Ford Ranger Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(26)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(26)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Ford Ranger Car Battery Replacement is $298 with $158 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Ford RangerV6-3.0LService typeCar Battery ReplacementEstimate$475.20Shop/Dealer Price$558.85 - $801.70
1992 Ford RangerV6-2.9LService typeCar Battery ReplacementEstimate$466.19Shop/Dealer Price$548.07 - $789.60
1998 Ford RangerL4-2.5LService typeCar Battery ReplacementEstimate$462.51Shop/Dealer Price$543.50 - $782.28
2000 Ford RangerV6-4.0LService typeCar Battery ReplacementEstimate$462.51Shop/Dealer Price$543.50 - $782.28
2023 Ford RangerL4-2.3L TurboService typeCar Battery ReplacementEstimate$745.99Shop/Dealer Price$899.32 - $1351.82
1996 Ford RangerV6-3.0LService typeCar Battery ReplacementEstimate$466.19Shop/Dealer Price$548.24 - $789.89
1997 Ford RangerV6-4.0LService typeCar Battery ReplacementEstimate$466.19Shop/Dealer Price$548.11 - $789.67
2008 Ford RangerV6-4.0LService typeCar Battery ReplacementEstimate$462.51Shop/Dealer Price$543.50 - $782.28
Show example Ford Ranger Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(26)

Rating Summary
25
0
0
0
1
25
0
0
0
1

Fernando

10 years of experience
27 reviews
Fernando
10 years of experience
Ranger 2003 - Battery - Lake Stevens, WA
Fernando is awesome! Stellar service, professional and just great to work with. I would call him for any automotive needs in the future.

Jesse

15 years of experience
14 reviews
Jesse
15 years of experience
Ranger 2000 - Spark Plugs - Daytona Beach, FL
Jesse was on time. And did a great job.

Jesse

15 years of experience
14 reviews
Jesse
15 years of experience
Ranger 2000 - Car is not starting - Daytona Beach, FL
Jesse is a very knowledgeable, courteous mechanic. He is definately trustworthy and competent.

Jesse

15 years of experience
14 reviews
Jesse
15 years of experience
Ranger 2000 - Starter - Daytona Beach, FL
Jesse is a very knowledgeable, courteous mechanic. He is definately trustworthy and competent.

Excellent Rating

(26)

Rating Summary
25
0
0
0
1
25
0
0
0
1
Number of Ford Ranger Car Battery Replacement services completed
286+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

What Are the Dangers of a Vehicle With a Bad Exhaust System?
Your Your car’s exhaust plays a vital role in several different things. It affects engine performance. It reduces noise while driving. It also protects you from potentially lethal carbon monoxide fumes. If your car’s exhaust has seen better days, there...
P0631 OBD-II Trouble Code: VIN Not Programmed or Incompatible – TCM
P0631 means the transmission control module failed to recognize the VIN, often due to a damaged PCM or module-related wiring.
How to Get Better Gas Mileage with Your Toyota Prius
The The Toyota Prius is considered one of the cleanest, environmentally friendly vehicles to drive based on the amount of smog-forming emissions that most other vehicles put out. The Prius is a full hybrid electric vehicle that combines the use...

I have white/bluish smoke coming out of the exhaust occasionally. I have no power loss and it happens infrequently.

I suggest you study the smoke and try to recognize a pattern. It might mean that you have to spend a lot of time looking in the mirror, so try not to be unsafe. If you are having a problem...

What's the cost on a repair for a value seal replacement

Hello, thank you for writing in. The cost of replacing your valve seals is going to vary by the technicians available in your area, and the availability of parts. Unfortunately, accessing the valves can be very difficult and its can...

I took my car in a few times now because when I am coming to a stop the rear end is shaking. First they said it was my tires, so we replaced them, then they said it was my rims, replaced those, then they said it was my breaks, and we got those taken care of. After that it was still doing the same thing, and they ended up replacing the rear right hub, which did not resolve the issue. I received notice that there is a recall on the rear [suspension](/topics-suspension-ford/) to link, Is there a way this could be the root of all these issues?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com