Ford Crown Victoria Battery will not hold a charge Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(221)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(221)

Battery will not hold a charge Inspection Service

How much does a Battery will not hold a charge Inspection cost?

On average, the cost for a Ford Crown Victoria Battery will not hold a charge Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Ford Crown VictoriaV8-4.6LService typeBattery will not hold a charge InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1992 Ford Crown VictoriaV8-4.6LService typeBattery will not hold a charge InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2009 Ford Crown VictoriaV8-4.6LService typeBattery will not hold a charge InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2004 Ford Crown VictoriaV8-4.6LService typeBattery will not hold a charge InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2007 Ford Crown VictoriaV8-4.6LService typeBattery will not hold a charge InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2008 Ford Crown VictoriaV8-4.6LService typeBattery will not hold a charge InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1999 Ford Crown VictoriaV8-4.6LService typeBattery will not hold a charge InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2005 Ford Crown VictoriaV8-4.6LService typeBattery will not hold a charge InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Ford Crown Victoria Battery will not hold a charge Inspection prices

Your car has a battery for a very good reason – it provides the initial power needed to crank the engine and get the car running. After that, the alternator takes over, providing the power for your accessories, as well as recharging the battery. If your battery has died and then recharged, and you’ve found that it will not hold a charge (the battery is fine for a little while, but then the charge dissipates), there’s a problem somewhere in your system that must be diagnosed and repaired.

How this system works:

In a normal system, it works like this: Your battery supplies power to the starter and the main relay. The main relay powers the fuel pump and computer. The battery also supplies the initial electric spark to the spark plugs. Once the engine is cranked, the alternator begins turning, which generates the electricity necessary to recharge the battery and to power the engine and other components.

The alternator should always provide enough electricity to recharge the battery and power your other components. If it does not, then the electricity needed comes from the battery and because it’s not being recharged, it will eventually die. Of course, automotive batteries have a limited lifespan – they should be checked regularly after they’re about three years of age (although it’s wise to have them checked at least twice a year no matter how new they might be).

If your battery won’t hold a charge, it means there are problems within the system that are either preventing the battery from being recharged, or draining the battery when the engine is off.

Common reasons for this to happen:

  • Bad Cell: Batteries will eventually die no matter what. They will develop a bad cell that prevents them from holding a charge and will need to be replaced. This is part of normal vehicle maintenance. Have your battery tested every Spring and Fall to ensure that you’re able to avoid being stranded by a failed battery. Batteries most commonly “die” during hot and cold weather.

  • Low Water: Some batteries have fill holes that allow you to maintain them, although most modern batteries are maintenance free and don’t allow you to add water. If you have a maintainable battery, topping off the water level may solve the problem.

  • Bad Alternator: If the alternator is not charging the battery while the engine operates, the battery will not hold a charge. This is most noticeable if you jump the battery and the engine runs for a while, only to eventually die. It is also observable by watching your headlights – while the engine is running, check the lights. If they start bright but slowly fade, chances are good that the problem is the alternator, not the battery.

  • Corroded Battery Cables: Battery cables and terminals can suffer from corrosion. As it builds up, this corrosion prevents solid contact, and can limit the charge being supplied to the battery from the alternator. Regular maintenance of your battery can prevent this.

  • Loose Alternator Belt: If the alternator belt is loose (old and stretched), it will not operate the alternator properly, which means that the charge the alternator produces may not be enough to recharge the battery.

  • Parasitic Drain: It might be that your battery and alternator are just fine, but there’s something else draining the charge. This could be something as simple as leaving the lights on, or having an accessory plugged in to an “always on” power outlet, or it could be a stuck relay or something else that’s pulling power from the battery when the engine isn’t running.

What to expect:

A top-rated mobile mechanic will come to your office, home or other location to inspect the battery, the alternator and other components of the charging system. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will test your battery, alternator and starter. The mechanic will also check for parasitic drain and other problems that might make your battery not hold a charge. It may be necessary to replace your battery in order to diagnose other system-wide problems (if the battery has developed a bad cell).

How important is this service?

If your battery won’t hold a charge, it’s not safe to drive your car. Even if your alternator is working fine, turning the car off for something as simple as stopping at the gas station will mean that the engine won’t crank and you’ll need to jump it off. One of our top-rated mechanics can diagnose the problem and get you back up and running.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(221)

Rating Summary
206
9
2
1
3
206
9
2
1
3

Damian

11 years of experience
465 reviews
Damian
11 years of experience
Ford Crown Victoria V8-4.6L - Battery will not hold a charge - Washington, District of Columbia
A fresh set of eyes, a confident attitude, and a thorough understanding is what you get with Dante. Very knowledgeable and smart.

Jamahl

20 years of experience
830 reviews
Jamahl
20 years of experience
Ford Crown Victoria V8-4.6L - Check Engine Light is on - Casselberry, Florida
I was very pleased with jamahl. He does good work and I recommend him.

Maxwell

18 years of experience
390 reviews
Maxwell
18 years of experience
Ford Crown Victoria V8-4.6L - Starter - Spring, Texas
First time I've used this kind of service so I was a little skeptical, but I was very impressed with the whole process and extremely satisfied with Maxwell. In my particular case, he was the key ingredient to the whole process. Without the final step of the process (fixing my car) being done efficiently, the initial part of the process, as good as it may be, is irrelevant. I would most definitely recommend Mr Maxwell and his company to anybody I run across in need of a good mechanic.

Gustavo

17 years of experience
400 reviews
Gustavo
17 years of experience
Ford Crown Victoria V8-4.6L - Strut Assembly Replacement (Front) - San Marcos, Texas
Mr. Gonzales was more detailed in his assessment of the vehicle. He explained step by step his process, and what needed to be and how it needed to be done. Mr. Gonzales found other issues that should have been reported by the first mechanic which caused additional expense to us on this trip. His behavior and attitude was above expectation and he arrives early to start the process and moved expeditiously to complete the job without hindrance or confusion.

Excellent Rating

(221)

Rating Summary
206
9
2
1
3
206
9
2
1
3
Number of Ford Crown Victoria services completed
2431+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

Top 10 Scenic Drives in Kansas
There’s a reason why Dorothy said, “There’s no place like home.” There really isn’t any other state quite like Kansas. Its terrain is incredibly open, whether in flat prairies or rolling hills; it just seems to stretch into forever. While...
I Hit the Brakes Very Hard. Did I Create a Flat Spot on My Tires?
Almost Almost everyone, at some point in his or her driving experience, will slam on the brakes. Slamming on the brakes is generally more than just an emotional response to a situation. When you're avoiding an accident or reacting to...
P0881 OBD-II Trouble Code: Traction Control Module (TCM) Power Input Signal Range/Performance
P0881 means the traction control module is not working properly, possibly due to a faulty ON/OFF switch or damaged electrical components.

Problem with air suspension.

The front air bags or air lines may have a leak or the height sensor is defective. The most likely cause is the height sensor is defective.

How do you fix p0365 on a 04 bmw 545i?i just put a new sensor from the dealer and my car is still acting up.?

P0365 refers to an open circuit on the camshaft position sensor on bank 1. It means the circuit for the sensor is incomplete. that could be a bad sensor, or it could be a bad connector,wire, ground or ECU.Since you've...

Should the rpm drop to zero while sitting idle with the engine on

On these type of issues where the cluster sometimes do erratic things you can do a battery cable reset by disconnecting the battery cables and touching them together for three minutes and then reconnecting them to the battery. When you...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com