Dodge Avenger Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(674)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(674)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Dodge Avenger Fuel Injector Replacement is $498 with $358 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Dodge AvengerL4-2.4LService typeFuel Injector ReplacementEstimate$873.28Shop/Dealer Price$1056.45 - $1597.86
2010 Dodge AvengerL4-2.4LService typeFuel Injector ReplacementEstimate$864.27Shop/Dealer Price$1045.67 - $1585.76
2013 Dodge AvengerV6-3.6LService typeFuel Injector ReplacementEstimate$1831.59Shop/Dealer Price$2251.38 - $3506.17
2014 Dodge AvengerV6-3.6LService typeFuel Injector ReplacementEstimate$1831.59Shop/Dealer Price$2251.38 - $3506.16
2009 Dodge AvengerV6-3.5LService typeFuel Injector ReplacementEstimate$1547.51Shop/Dealer Price$1848.16 - $2730.61
1999 Dodge AvengerL4-2.0LService typeFuel Injector ReplacementEstimate$1472.59Shop/Dealer Price$1806.24 - $2802.69
2011 Dodge AvengerV6-3.6LService typeFuel Injector ReplacementEstimate$1831.59Shop/Dealer Price$2251.40 - $3506.20
2008 Dodge AvengerV6-2.7LService typeFuel Injector ReplacementEstimate$1392.56Shop/Dealer Price$1678.35 - $2528.19
Show example Dodge Avenger Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(674)

Rating Summary
646
12
2
4
10
646
12
2
4
10

William

14 years of experience
95 reviews
William
14 years of experience
Avenger 2013 - Battery Light is on - Denver, CO
He explained the problem extremely well and made us laugh along the way, would definitely be asking for his service again

Mazyar

5 years of experience
372 reviews
Mazyar
5 years of experience
Avenger 2010 - Tune-up - Griffin, GA
Was prompt, courteous and performed the job as expected.

Casey

18 years of experience
52 reviews
Casey
18 years of experience
Avenger 2013 - Lights (Headlamps/beams/brakes) - Katy, TX
Casey was was fast and efficient with all the experience he has an auto mechanics. I very much appreciate him and I appreciate y’all have that service to come to the house or the office anywhere that she did her assistant appreciate that thank you !!

Roberto

10 years of experience
223 reviews
Roberto
10 years of experience
Avenger 2010 - Crankshaft Position Sensor - Stafford, TX
Great job very professional and friendly

Excellent Rating

(674)

Rating Summary
646
12
2
4
10
646
12
2
4
10
Number of Dodge Avenger services completed
7414+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

B1970 OBD-II Trouble Code: Passenger Seatback Forward Switch Circuit Short to Ground
B1970 means there is an issue with the passenger seatback forward switch, likely due to a faulty switch or damaged electrical components.
How to Clean an EGR Valve
The The EGR valve is the heart of the emissions system on an engine. EGR is an acronym for Exhaust Gas Recirculation, and that is exactly what it does. This wonderful environmentally-friendly device opens up during certain engine conditions and...
How to Make Your Own Windshield Washer Fluid
It's easy to make windshield washer fluid with common ingredients. Homemade washer fluid can be more environmentally friendly than conventional fluid.

Car running rich

It can always be a challenge when addressing an issue with a classic car, such as with your 68’ Chevelle. Provided that your Chevy has not been modified, your problem may simply be found in the spark plugs. Each spark...

Alternator Fault

You will need to check the one way clutch pulley on the alternator to see if it operates as it should. First remove the belt. Then using a plastic or non conductive blade and put it in the alternator rotor...

Car starts but won't stay running

It sounds like you may have a dirty or failing idle air control valve. The idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) monitors the air intake as it is mixed with fuel prior to being injected into the engine at low speeds...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com