Ford Five Hundred Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(147)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(147)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Ford Five Hundred Power Steering Pump Replacement is $388 with $150 for parts and $238 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Ford Five HundredV6-3.0LService typePower Steering Pump ReplacementEstimate$563.26Shop/Dealer Price$644.32 - $873.73
2007 Ford Five HundredV6-3.0LService typePower Steering Pump ReplacementEstimate$547.94Shop/Dealer Price$626.00 - $853.16
2005 Ford Five HundredV6-3.0LService typePower Steering Pump ReplacementEstimate$547.94Shop/Dealer Price$626.04 - $853.23
Show example Ford Five Hundred Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(147)

Rating Summary
137
5
1
1
3
137
5
1
1
3

Bryant

8 years of experience
568 reviews
Bryant
8 years of experience
Five Hundred 2006 - Starter - Indianapolis, IN
Great!

Aurelio

35 years of experience
42 reviews
Aurelio
35 years of experience
Five Hundred 2005 - Exhaust Gas Recirculation/EGR Valve - Cibolo, TX
Great job replacing my ERG valve! Could not have done it on my own. Had all the right tools and patience to turn those rusted bolts.

Mike

10 years of experience
177 reviews
Mike
10 years of experience
Five Hundred 2006 - Control Arm Assembly - Raleigh, NC
Mike is very friendly and knowledgeable. You can tell he cares about his clients and making them aware of the service he is providing. I will definitely be a returning customer.

Jermaine

22 years of experience
147 reviews
Jermaine
22 years of experience
Five Hundred 2005 - Car starts and then dies - Hyattsville, MD

Excellent Rating

(147)

Rating Summary
137
5
1
1
3
137
5
1
1
3
Number of Ford Five Hundred services completed
1617+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Cold Start Injector
Common signs include hard starting, a decrease in fuel efficiency, and engine performance issues.
The Traveler’s Guide to Driving in Turkey
Turkey Turkey has a fascinating culture and a rich history, and as such, it can be a fantastic place to take a vacation. You will find countless sites to visit (http://opentravel.com/Things-To-Do-In-Turkey-Attractions) and explore. Some of the most popular include the...
P0854 OBD-II Trouble Code: Drive Switch Input Circuit Low
P0854 means there is an issue with the voltage signal for the drive switch input, possibly due to a faulty sensor or switch.

Car won't start

There are several issues that could be related to your car not starting: Faulty crankshaft sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) Faulty camshaft sensor (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement) Burnt engine valves Blown head gasket No spark getting to the spark plug (https://www.yourmechanic.com/services/spark-plugs-replacement) Lack of fuel pressure from...

Dashboard lights not working

Hello, you can turn the service lights off by disconnecting the negative battery cable for a few hours. To help find the pulled wire, have the dealership or technician use a scan tool capable of diagnosing canbus lines. The test will...

Car won't start

Without seeing the extent of the damages it would be hard to figure out the part that is damaged. I suspect the steering column ignition switch got damaged.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com