Ford E-150 Econoline Brake Vacuum Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(108)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(108)

Brake Vacuum Pump Replacement Service

How much does a Brake Vacuum Pump Replacement cost?

On average, the cost for a Ford E-150 Econoline Brake Vacuum Pump Replacement is $391 with $296 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Ford E-150 EconolineV8-4.6LService typeBrake Vacuum Pump ReplacementEstimate$706.25Shop/Dealer Price$864.07 - $1315.01
1978 Ford E-150 EconolineL6-4.9LService typeBrake Vacuum Pump ReplacementEstimate$686.25Shop/Dealer Price$844.08 - $1295.04
1998 Ford E-150 EconolineV6-4.2LService typeBrake Vacuum Pump ReplacementEstimate$686.25Shop/Dealer Price$844.08 - $1295.04
1977 Ford E-150 EconolineV8-5.8LService typeBrake Vacuum Pump ReplacementEstimate$686.25Shop/Dealer Price$844.06 - $1295.00
1999 Ford E-150 EconolineV6-4.2LService typeBrake Vacuum Pump ReplacementEstimate$686.25Shop/Dealer Price$844.10 - $1295.07
1998 Ford E-150 EconolineV8-5.4LService typeBrake Vacuum Pump ReplacementEstimate$686.25Shop/Dealer Price$844.08 - $1295.04
1975 Ford E-150 EconolineV8-5.0LService typeBrake Vacuum Pump ReplacementEstimate$691.25Shop/Dealer Price$848.95 - $1299.80
2001 Ford E-150 EconolineV8-4.6LService typeBrake Vacuum Pump ReplacementEstimate$691.25Shop/Dealer Price$849.32 - $1300.46
Show example Ford E-150 Econoline Brake Vacuum Pump Replacement prices

What is the Brake Vacuum Pump all about?

The brake booster is a device that helps enhance the effects of the hydraulic braking system in cars as a supplement to the primary braking mechanism. Each time you push the brake pedal, the force transfers to a rod. This rod passes through the brake booster and reaches the master cylinder. The pressure from the rod activates the master cylinder piston and works on the hydraulic braking systems.

The brake booster chamber contains a vacuum the engine creates. This chamber has two sections, separated vertically by way of a rubber diaphragm. When the brake pedal pushes the rod, a small amount of air is let into the chamber on the brake pedal side through a valve that also seals off the vacuum. This air pressure on one side of the diaphragm helps enhance the force of the brake.

However, in case of cars that have turbo charging or use diesel as fuel, the engine does not create the necessary vacuum. Thus, they need an additional brake booster vacuum pump to draw out the air and create the vacuum needed for the brake booster to function. Vehicles that typically run in locations of high altitude also need a brake booster vacuum pump.

The brake booster vacuum pump reduces dependency on the engine for the vacuum and can work independently of it. This device uses an electrical control circuit to work. It activates with a signal from the brake booster vacuum sensor that monitors the levels of the vacuum in the brake booster.

Keep in mind:

  • The brake booster vacuum pump should be able to maintain up to 18” of vacuum for the brake booster to be effective.
  • If you notice that the pedal has slipped to the floor of the car and you hear a hissing sound, this could be an indication of a leak in the air line or pump to the brake booster vacuum pump.

How it's done:

  • The battery is disconnected. The faulty brake booster vacuum pump is located and identified. The vehicle is raised and supported on jack stands as needed. The engine under shield is removed for access.

  • The brake booster vacuum pump hoses and electrical connector are disconnected. The brake booster vacuum pump is removed from the mounting bracket.

  • The new brake booster vacuum pump is installed onto the mounting bracket. The hoses and electrical connector are installed to the new brake booster vacuum pump. The battery is reconnected.

  • The brakes are tested for proper brake booster vacuum pump operation. The engine shield is reinstalled. The vehicle is removed from the jack stands.

  • The vehicle is road tested and checked for proper brake booster vacuum pump and brakes operation.

Our recommendation:

If you notice the brakes are not responding as they should, book an appointment with one of our expert mechanics and have the brake booster system completely inspected. The mechanic will check the brake booster vacuum pump for damage and advise you if it needs replacing. Refer to the owner’s manual for recommendations on the frequency in which you must have the brake booster vacuum pump replaced.

What common symptoms indicate you may need to replace the Brake Vacuum Pump?

  • Delayed brake response
  • Excessive pressure is needed to make the brake respond
  • A hissing sound when you press the brake pedal
  • Brake pedal slips to the floor of the car when the engine is running and the car is stationary
  • Braking becomes especially difficult in heavy traffic areas when the brakes need to be applied in quick succession

How important is this service?

A malfunctioning brake booster vacuum pump will not create the adequate vacuum needed for the brake boosters or power brakes to function. This undermines the effectiveness of your brakes and can be a safety hazard.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(108)

Rating Summary
95
4
2
2
5
95
4
2
2
5

John

27 years of experience
1057 reviews
John
27 years of experience
Ford E-150 Econoline V8-4.6L - Check Engine Light is on - Friendswood, Texas
An excellent, competent mechanic.

Bryant

12 years of experience
622 reviews
Bryant
12 years of experience
Ford E-150 Econoline V6-4.2L - Oil Change - Plainfield, Indiana
Great, fast oil change. Didn't wait in line. Thx Bryant.

John

27 years of experience
1057 reviews
John
27 years of experience
Ford E-150 Econoline V8-5.4L - Parking brake won't release - Friendswood, Texas
Excellent work!

Jose

10 years of experience
285 reviews
Jose
10 years of experience
Ford E-150 Econoline V8-5.0L - Crankshaft Harmonic Balancer - Tampa, Florida
Excellent job and mechanic I would use him for any other work I might have<<<GARY HELGESON

Excellent Rating

(108)

Rating Summary
95
4
2
2
5
95
4
2
2
5
Number of Ford E-150 Econoline services completed
1188+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

How Long Does a Power Steering Control Valve Last?
Power Power steering is a wonderful thing – it makes maneuvering your car much simpler than if you were stuck with manual steering. Fluid-based power steering systems are the most common today, although electronic systems are beginning to make headway....
P0133: OBD-II Trouble Code: O2 Sensor Circuit Slow Response (Bank 1 Sensor 1)
P0133 Trouble code definition P0133 O2 Sensor Circuit Slow Response What the P0133 code means Bank 1 Sensor 1 is a sensor...
How to Replace a Car Window Motor/Window Regulator Assembly
Car window motors and regulators move car windows up and down. If the car window regulator assembly fails, the window will automatically drop down.

Brakes don't work properly. Hard to push - 1960 Jeep CJ5

Since you do not have power brakes, a clogged hose line or fitting may be the cause or a sticking/binding caliper (https://www.yourmechanic.com/services/brake-caliper-replacement) may be the issue. You may want to enlist the help of a mechanic, such as one from...

How to replace seat belt chime? 2017 Toyota RAV4 XLE

Hello - there will be a small plastic cube under the dash which is the "beeper" module. Remove an knee pad to access this area, and both by sound and vibration, with the key in the "Run" position (seatbelt unfastened)...

Second Opinion] what fuse controls the fan that blows hot or cold air into my car. the heating and cooling works but no air is coming through Hyundai [accent](/topics-accent/) 2011

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com