Dodge Ram 3500 Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(49)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(49)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Dodge Ram 3500 Car Battery Replacement is $308 with $168 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Dodge Ram 3500V8-5.7LService typeCar Battery ReplacementEstimate$491.20Shop/Dealer Price$578.85 - $833.70
1997 Dodge Ram 3500V10-8.0LService typeCar Battery ReplacementEstimate$513.15Shop/Dealer Price$606.77 - $883.52
1997 Dodge Ram 3500L6-5.9L Turbo DieselService typeCar Battery ReplacementEstimate$513.15Shop/Dealer Price$606.80 - $883.56
1999 Dodge Ram 3500L6-5.9L Turbo DieselService typeCar Battery ReplacementEstimate$513.15Shop/Dealer Price$606.80 - $883.56
2002 Dodge Ram 3500V10-8.0LService typeCar Battery ReplacementEstimate$513.15Shop/Dealer Price$608.27 - $886.14
2003 Dodge Ram 3500V10-8.0LService typeCar Battery ReplacementEstimate$482.19Shop/Dealer Price$568.24 - $821.89
1994 Dodge Ram 3500L6-5.9L Turbo DieselService typeCar Battery ReplacementEstimate$513.15Shop/Dealer Price$606.81 - $883.59
2003 Dodge Ram 3500V8-5.7LService typeCar Battery ReplacementEstimate$482.19Shop/Dealer Price$568.10 - $821.64
Show example Dodge Ram 3500 Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(49)

Rating Summary
46
3
0
0
0
46
3
0
0
0

Wesley

7 years of experience
83 reviews
Wesley
7 years of experience
Ram 3500 2003 - Battery is dead - Scottsdale, AZ
Great mechanic!

Stephen

28 years of experience
132 reviews
Stephen
28 years of experience
Ram 3500 2006 - Battery will not hold a charge - Denver, CO
I am glad Stephen explain what he was doing in the wind made some suggestions asked questions .done everything that is needed to be done.

Phillip

16 years of experience
307 reviews
Phillip
16 years of experience
Ram 3500 2000 - Spark Plugs - Sacramento, CA
He is a very professional about doing the job correctly !! I was very honored to have an honest professional work on my vehicle thank u phillip

Joseph

0 years of experience
646 reviews
Joseph
0 years of experience
Ram 3500 2001 - Water Pump - Sandy, UT
A+ Great Technician knows what it takes to diagnose and fix Cars and Trucks thanks Joseph

Excellent Rating

(49)

Rating Summary
46
3
0
0
0
46
3
0
0
0
Number of Dodge Ram 3500 services completed
539+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

P0960 OBD-II Trouble Code: Pressure Control Solenoid A Control Circuit/Open
P0960 P0960 code definition The P0960 code is a generic powertrain code related to the transmission, including pressure faults and sensor failures. In this case, the engine control module (ECM) has received a signal noting that the pressure control solenoid...
P0204 OBD-II Trouble Code: Injector Circuit Malfunction - Cylinder 4
P0204 code definition Injector Circuit Malfunction - Cylinder 4 What the P0204 code means The Engine Control Module (ECM) runs checks on...
Rules of the Road For Hawaii Drivers
While While you may be comfortable with the rules for driving on the roads in your own state, they may not be the same when you go to another state. If you are planning on visiting or moving to Hawaii,...

Odometer malfunctioning, ABS light on constantly

On the Volvo 850, there is a plastic gear on the odometer/trip meter unit inside the instrument cluster that is known to wear out. The instrument cluster will have to be removed, disassembled, and the gear replaced to correct the...

Engine stalls when put into gear

Hello. Engine stalling can be caused by a wide variety of issues. Anything from transmission issues, fuel problems, to wiring problems can all cause an engine to stall when put into gear. If you recently rebuilt the transmission it may...

93 Buick will not excelerate passed 30 put in new transmission hose and radiator. Can u please tell me what u think the problem is

Hi there. In some cases, when you have acceleration problems after changing a transmission hose, the issue is related to either an obstruction in the transmission fluid lines or the torque converter not receiving or having enough transmission fluid (slipping)....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com