Dodge B350 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(17)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(17)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Dodge B350 Fuel Injector Replacement is $914 with $774 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Dodge B350V8-5.2LService typeFuel Injector ReplacementEstimate$1703.04Shop/Dealer Price$2093.65 - $3257.38
1994 Dodge B350V8-5.9LService typeFuel Injector ReplacementEstimate$2052.43Shop/Dealer Price$2530.87 - $3962.08
1990 Dodge B350V8-5.9LService typeFuel Injector ReplacementEstimate$2597.25Shop/Dealer Price$3211.92 - $5051.76
1991 Dodge B350V8-5.2LService typeFuel Injector ReplacementEstimate$2466.21Shop/Dealer Price$3048.12 - $4789.68
1990 Dodge B350V8-5.2LService typeFuel Injector ReplacementEstimate$2463.59Shop/Dealer Price$3046.32 - $4787.02
1991 Dodge B350V8-5.9LService typeFuel Injector ReplacementEstimate$2597.25Shop/Dealer Price$3212.06 - $5052.01
1994 Dodge B350V8-5.2LService typeFuel Injector ReplacementEstimate$2052.43Shop/Dealer Price$2530.91 - $3962.15
1993 Dodge B350V8-5.2LService typeFuel Injector ReplacementEstimate$1694.03Shop/Dealer Price$2082.90 - $3245.32
Show example Dodge B350 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(17)

Rating Summary
16
0
1
0
0
16
0
1
0
0

Chris

17 years of experience
419 reviews
Chris
17 years of experience
Dodge B350 V8-5.9L - Starter - South San Francisco, California
Chris did an excellent job. Showed up on time, with the proper parts and did a great job.

William

35 years of experience
731 reviews
William
35 years of experience
Dodge B350 V8-5.9L - Car is not starting - Glendale, Arizona
I'm so grateful for William for be able to fix my Big Bertha a 1986 B350 Dodge extra van. It is not easy to find a mechanic knowledgeable in 1986 cars. He was quick to find the problem and fix it. Gave us some tips to help keep it in shape. So happy I found Your Mechanic.com. I will use then for now on, for sure and I have already recommend then in my hair salon and you too in my FB page.

Patrick

34 years of experience
1579 reviews
Patrick
34 years of experience
Dodge B350 V8-5.2L - Car starts and then dies - Austin, Texas
Patrick was friendly and knowledgeable. He showed up on time, communicated what my vehicle needs and I would absolutely use him again!

Patrick

16 years of experience
406 reviews
Patrick
16 years of experience
Dodge B350 V8-5.2L - Car is not starting - Petersburg, Virginia
Great professional.

Excellent Rating

(17)

Rating Summary
16
0
1
0
0
16
0
1
0
0
Number of Dodge B350 services completed
187+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Cooling Fan Resistor
Common signs include the engine overheating, cooling fan only working at certain speeds, and the fan never turning off.
Symptoms of a Bad or Failing Exhaust Manifold Gasket
If the engine is noisy, causing performance issues, or smells burnt, you may need to replace the exhaust manifold gasket.
The Best Used Cars to Buy for Long Commutes
Most Most of us are faced with the prospect of commuting back and forth to work on a daily basis, but some have a much longer drive than others. When it comes time to buy a car, you need to...

How to remove a stripped lug

In order to get lug nuts that have stripped out you will need to have the lug nut removed by using special stripped lug nut socket. The socket has special locking knobs inside that will grip onto the stripped nut...

Smoke coming out of the vents into the cabin compartment.

Hi there. The green ooze that you saw was indeed coolant. The issue could be the heater core hoses or heater control valve is leaking coolant and the ventilation system on your air conditioning system to the open air outside...

03 ford focus zx5 Broke key off in igntion. Dont hav spare

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com