Chrysler New Yorker Car Battery Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Chrysler New Yorker Car Battery Replacement is $300 with $160 for parts and $140 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
1995 Chrysler New YorkerV6-3.5L	Service typeCar Battery Replacement	Estimate$522.16	Shop/Dealer Price$617.55 - $895.62
1994 Chrysler New YorkerV6-3.5L	Service typeCar Battery Replacement	Estimate$513.15	Shop/Dealer Price$606.77 - $883.52
1991 Chrysler New YorkerV6-3.8L	Service typeCar Battery Replacement	Estimate$513.15	Shop/Dealer Price$606.80 - $883.56
1992 Chrysler New YorkerV6-3.8L	Service typeCar Battery Replacement	Estimate$513.15	Shop/Dealer Price$606.80 - $883.56
1993 Chrysler New YorkerV6-3.3L	Service typeCar Battery Replacement	Estimate$513.15	Shop/Dealer Price$608.27 - $886.14
1992 Chrysler New YorkerV6-3.3L	Service typeCar Battery Replacement	Estimate$513.15	Shop/Dealer Price$606.94 - $883.81
1990 Chrysler New YorkerV6-3.3L	Service typeCar Battery Replacement	Estimate$513.15	Shop/Dealer Price$606.81 - $883.59
1991 Chrysler New YorkerV6-3.3L	Service typeCar Battery Replacement	Estimate$513.15	Shop/Dealer Price$606.80 - $883.56

Show example Chrysler New Yorker Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(8)

Rating Summary

8

0

0

0

0

8

0

0

0

0

SEE REVIEWS NEAR ME

Brandon

26 years of experience

27 reviews

Request Brandon

Brandon

26 years of experience

Request Brandon

by scott

Chrysler New Yorker V6-3.3L - Alternator - Chandler, Arizona

showed up on time . replaced alternator on my 91 new Yorker. Car was in garage Brandon left everything clean and he was well organized.

Mike

27 years of experience

265 reviews

Mike

27 years of experience

by Terry

Chrysler New Yorker V8-7.2L - Intake Manifold Gaskets - Farmington, Michigan

Great to work with.

Noe

37 years of experience

604 reviews

Noe

37 years of experience

by Tim

Chrysler New Yorker V6-3.5L - Noise from engine or exhaust - Seattle, Washington

Arrived early and called me to ask if it was alright to start the work early and I said yes. When my wife had to get her car out of the garage, which was blocked by the vehicle he was working on he quickly picked up all his tools and moved the vehicle so my wife could get to her appointment. He couldn't fix either of the two vehicles he looked at because they needed to be looked at by a muffler shop with special welding tools which he knew he couldn't do, which was greatly appreciated versus trying to fix the vehicles and charge us for a temporary fix.

Benji

23 years of experience

309 reviews

Benji

23 years of experience

by Philip

Chrysler New Yorker V6-3.3L - Window Motor / Regulator Assembly Replacement (Passenger Side Front) - Chandler, Arizona

did the work quickly and professionally. Will want him back.

Excellent Rating

(8)

Rating Summary

8

0

0

0

0

8

0

0

0

0

SEE REVIEWS NEAR ME

Recent articles & questions

What Is the Difference Between a 4-Stroke and 2-Stroke Engine?

Four-stroke and two-stroke engines have similar components, but don't work the same way. Four-stroke engines are often found in off-road vehicles.

How to Transfer a Car Title in Arizona

Without Without a title, there is no proof that you own the car you’re driving. Whenever a car is bought or sold, the title must be transferred from the original owner to the new owner (the buyer). In the state...

A Buyer’s Guide to the 2012 Jaguar XF

The The Jaguar name alone represents luxury, performance and prestige in the world of high-end vehicles. The XF was completely retooled in 2009, a sign of the premium carmaker’s efforts to draw in younger consumers and attract a whole new...

Wire came off of starter

Hi, if this is a large diameter wire like a battery cable then it may be the cable to the starter terminal. If it is a smaller wire, it may be a memory wire for the engine controls and things...

replaced automatic transmission on 04 outback H6. All done, but no action from starter what so ever. Battery is fully charged.

Check for battery voltage to the push on terminal on the starter solenoid with the key held in the start position. If the heavy gauge starter positive cable has no voltage drop, and there is battery voltage to the solenoid...

My car drives good until I stop at a light or stop sign. It will not accelerate unless I put it in third gear. After thirt

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com