Ford Festiva Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Ford Festiva Power Steering Pressure Hose Replacement is $310 with $156 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Ford FestivaL4-1.3LService typePower Steering Pressure Hose ReplacementEstimate$500.24Shop/Dealer Price$586.64 - $836.91
1993 Ford FestivaL4-1.3LService typePower Steering Pressure Hose ReplacementEstimate$504.93Shop/Dealer Price$589.56 - $838.52
1992 Ford FestivaL4-1.3LService typePower Steering Pressure Hose ReplacementEstimate$490.33Shop/Dealer Price$574.81 - $823.65
1991 Ford FestivaL4-1.3LService typePower Steering Pressure Hose ReplacementEstimate$490.33Shop/Dealer Price$574.81 - $823.64
Show example Ford Festiva Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Larry

20 years of experience
125 reviews
Larry
20 years of experience
Ford Festiva L4-1.3L - Brake Pads Replacement (Front, Rear) - Oakland, California
Went above and beyond to get the job done

Vladimir

11 years of experience
214 reviews
Vladimir
11 years of experience
Ford Festiva L4-1.3L - Water Pump - Sacramento, California
Very professional and knowledgeable, even when played around with my kids when they were being annoying. Great guy. Definitely using him in the future and referring him to others.

Caster

29 years of experience
176 reviews
Caster
29 years of experience
Ford Festiva L4-1.3L - Check Engine Light is on - Rohnert Park, California

Ralph

39 years of experience
207 reviews
Ralph
39 years of experience
Ford Festiva L4-1.3L - Water Pump Replacement - Bonney Lake, Washington
He knew what to do on a very tricky job. Best mechanic I've dealt with in last 15 years.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Ford Festiva services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

P3465 OBD-11 Trouble Code: Cylinder 9 Deactivation/Intake Valve Control Circuit/Open
What What the P3465 code means This code indicates that there is a problem with the exhaust valve on cylinder number 9. When your vehicle’s powertrain control module (PCM) recognizes that the measured values of the mass airflow sensor, the...
Insurance Requirements for Car Registration in Idaho
The The state of Idaho requires that all drivers carry certain types of automotive insurance, or “financial responsibility,” in order to operate a vehicle legally. This is required whether the vehicle is registered or not. The minimum liability insurance required...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Michigan
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in Michigan at the Michigan Trucking Association.

Battery Drain on 2012 Honda Civic

Using a trickle charger can be good for cars that are only driven occasionally, but in this case it would just be masking a larger problem. You likely have a parasitic draw on the electrical system, though you should have...

Does the 2008 Kia Optima have an ABS system? Does anything need to be pressed when changing the wheel hub/bearing assembly?

Hi Laura. Thanks for writing in today. In regards to whether your 2008 Kia Optima has ABS, that depends on what model you have. ABS is an optional upgrade that is available in multiple trim levels. The best way to...

WHERE IS 2006 KIA SEDONA BACKUP LIGHT SWITCH? BULBS GOOD.

The reverse lights are controlled by the neutral safety switch on the transmission as a computer input to the front control and rear control modules. These modules are accessed by using a scanner to scan for codes and data input...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com