today I put antifreeze in the reservoir because it was a little low ran to the store 3 miles away and it over heats again. I turned the heat on high and hot and it was blowing cold air with no condensation anywhere. Got home and it is leaking somewhere next to the firewall but I can't see it. So is it a radiator hose?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com