Chrysler Town & Country Fuel Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(14)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(14)

Fuel Pump Replacement Service

How much does a Fuel Pump Replacement cost?

On average, the cost for a Chrysler Town & Country Fuel Pump Replacement is $254 with $114 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Chrysler Town & CountryV6-3.3LService typeFuel Pump ReplacementEstimate$958.35Shop/Dealer Price$1080.19 - $1418.56
2012 Chrysler Town & CountryV6-3.6LService typeFuel Pump ReplacementEstimate$986.60Shop/Dealer Price$1158.72 - $1666.22
1999 Chrysler Town & CountryV6-3.8LService typeFuel Pump ReplacementEstimate$928.17Shop/Dealer Price$1044.17 - $1378.17
1996 Chrysler Town & CountryV6-3.8LService typeFuel Pump ReplacementEstimate$804.08Shop/Dealer Price$918.49 - $1251.30
2009 Chrysler Town & CountryV6-3.3LService typeFuel Pump ReplacementEstimate$1263.24Shop/Dealer Price$1507.74 - $2225.13
1998 Chrysler Town & CountryV6-3.8LService typeFuel Pump ReplacementEstimate$774.88Shop/Dealer Price$889.25 - $1222.02
2006 Chrysler Town & CountryV6-3.3LService typeFuel Pump ReplacementEstimate$572.74Shop/Dealer Price$644.95 - $852.92
2016 Chrysler Town & CountryV6-3.6LService typeFuel Pump ReplacementEstimate$1407.72Shop/Dealer Price$1685.17 - $2508.55
Show example Chrysler Town & Country Fuel Pump Replacement prices

What is the fuel pump and how does it work?

The fuel pump supplies pressurized gasoline to each of the fuel injectors in a car’s engine. The fuel pump is powered by a compact electric motor and is located in the vehicle’s gas tank. The pressure and output of the pump are controlled by a regulator. Filtration of the fuel occurs either in the fuel tank using a pickup screen or externally with a replaceable filter mounted in the fuel supply line.

When to consider replacing the fuel pump?

A high quality, OEM fuel pump can last indefinitely. However, as with any electro-mechanical component, a fuel pump will eventually degrade and fail. If it fails to produce adequate pressure or completely quits operating, it will need to be replaced. This failed condition can sometimes be preceded or accompanied by one or more of the following symptoms:

  • Car won’t start or unexpectedly stalls and won’t re-start. A failed fuel pump may prevent a car from starting or stall it.
  • Check engine light is on. Sometimes a fuel pump will fail slowly, and that means the fuel pressure and volume slowly degrades. The lack of fuel may result in the engine operating without enough fuel relative to the amount of air, causing the check engine light to appear.
  • Whirring noise from fuel tank. As a fuel pump fails, you may notice a whirring or humming noise coming from the fuel tank area, toward the rear of the car. If the noise is from the fuel pump, failure of the pump is often imminent and you should replace the fuel pump at your earliest convenience.

How do mechanics replace the fuel pump?

  • The fuel pump is tested to be sure it isn’t functioning.
  • Should the fuel pump be faulty, it is removed from the tank through an access panel above the tank in the passenger compartment.
  • When no access panel exists, fuel is first drained from the tank and then the fuel tank must be lowered from the vehicle to gain access to the pump.
  • In all cases, fuel pump supply and return hoses, as well as EVAP system hoses, and electrical connections to the pump must be removed.
  • Once the pump is out, any reusable brackets and pick up screens are attached to the new pump, then the new pump is installed.
  • If the fuel system uses an in-line external filter, a filter is often replaced. All hoses and electrical connections are re-established.
  • Fuel is added to the tank and the engine is run to test for leaks.

Is it safe to drive with a fuel pump problem?

Usually, it’s still safe to drive, but the pump may lead to an overheated engine and catalytic converter. Complete fuel pump failure can leave you stranded out on the road, but many times a car won’t start before initially driving.

However, if the fuel pump problem involves leaks of gasoline or vapors, it is unsafe to continue driving, and should immediately be checked by a qualified mechanic.

When replacing the fuel pump keep in mind:

  • Prior to replacing, the mechanic will power the fuel pump directly to confirm that the issue is a failed pump versus a faulty power supply to the pump.
  • Unless the fuel filter was replaced recently, whenever the fuel pump is replaced a new fuel filter should be installed.
  • When failing earlier than expected, the power supply should be verified because a voltage drop in the fuel pump circuit can lead to overheating.
  • Should the fuel tank be lowered during the repair, the fuel tank straps and fasteners should be checked for excessive corrosion and replaced as needed.
  • The fuel in the gas tank cools and lubricates the fuel pump. After installation of a new fuel pump, it’s wise to keep the gas tank at least a quarter full to maximize the life of a new fuel pump.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(14)

Rating Summary
13
1
0
0
0
13
1
0
0
0

Excellent Rating

(14)

Rating Summary
13
1
0
0
0
13
1
0
0
0
Number of Chrysler Town & Country Fuel Pump Replacement services completed
154+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

How to Get a Maryland Driver's Permit
Maryland Maryland is one of many states that uses a graduated driver's program, which requires new drivers to begin driving under supervision, in order to practice safe driving before getting their full driver’s license. In order to receive the initial...
P0095 OBD-II Trouble Code: Intake Air Temperature Sensor 2 Circuit
P0095 P0095 code definition Intake Air Temperature Sensor 2 Circuit What the P0095 code means The intake air temperature sensor transmits a signal correlating to the density of the air coming through the intake to the Engine Control Module (ECM)....
Symptoms of a Bad or Failing Oil Pump Cover Gasket
Common signs include oil leaking near the timing cover or intake manifold and lower than normal oil pressure.

Misfire under acceleration

First I would revisit the plugs and coils. there is always the possibility that something didn't hook up properly. Pay close attention to the ground wires. They are the brown wires that emerge from the harness at seeming random places...

Car starts after a few tries, but then dies as soon as I take my foot off gas pedal.

Clean any debris on the battery posts using a mixture of baking soda and water. Under your battery is a pedal that connects to the PCM. Make sure that it is pushed down hard so that your battery does not...

Blown head gasket for 8 months can I fix it or is it to late?

If the engine has a blown head gasket then you may have got coolant and water into the engine cylinders and inside the crankcase. Since it sat for a long period then you may have rust that built up inside...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com