Ford E-250 Econoline Valve cover gasket is leaking Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(53)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(53)

Valve cover gasket is leaking Inspection Service

How much does a Valve cover gasket is leaking Inspection cost?

On average, the cost for a Ford E-250 Econoline Valve cover gasket is leaking Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Ford E-250 EconolineV8-5.0LService typeValve cover gasket is leaking InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1987 Ford E-250 EconolineL6-4.9LService typeValve cover gasket is leaking InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1999 Ford E-250 EconolineV6-4.2LService typeValve cover gasket is leaking InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1980 Ford E-250 EconolineV8-7.5LService typeValve cover gasket is leaking InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1997 Ford E-250 EconolineV8-5.4LService typeValve cover gasket is leaking InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1980 Ford E-250 EconolineV8-5.0LService typeValve cover gasket is leaking InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1989 Ford E-250 EconolineV8-5.8LService typeValve cover gasket is leaking InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1995 Ford E-250 EconolineV8-5.8LService typeValve cover gasket is leaking InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Ford E-250 Econoline Valve cover gasket is leaking Inspection prices

Typically made from rubber or cork, a valve cover gasket helps seal the gap between the valve cover and the top of the engine. When this gasket is in place, it prevents oil from leaking out onto the outside of the engine. Because of the tremendous heat produced by an engine, valve cover gaskets may break down over time, causing leaks.

How this system works:

The engine valve cover is typically the topmost part of an engine and is marked with either the name of the manufacturer or the size of the engine. A valve cover gasket is put in place because the metal of the valve cover does not seal tightly enough against the metal of the top of the engine. The rubber or cork material of the valve cover gasket ensures a good seal, and helps prevent oil from spilling out of the top of the engine.

Valve cover gaskets do not typically last the life of a vehicle and should be monitored at the time of every service. Checking for oil around the valve cover is especially important for vehicles with four-cylinder engines because of an increased chance that oil could spill into spark plug tubes, causing misfires.

Oil leaks can cause damage to any engine and should be dealt with immediately.

Common reasons for this to happen:

  • Blown Valve Cover Gaskets: The tremendous heat an engine produces can cause valve cover gaskets to become brittle and break down over time.

  • Damaged Valve Covers: When replacing your valve cover gasket, a mechanic should also examine your valve cover(s) to make sure they are still intact. Damage to a valve cover could also cause an oil leak.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the cause of the oil leak and make sure the valve cover gasket needs to be replaced. The mechanic will then provide a detailed inspection report outlining the cause of the leak and the cost of any repairs that need to be made.

How it's done:

A mechanic will perform a thorough inspection of the engine bay and determine the source of the leak. If the source seems to be coming from the valve cover gasket, the mechanic will remove the valve cover and gasket. Different engines require different gaskets. Our mechanics will make sure they find the one that fits your vehicle exactly. A poorly-fitting gasket will not be able to do its job as effectively.

After installing the new gasket, the mechanic will examine the valve cover to make sure it is fully intact. If not, the mechanic will replace the valve cover and check the engine oil level. If your engine sprung an oil leak due to a damaged valve cover, your vehicle might be low on oil. Our mechanics will make sure your oil is topped-off before they leave. The mechanic should then start the engine and examine the valve cover gasket again to make sure it was installed properly and is not leaking.

How important is this service?

While a small oil leak may not seem like a major issue, it can lead to both potentially dangerous and potentially costly repairs. A proactive approach to maintaining the life of an engine should include a check for oil around the valve cover. If oil leaks are discovered early, a mechanic can make the necessary repairs and avoid more significant engine issues. Oil leaks of any kind should be taken seriously and should be reported to a mechanic.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(53)

Rating Summary
43
4
1
0
5
43
4
1
0
5

James

31 years of experience
694 reviews
James
31 years of experience
Ford E-250 Econoline V8-5.4L - Brakes, Steering and Suspension Inspection - Brea, California
Top bloke! Very informative.

Robert

13 years of experience
10 reviews
Robert
13 years of experience
Ford E-250 Econoline V8-5.0L - Car is not starting - Stockton, California
He's a pro. I'm glad I got to meet him.

Michael

16 years of experience
606 reviews
Michael
16 years of experience
Ford E-250 Econoline V8-5.8L - Check Engine Light is on - Acworth, Georgia
Did not finish job. Van still not operable

Dia

32 years of experience
84 reviews
Dia
32 years of experience
Ford E-250 Econoline V8-5.8L - serpentine Belt - Forest Park, Georgia
VERY HONEST KNEW HIS STUFF AND DID GREAT JOB. HOPE TO GET DIA EVERYTIME I NEED SERVICE. THANK YOU

Excellent Rating

(53)

Rating Summary
43
4
1
0
5
43
4
1
0
5
Number of Ford E-250 Econoline services completed
583+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

What Metal Is the Exhaust System Made From?
Exhaust Exhaust systems must be made from metal to provide the required durability and resistance to heating, cooling and exposure to the elements. However, there are many different types of metals (and grades of individual metals). There are also differences...
How to Buy Good Quality Sensors
Sensors Sensors for autos have many of the same characteristics that other types of sensors do – they are created to detect a signal, respond to chemical or physical variations such as distance or temperature. These signals are then converted...
C1104 OBD-II Trouble Code: Traction Control Active Lamp - Circuit Short to Battery
Trouble code C1104 means the Engine Control Unit (ECU) has registered a short circuit issue in the traction control lamp.

The brake pedal goes all the way to the floorboard

Hi. Your issue could very well be due to a faulty master cylinder (https://www.yourmechanic.com/services/brake-master-cylinder-replacement). A fault in those particular model master cylinders have been experienced by QX56 owners in which air will seep into the brake fluid through the master...

Clunk noise when hitting bumps or road irregularities

Check with your Chevrolet dealer regarding a recall (https://www.yourmechanic.com/article/what-to-do-if-your-car-is-recalled-by-jason-unrau) (Chevy #15386 (http://gm.oemdtc.com/3861/15386-inner-tie-rod-not-torqued-to-specification-2014-2015-chevrolet-cruze-2014-chevrolet-volt/5)) regarding a loose tie rod end on some models of Volt for your model year. This would definitely cause a clunk under the conditions you describe, and is...

I put in a new starter and battery and my Jeep will not start. Please help me get my Jeep to start.

Hi there. Check to see if the wiring to the battery and the starter are tight and clean. A bad connection will cause a no start situation. If the battery cables (https://www.yourmechanic.com/services/service-battery-cables) and wires are all tight and clean, then...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com