Dodge Ram 1500 Van Valve Cover Gasket Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Dodge Ram 1500 Van Valve Cover Gasket Replacement is $190 with $50 for parts and $140 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2000 Dodge Ram 1500 VanV8-5.9L	Service typeValve Cover Gasket Replacement	Estimate$271.78	Shop/Dealer Price$304.58 - $394.86
2003 Dodge Ram 1500 VanV8-5.9L	Service typeValve Cover Gasket Replacement	Estimate$262.77	Shop/Dealer Price$293.80 - $382.76
2000 Dodge Ram 1500 VanV6-3.9L	Service typeValve Cover Gasket Replacement	Estimate$246.21	Shop/Dealer Price$273.12 - $349.68
1999 Dodge Ram 1500 VanV8-5.9L	Service typeValve Cover Gasket Replacement	Estimate$321.17	Shop/Dealer Price$352.96 - $442.50
2002 Dodge Ram 1500 VanV8-5.9L	Service typeValve Cover Gasket Replacement	Estimate$262.77	Shop/Dealer Price$295.30 - $385.38
2000 Dodge Ram 1500 VanV8-5.2L	Service typeValve Cover Gasket Replacement	Estimate$306.57	Shop/Dealer Price$338.36 - $427.89
2001 Dodge Ram 1500 VanV6-3.9L	Service typeValve Cover Gasket Replacement	Estimate$246.21	Shop/Dealer Price$273.14 - $349.71
2003 Dodge Ram 1500 VanV6-3.9L	Service typeValve Cover Gasket Replacement	Estimate$246.21	Shop/Dealer Price$273.12 - $349.68

Show example Dodge Ram 1500 Van Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(48)

Rating Summary

45

0

1

1

1

45

0

1

1

1

SEE REVIEWS NEAR ME

Moses

21 years of experience

30 reviews

Moses

21 years of experience

by Olivia

Dodge Ram 1500 Van V8-5.9L - Valve Cover Gasket - Litchfield Park, Arizona

Excellent communication and made the process simple and easy for me to understand

Mauricio

41 years of experience

85 reviews

Request Mauricio

Mauricio

41 years of experience

Request Mauricio

by David

Dodge Ram 1500 Van V8-5.9L - Water Pump - Burbank, California

Very friendly and professional. Dealt with the issues as they came up and performed the required tasks to complete the job to satisfaction.

Kelly

35 years of experience

173 reviews

Kelly

35 years of experience

by

Dodge Ram 1500 Van V8-5.2L - Brake Caliper Replacement (Driver Side Front, Passenger Side Front) - Charlotte, North Carolina

It was a very positive experience. He did a very thorough job.

Robert

21 years of experience

1307 reviews

Robert

21 years of experience

by Lisa

Dodge Ram 1500 Van V8-5.2L - Brake Shoes (Rear) - Arvada, Colorado

Robert was professional and educated. He executed the repair I requested swiftly.

Excellent Rating

(48)

Rating Summary

45

0

1

1

1

45

0

1

1

1

SEE REVIEWS NEAR ME

Recent articles & questions

How Drum Brakes Work

Car drum brake systems include the drum, brake shoes, and wheel cylinder. The cylinder pushes the shoes into the drum to slow or stop your car.

How to Register a Car in Ohio

Are Are you new to the state of Ohio? If you answered yes, then you will need to take the time to make sure you get your car registered. In order to drive on the Ohio roadways legally, you have...

5 Tips for Taking Care of Your Car Windows

Driving Driving a new car is an exhilarating experience and the scenery, storefronts, and pedestrians look great through your new windows. Over the next weeks, months, and years, however, the scenery doesn’t look quite as sharp. The sun catches and...

How do I use the steering wheel to adjust the volume?

The steering wheel volume switches are located on the back of the steering wheel, on the right side. Using your right hand, feel behind the steering wheel for the volume switches. Press the top of the switch to increase the...

Jeep Wrangler no crank no start

Hi there: There are some very rare instances where an ABS sensor failure will trigger an OBD-II error code that disables the ignition timing system until it's repaired. However, more times than not, a no starting issue is caused by...

My car is coming up with a P2179 code and I'm about 300km from home I just want to know if it is safe to drive for the mean time

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com