Ford E-Transit Reduced Power light is on Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(21,238)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(21,238)

Reduced Power light is on Inspection Service

How much does a Reduced Power light is on Inspection cost?

On average, the cost for a Ford E-Transit Reduced Power light is on Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2022 Ford E-TransitElectricService typeReduced Power light is on InspectionEstimate$124.99Shop/Dealer Price$133.39 - $139.69
Show example Ford E-Transit Reduced Power light is on Inspection prices

A Reduced Power light usually indicates a fairly serious problem with the throttle system. When this light illuminates the vehicle will often go into a “safe mode”, which will severely limit the speed of the car and in some cases will render the vehicle un-drivable.

Since the Reduced Power light can trigger for a number of different reasons, tracking down the exact cause is extremely important, if the vehicle is not properly diagnosed and repaired, the Reduced Power light will trigger again, putting the vehicle in safe mode.

How this system works:

When the vehicle’s computer detects a fault in the engine that affects its drivability, performance, transmission or emission system it will trigger the reduced power light. It will also trigger if there is an issue with the electronic throttle, the accelerator pedal or the throttle module.

When a vehicle goes into reduced power mode it will seriously impact its performance. Some vehicle will be restricted to idle speed while others restrict speed to 20-30 miles per hour. The Reduced Power trigger will save Diagnostic Trouble Codes (DTCs), which will indicate where the fault occurred. In most cases, a Restricted Power light is related to a throttle body or the connector.

Common reasons for this to happen:

  • Faulty Throttle Body: A throttle body is part of the of the air intake system which helps control the amount of air going into the engine. If a throttle body is failing the engine will not get the correct mixture of air and fuel. This can trigger the Reduced Power light as well as lead to a poor running engine. It can also trigger the Check Engine light.

  • Failing Throttle Position Sensor: The throttle position sensor tells the vehicle computer the position of the gas pedal. The computer uses this information to calculate the proper amount of air and fuel to send to the engine. The throttle position sensor also controls shifting the gears of a vehicle, which means that a faulty throttle position sensor will prevent a car from changing gears. If this part is failing, the Reduced Power light will trigger.

  • Faulty Engine Control Unit: The engine control unit is an essential component of a vehicles computer. It regulates and controls many systems, including the drive train and parts of the engine. If a fault is detected in this crucial part, it can trigger the Reduced Power light as well as the Check Engine light. This is a major issue that should be investigated as soon as possible.

  • Faulty Wiring: Exposed or damaged wires can cause issues with the any of these components and will possibly trigger the Reduced Power light. A loose wiring crimp can also be the culprit. Wiring issues can be tricky to track down so using a professional mechanic is a necessity.

  • Malfunctioning Oxygen Sensors: Oxygen sensors are responsible for measuring how rich or lean exhaust gases are leaving a vehicles combustion chamber. The vehicle’s computer uses this information to constantly adjust the amount of fuel going into the engine. A failing or dirty sensor can put too much or too little fuel into the engine. While a failing oxygen sensor will usually trigger a Check Engine light it is possible that the Reduced Power light could also trigger.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the Reduced Power light issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your vehicle's air intake system, electrical wiring and sensors, including the throttle body and oxygen sensors, along with other important components. It may be necessary for the mechanic to test drive the car to verify the complaint and provide an accurate diagnosis.

How important is this service?

The Reduced Power light only illuminates if there is a serious issue with the vehicle that must be addressed immediately. In almost all cases, the throttle or the vehicles computer will be malfunctioning which can make driving the vehicle dangerous. While it varies by manufacturer, most vehicles that go into “safe mode” will stay there until the error codes are read by a code scanner.

If the vehicle Reduced Power light illuminates the vehicle should immediately be inspected, diagnosed and repaired.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(21,238)

Rating Summary
19,961
688
130
106
353
19,961
688
130
106
353

Stephen

33 years of experience
220 reviews
Stephen
33 years of experience
Ford F-350 Super Duty V8-6.4L Turbo Diesel - Reduced Power light is on - Arvada, Colorado
Knew exactly the problem very professional

Wayne

24 years of experience
65 reviews
Wayne
24 years of experience
Ford F-250 V8-7.5L - Starter - Lake Stevens, Washington
Wayne was on time and was very efficient at getting the starter out. It was in a very tight spot. He got it out and in in no time.

Kwante

13 years of experience
65 reviews
Kwante
13 years of experience
Ford E-250 V8-4.6L - Brake Pads Replacement (Front) - Brooklyn, Maryland
Very professional very happy with work and would recommend him

Carzell

19 years of experience
42 reviews
Carzell
19 years of experience
Ford Focus L4-2.0L - Power door locks are not working - Memphis, Tennessee
He did a good job evaluating the problem and recommending a solution.

Excellent Rating

(21,238)

Rating Summary
19,961
688
130
106
353
19,961
688
130
106
353
Number of Ford services completed
233618+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

How to Prepare for the Delaware Driver’s Written Test
It’s It’s almost time to learn how to drive, but before you can get on the road and practice, you need to have a driver’s permit. In order to get the permit, you need to take a written exam at...
Veteran and Military Driver Laws and Benefits in Tennessee
The The state of Tennessee offers several important benefits for both current military service personnel and veterans. These range from the ability to make your driver’s license “expiration proof” for current service members to specialty honor plates for veterans and...
C1095 OBD-II Trouble Code: ABS Hydraulic Pump Motor Circuit Failure
Trouble code C1095 means the ABS hydraulic pump motor circuit has failed, often because of a damaged wheel speed sensor or wheel bearings.

Security light on, new key fob cannot be programed

Hello. Your key fob needs to be programmed to your car for it to work. There are a couple of ways this can be done. You could take the key fobs back to the dealership and have them program them...

Rear right turn signal/brake light not flashing properly

Hello there, thank you for asking about your 2003 Ford Mustang. The bulb is a dual filament bulb. One filament is for tail lights and the other for brake lights. I recommend removing and replacing the bulb first, then see...

My driver side lights are dimmer than my passenger side.

Hello: When you turn on the headlight switch, power is sent from the battery/alternator to the bulbs, causing the filaments to heat up and glow, which produces the light you need to see the road. Headlights are similar in many...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com