Chrysler LHS Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(30)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(30)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Chrysler LHS Front Crankshaft Seal Replacement is $717 with $339 for parts and $378 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Chrysler LHSV6-3.5LService typeFront Crankshaft Seal ReplacementEstimate$1202.78Shop/Dealer Price$1398.03 - $1959.46
2000 Chrysler LHSV6-3.5LService typeFront Crankshaft Seal ReplacementEstimate$1321.11Shop/Dealer Price$1557.80 - $2256.72
1999 Chrysler LHSV6-3.5LService typeFront Crankshaft Seal ReplacementEstimate$1321.11Shop/Dealer Price$1557.87 - $2256.84
2001 Chrysler LHSV6-3.5LService typeFront Crankshaft Seal ReplacementEstimate$1321.11Shop/Dealer Price$1557.86 - $2256.83
1997 Chrysler LHSV6-3.5LService typeFront Crankshaft Seal ReplacementEstimate$1175.75Shop/Dealer Price$1370.19 - $1931.02
1995 Chrysler LHSV6-3.5LService typeFront Crankshaft Seal ReplacementEstimate$1175.75Shop/Dealer Price$1366.19 - $1924.02
1994 Chrysler LHSV6-3.5LService typeFront Crankshaft Seal ReplacementEstimate$1116.13Shop/Dealer Price$1291.29 - $1804.13
Show example Chrysler LHS Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(30)

Rating Summary
27
1
1
0
1
27
1
1
0
1

Jeffrey

28 years of experience
870 reviews
Jeffrey
28 years of experience
Chrysler LHS V6-3.5L - AC is not working - Fort Mill, South Carolina
Jeff did a thorough examination of the issue, as well as other potential issues the car had. I will be having him back to do repairs on some of the other problems in a few weeks!

Patrick

34 years of experience
1579 reviews
Patrick
34 years of experience
Chrysler LHS V6-3.5L - Car Thermostat Replacement - Austin, Texas

Behrak

10 years of experience
403 reviews
Behrak
10 years of experience
Chrysler LHS V6-3.5L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Atlanta, Georgia
Thanks for the hard work...

Kelly

35 years of experience
173 reviews
Kelly
35 years of experience
Chrysler LHS V6-3.5L - Car is overheating - Clover, South Carolina
Kelly is very thorough and explains what the problems are and how he was taking which steps to solve. I appreciate his honesty and sincerity and has shown clearly that he has the knowledge to deal with my automotive issues!

Excellent Rating

(30)

Rating Summary
27
1
1
0
1
27
1
1
0
1
Number of Chrysler LHS services completed
330+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

Understanding the Porsche Indicator-Based System and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Porsche Indicator-Based Service system tells you when your car needs service.
3 Reasons Your Car Smells like Rotten Eggs
A sulfuric or rotten eggs smell indicates an excess of byproducts left over from failed combustion. Removing the smell requires part replacement.
How Much Do Car Maintenance Costs Increase with Mileage?
The average car costs $1,400 to maintain up to 25,000 miles, then costs rise rapidly until 100,000 miles. Toyota wins as the cheapest car to maintain.

Coolant leak needs fixing

Hi there, could you be more specific about the coolant leaking onto the ground creating a puddle or if you notice the coolant levels are low? If you notice puddles, it is most likely one of the seals for the...

Heat blowing on driver side but not passenger

The most common cause is the temperature blend door actuator for the passenger side is bad and needs replaced.

My car wants to stall when it's idling. Especially at a stop light. It stalled out almost completely until I put some antifreeze coolant, which was a little low but not empty. I am frustrated.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com